A neuro-genetic approach for selection of process parameters in abrasive waterjet cutting considering variation in diameter of focusing nozzle

Applied Soft Computing Journal

Volumn 8, Issue 1, 2008, Pages 809-819

  Srinivasu, D S ^a   Ramesh Babu, N ^a  

^a INDIAN INSTITUTE OF TECHNOLOGY MADRAS   (India)

Author keywords

Abrasive waterjet cutting; Artificial neural network; Control; Genetic algorithm

Indexed keywords

FLOW RATE; FUZZY LOGIC; MATHEMATICAL MODELS; NEURAL NETWORKS; NOZZLES;

ABRASIVE WATERJET CUTTING;

GENETIC ALGORITHMS;

EID: 34548494142     PISSN: 15684946     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.asoc.2007.06.007     Document Type: Article

References (51)

1. Hashish M. Wear in abrasive waterjet cutting systems. International Conference on Wear of Materials. Houston, Texas, 5-9 April (1987) 769-776
2. John Rozario Jegaraj J., and Ramesh Babu N. A strategy for efficient and quality cutting of material with abrasive waterjets considering the variation in orifice and focusing nozzle diameter. Int. J. Mach. Tools Manuf. 45 12-13 (2005) 1443-1450
3. John Rozario Jegaraj J., and Ramesh Babu N. A soft computing approach for controlling the quality of cut with abrasive waterjet cutting system experiencing orifice and focusing tube wear. J. Mater. Process. Technol. 185 1-3 (2007) 217-227
4. Kovacevic R. Monitoring the depth of abrasive waterjet penetration. Int. J. Mach. Tools Manuf. 32 (1992) 725-736
5. Hashish M. Optimization factors in abrasive waterjet machining. Trans. ASME, J. Eng. Ind. 113 (1991) 29-37
6. Nanduri M., Taggart D.G., and Kim T. Characterization of low pressure AWJ cutting. Proc. 10th American Waterjet Conference. Houston, Texas, 14-17 August (1999) 11
7. Singh P.J., Chen W.-L., and Munoz J. Comprehensive evaluation of abrasive waterjet cut surface quality. Proc. 6th American Waterjet Conference. Houston, Texas, USA (1991) 139-161
8. Guo N.S., Louis H., and Meier G. Surface structure and kerf geometry in abrasive waterjet cutting: formation and optimization. Proc. 7th American Waterjet Conference. Seattle, Washington, 28-31 August (1993) 1-14
9. Niu M.S., Kobayashi R., and Yamaguchi T. Kerf width in abrasive waterjet machining. Proc. 4th Pacific Rim International Conference on Waterjet Technology. Shimizu (1995) 59-70
10. Kovacevic R., and Evizi M. Nozzle wear detection in abrasive waterjet cutting system. Mater. Eval. 48 (1990) 348-353
11. Kovacevic R. A new sensing system to monitor abrasive waterjet nozzle. J. Mater. Process. Technol. 28 1-2 (1991) 117-125
12. Kovacevic R., and Chen G. A work piece reactive force as a parameter for monitoring the nozzle wear in turning operation with abrasive waterjet. High energy beam manufacturing technologies, Winter annual meeting of ASME. Sanfrancisco, California, PED, vol. 41 (1989) 43-49
13. Kovacevic R., Wang L., and Zhang Y.M. Identification of abrasive waterjet nozzle wear based on parametric spectrum estimation of acoustic signal. Proceedings of the Institution of Mechanical Engineers. Part B J. Eng. Manuf. 208 (1994) 173-181
14. Kovacevic R. Development of opto-electric sensing system to monitor the abrasive waterjet nozzle wear. Sens., Contr., Qual. Issues Manuf., ASME, PED 55 (1991) 73-81
15. Kovacevic R., and Fang M. Modeling of the influence of abrasive waterjet cutting parameters on the depth of cut based on fuzzy rules. Int. J. Mach. Tools Manuf. 34 1 (1994) 55-72
16. Hassan A.I., Chen C., and Kovacevic R. Online monitoring of depth of cut in AWJ cutting. Int. J. Mach. Tools Manuf. 44 (2004) 595-605
