The simulation of residual stresses in friction stir welds

Journal of Mechanics of Materials and Structures

Volumn 2, Issue 5, 2007, Pages 951-964

  Zhang, Zhao ^a   Zhang, Hongwu ^a  

^a DALIAN UNIVERSITY OF TECHNOLOGY   (China)

Author keywords

Energy dissipation; Finite element method; Friction stir welding; Residual stress

Indexed keywords

EID: 34548605827     PISSN: 15593959     EISSN: None     Source Type: Journal    
DOI: 10.2140/jomms.2007.2.951     Document Type: Article

References (32)

1. [Brown et al. 1993] W. F. Brown, H. Jr. Mindlin, and C. Y. Ho, Aerospace structural metals handbook, CINDAS/Purdue University, 1993.
2. [Chao et al. 2003] Y. J. Chao, X. Qi, and W. Tang, "Heat transfer in friction stir welding - experimental and numerical studies", J. Manuf. Sci. Eng. (Trans. ASME) 125:1 (2003), 138-145.
3. [Chen and Kovacevic 2003] C. M. Chen and R. Kovacevic, "Finite element modeling of friction stir welding - thermal and thermomechanical analysis", Int. J. Mach. Tools Manuf. 43:13 (2003), 1319-1326.
4. [Chen and Kovacevic: 2004] C. M. Chen and R. Kovacevic, "Joining of A1-6061 alloy to AISI 1018 steel by combined effects of fusion and solid state welding", Int. J. Mach. Tools Manuf. 44:11 (2004), 1205-1214.
5. [Colegrove et al. 2000] P. Colegrove, M. Painter, D. Graham, and T. Miller, "3 dimensional flow and thermal modeling of the friction stir welding process", in Second international symposium on friction stir welding (Gothenburg, Sweden), TWI, Cambridge, 2000.
6. [Colligan 1999] K. Colligan, "Material flow behavior during friction stir welding of aluminum", Weld. J. (July 1999), 229-237 (supplement, Welding Research).
7. [Dalle Donne et al. 2000] C. Dalle Donne, G. Biallas, T. Ghidini, and G. Raimbeaux, "Effect of weld imperfections and residual stresses on the fatigue crack propagation in friction stir welded joints", in Second international symposium on friction stir welding (Gothenburg, Sweden), TWI, Cambridge, 2000.
8. [Dalle Donne et al. 2001] C. Dalle Donne, E. Lima, J. Wegener, A. Pyzalla, and T. Buslaps, "Investigation of residual stresses in friction stir welds", in Third international symposium on friction stir welding (Kobe, Japan), TWI, Cambridge, 2001.
9. [Deng and Xu 2001] X. Deng and S. Xu, "Solid mechanics simulation of friction stir welding process", Trans. NAMRI/SME, SME XXIX (2001), 631-638.
10. [Deng and Xu 2004] X. M. Deng and S. W. Xu, "Two-dimensional finite element simulation of material flow in the friction stir welding process", J. Manuf. Process. 6:2 (2004), 125-133.
11. [Guerra et al. 2002] M. Guerra, C. Schmidt, J. C. McClure, L. E. Murr, and A. C. Nunes, "Flow patterns during friction stir welding", Mater. Charact. 49:2 (2002), 95-101.
12. [Hornbach et al. 2003] D. Hornbach, M. Mahoney, P. Prevey, D. Waldron, and J. Cammett, "Low plasticity burnishing of friction stir welds in 2219 aluminum to increase corrosion fatigue life", pp. 302-306 in Trends in welding research, proceedings of the 6th international conference (Phoenix, 2002), edited by S. A. David et al., ASM International, Materials Park, OH, 2003.
13. [James et al. 2004] M. N. James, D. G. Hattingh, D. J. Hughes, L. W. Wei, E. A. Patterson, and J. Quinta Da Fonseca, "Synchrotron diffraction investigation of the distribution and influence of residual stresses in fatigue", Fatigue Pract. Eng. Mater. Struct. 27:7 (2004), 609-622.
14. [Li et al. 1999] Y. Li, L. E. Murr, and J. C. McClure, "Flow visualization and residual microstructures associated with the friction stir welding of 2024 and 6061 aluminum", Mater. Sci. Eng. A 271:1-2 (1999), 213-223.
