On the numerics and correlation of scratch testing

Journal of Mechanics of Materials and Structures

Volumn 2, Issue 3, 2007, Pages 573-594

  Wredenberg, Fredrik ^a   Larsson, Per Lennart ^a  

^a ROYAL INSTITUTE OF TECHNOLOGY   (Sweden)

Author keywords

Contact; Finite elements; Friction; Hardness; Scratch test

Indexed keywords

EID: 34548553158     PISSN: 15593959     EISSN: None     Source Type: Journal    
DOI: 10.2140/jomms.2007.2.573     Document Type: Article

References (29)

1. [ABAQUS 2004] ABAQUS, ABAQUS Manual v.6.4, ABAQUS Inc., Pawtucket RI.,USA, 2004.
2. [Atkins and Tabor 19651 A. G. Atkins and D. Tabor, "Plastic indentation in metals witir cones", Journal of The Mechanics and Physics ofSolids 13 (1965), 149-164.
3. [Bowden and Tabor 19501 F. P. Bowden and D. Tabor, The friction and lubrication of solids, Clarendoit press, 1950.
4. [Briscoe et al. 1996] B. J. Briscoe, R D. Evans, E. Pelillo, and S. K. Sinha, "Scratching maps for polymers", Wear 200 (1996), 137-147.
5. [Bucaille et al. 2001] J. L. Bucaille, E. Felder, and G. Hochstetter, "Mechanical analysis of the scratch test on elastic and perfectly plastic materials with three-dimensional finite element modeling", Wear 249 (2001), 422-432.
6. [Bucaille et al. 2004] J. L. Bucaille E. Felder, and G. Hochstetter, "Experimental and three-dimensional finite element study of scratch test of polymers at large deformation", Journal of Tribology 126 (2004), 372-379.
7. [Bull 1991] S. J. Bull, "Failure modes in scratch adhesion testing", Surface and Coatings Technology 50 (1991), 25-32.
8. [Bull 1999] S. J. Bull, "Can scratch testing be used as a model for the abrasive wear of hard coatings?", Wear 233-235 (1999). 412-423.
9. [Childs 1970] T. H., C. Childs, "The sliding of rigid cones over metals in high adhesion conditions", International Journal of Mechanical Sciences 12 (1970); 393-403.
10. [Dao et al. 2001] M. Dao, N. Chollacoop, K J. V. Vliet, T. A. Venkatesh, and, Suresh, "Computational modeling of the forward and reverse problems in instrumented sharp indentation", Acta Materialia. 49 (2001), 3899-3918.
11. [Felder and Bucaille 2006] E. Felder and J. L. Bucaille, "Mechanical analysis of the scratching of metals and polymers with conical indenters at moderate and large strains", Tribology International 39(2000, 70-87.
12. [Fleck and Hutchinson 1993] N. A. Fleck and J. W. Hutchinson, "A phenomehological theory for strain gradient effects in plasticity", Journal of the Mechanics and Physics of Solids, Volume 41 (1993). 1825-1857.
13. [Gauthier et al. 2001] C. Gauthier, S. Lafaye, and R. Schirrer, "Elastic recovery of a scratch in a polymaric surface: experiments and analysis", Tribology International 34 (2001), 469-479.
14. [Giannakopoulos et al. 1994] A. E. Giannakopoulos, P.-L. Larsson, and R. Vestergaard, "Analysis of Vickers Iindetation International journal of Solids and Structures 31 (1994), 2679-2708.
15. [Gilormini and Felder 1983] R Gilormini and E. Felder, "Theoretical and experimental study of the ploughing of a rigid-plastic, semi-infinite body by a rigid pyramidal indenter", Wear 88 (1983), 195-206.
16. [Goddard and Wilman 1962] J. Goddard and H. Wilman, "A theory of friction and wear duriag the abrasion of metals", Wear 5 (1962), 114-135.
17. [Holmberg et al. 2003] K. Holmberg, A. Laukkanen, H. Ronkainen, K. Wallin, and & Varjus, "A model fbr stresses, crack, generation and fracture toughness calculation in scratched TIN-coated steel surface", Wear 254 (2003), 278-291.
18. [Johnson 1970] K. L. Johnson, "The correlation of indentation experiments", Journal of The Mechanics and Physics of Solids 18 (1970), 115-126.
19. [Johnson 1985] K. L. Johnson, Contact mechanics, Cambridge University Press; 1985.
20. [Larsson 2001] P.-L. Larsson, "Investigation of sharp contact at rigid-plastic conditions", International Journal of Mechanical Sciences 43 (2001), 895-920.
21. [Larsson et al. 1996] P.-L. Larsson, A. E. Giannakopoulos, E. Söderlund, D. J. Rowcliffe, and R. Vestergaard, "Analysis of Berkovich indentation", International Journal of Solids and Structures 33 (1996), 221-248.
22. [Laursen and Simo 1992] T. A. Laursen and J. C. Simo, "A study of microindentation using funite elements", Journal of Materials Reasearch 7 (1992), 618-26.
23. [Malzbender and de With 2001] J. Malzbender and G. de With, "Analysis-of scratch testing of organic-inorganic coatings on glass", Thin Solid Films 386 (2001), 68-78.
24. Mata 2004] M. Mata, Continuum analysis of sharp indentation experiments in metallic materials: theory and finite element simulations., Ph.D. thesis, Universitat Politecnica de Catalunya, 2004.
25. Subhash and Zhang 2002] G. Subbash and W. Zhang, "Investigation of the overall friction coefficient mi single-pass scratch test", Wear 252 (2002), 123-134.
26. [Tabor 1951] D. Tabor, Hardness of metals, Cambridge University Press, 1951.
27. Thouless 1998] M. D. Thoulesg, "An analysis of spalling in the microscratch test", Engineering Fracture Mechanics 61 (1908), 75-81.
28. Vathaire et al. 1981] M. D. Vathaire, R Delamare, and E. Felder, "An upper bound model of ploughing by a pyramidal indenter", Wear 66 (1981), 55-64.
29. [Wredenberg and Larsson 2005] F. Wredenberg and P.-L. Larson, "Experimental and numerical analysis of the scratch test", WIT Transactions on Engineering Sciences 49 (2005), 251-260.