15. [McClure et al. 1999] J. C. McClure, Z. Feng, W. Tang, J. E. Gould, L. E. Murr, and X. Guo, "A thermal model of friction stir welding", pp. 590-596 in Trends in welding research, proceedings of the 5th international conference (Pine Mountain, GA, 1998), edited by J. M. Vitek et al., ASM International, Materials Park, OH, 1999.
16. [Murr et al. 1998] L. E. Murr, Y. Li, and R. D. Flores, "Intercalation vortices and related microstructural features in the friction stir welding of dissimilar metals", Mater. Res. Innov. 2:3 (1998), 150-163.
17. [Murr et al. 1999] L. E. Murr, E. A. Trillo, Y. Li, R. D. Flores, B. M. Nowak, and J. C. McClure, "Solid-state flow associated with the friction stir welding of dissimilar metals", pp. 31-36 in Fluid flow phenomena in metals processing (San Diego, 1999), edited by N. El-Kaddah et al., Warrendale, PA. 1999.
18. [Peel et al. 2003] M. Peel, A. Steuwer, M. Preuss, and P. J. Withers, "Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir Welds", Acta Mater. 51:16 (2003), 4791-4801.
19. [Reynolds et al. 2003] A. P. Reynolds, W. Tang, T. Gnaupel-Herold, and P. H., "Structure, properties and residual stress of 364L stainless steel friction stir welds", Scr. Mater. 48:9 (2003), 1289-1294.
20. [Song and Kovacevic 2003] M. Song and R. Kovacevic, "Thermal modeling of friction stir welding in a moving coordinate system and its validation", Int. J. Mach. Tools Manuf. 43:6 (2003), 605-615.
21. [Staron et al. 2004] P. Staron, M. Kocak, S. Williams, and A. Wescott, "Residual stress in friction stir-welded Al sheets", Physica B Condens. Matter 350:1-3 (2004), e491-e493.
22. [Sutton et al. 2002] M. A. Sutton, A. P. Reynolds, D. Q. Wang, and C. R. Hubbard, "A study of residual stresses and microstructure in 2024-T3 aluminum friction stir butt welds", J. Eng. Mater. Technol. (Trans. ASME) 124:2 (2002), 215-221.
23. [Tang et al. 1998] W. Tang, X. Guo, J. C. McClure, and L. E. Numes, "Heat input and temperature distribution in friction stir welding", J. Mater. Process. Manuf. Sci. 7:2 (1998), 163-172.
24. [Thomas et al. 1991] W. M. Thomas, E. D. Nicholas, J. C. Needham, M. G. Murch, P. Templesmith, and C. J. Dawes, "Friction stir welding", International Patent Application No. PCT/GB92102203 and Great Britain Patent Application No. 9125978.8, 1991.
25. [Ulysse 2002] P. Ulysse, "Three-dimensional modeling of the friction stir welding irocess", Int. J. Mach. Tools Manuf. 42:14 (2002), 1549-1557.
26. [Webster et al. 2001] P.J. Webster, L. Djapic Oosterkamp, P. A. Browne, D. J. Hughes, W. P. Kang, P. J. Withers, and G. B. M. Vaughan, "Synchrotron X-ray residual strain scanning of a friction stir weld", J. Strain Anal. Eng. Des. 36:1 (2001), 61-70.
27. [Xu and Deng 2002] S. Xu and X. Deng, "A three-dimensional model for the friction stir welding process", pp. 699-704 in Proceedings of the 21st Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XXI), 2002.
28. [Xu et al. 2001] S. Xu, X. Deng, A. P. Reynolds, and T. U. Seidel, "Finite element simulation of material flow in friction stir welding", Sci. Technol. Weld. Joining 6:3 (2001), 191-193.
29. [Zhang and Zhang 2005] Z. Zhang and H. W. Zhang, "The 3D simulation of friction stir welding process", pp. 1338-1342 in International conference on mechanical engineering and mechanics (Nanjing, China), 2005.
30. [Zhang et al. 2005a] H. W. Zhang, Z. Zhang, and J. T. Chen, "Effect of angular velocity of the pin on material flow during friction stir welding", Acta Metall. Sin. 41 (2005), 853-869. In Chinese.
31. [Zhang et al. 2005b] H. W. Zhang, Z. Zhang, and J. T. Chen, "The finite element simulation of the friction stir welding process", Mater. Sci. Eng. A 403:1-2 (2005), 340-348.
32. [Zhu and Chao 2004] X. K. Zhu and Y. J. Chao, "Numerical simulation of transient temperature and residual stresses in friction stir welding of 304L. stainless steel", J. Mater. Process. Technol. 146:2 (2004), 263-272.