17. Srinivasu D.S., Ramesh Babu N., and Srinivasa Y.G. Neuro-genetic approach for automatic selection of process parameters in abrasive waterjet cutting considering the variation in bore diameter of focusing nozzle. Proc. 21st All India Manufacturing Technology Design and Research Conference. Vellore, India, 20-22 December (2004) 887-893
18. Srinivasu D.S., Ramesh Babu N., and Srinivasa Y.G. Artificial neural networks for prediction of separation depth of cut in abrasive water jet cutting with varying size of focusing nozzle. Proc. International Conf. on Emerging Technologies in Intelligent System and Control. Coimbatore, India, 5-7 January (2005)
19. Srinivasu D.S., Ramesh Babu N., and Srinivasa Y.G. Prediction of depth of cut in Abrasive waterjet cutting with varying size of focusing nozzle using neural networks with genetic algorithms based weights selection. Proc. 4th National Conference on Precision Engineering. Kolkata, 16-17 December (2005) 174-179
20. Hashish M. A modeling study of metal cutting with abrasive waterjets, Transactions of ASME. J. Eng. Mater. Technol. 106 (1984) 88-100
21. Hashish M. A model for abrasive waterjet machining. Trans. ASME, J. Eng. Mater. Technol. 111 (1989) 154-162
22. Wilkins R.J., and Graham E.E. An erosion model for waterjet cutting. Trans. ASME, J. Eng. Ind. 115 (1993) 57-61
23. Kiyohashi H., Kyo M., Sekiguchi R., Matushita Y., and Tokioka M. Experiments and multivariate analysis of hot dry rock cutting with high pressure water jets. Proc. 10th International Conference on Jet cutting Technology. Amsterdam, Netherlands (1991) 385-397
24. Blickwedel H., Guo N.S., Haferkamp H., and Louis H. Prediction of abrasive jet cutting efficiency and quality. Proc. 10th International conference on Jet Cutting Technology. Amsterdam, Netherlands, October 31-November 2 (1991) 163-180
25. Chakravarthy P.S., and Ramesh Babu N. A hybrid approach for selection of optimal process parameters in abrasive water jet cutting. Proceedings of the Institution of Mechanical Engineers. Part B: J. Eng. Manuf. 214 (2000) 781-791
26. Babets K., Geskin E.S., and Chaudhuri B. Neural network model of waterjet depainting process. Proc. 10th American Waterjet Conference. Houston, Texas, 14-17 August (1999) 4
27. Babets K., and Geskin E.S. Fuzzy logic model of waterjet depainting: grapho-analytical approach. Proc. 10th American Waterjet Conference. Houston, Texas, 14-17 August (1999) 6
28. Babets K., and Geskin E.S. Application of fuzzy logic for modeling of waterjet depainting. Mach. Sci. Technol. 4 1 (2000) 81-100
29. Babets K., and Geskin E.S. Development of a generic procedure for modeling of the waterjet cleaning. WJTA American waterjet conference. Minneapolis, Minnesota, 18-21 August (2001) 58
30. Dao-ming G.A.O., Jie C.H.E.N., and Jun-bo L.U. Fuzzy prediction and experimental verification of road surface cleaning rate by pure waterjets. J. Zhejiang Univ. Sci. 6A 10 (2005) 1115-1121
31. Babets K., and Geskin E.S. Application of soft-computing techniques for modeling and optimization of waterjet based surface processing. Proc. 15th International Conf. on Jetting Technology. Sweden, 6-8 September (2000) 297-308
32. Lu Y., Li X., Jiao B., and Liao Y. Application of artificial neural networks in abrasive water jet cutting process. International Symposium on Neural Networks. Chongqing, China, May 30-January 1 (2005) 877-882
33. Srinivasu D.S., Ramesh Babu N., Srinivasa Y.G., Louis H., Peter D., and Versemann R. Genetically evolved artificial neural networks built with sparse data for predicting depth of cut in abrasive water jet cutting. Proc. American Waterjet Conference. Houston, Texas, 21-23 August (2005) (paper 5A-4)
34. Geiger M., Kach A., Hohenstein R., and Maros Z. Fuzzy-logic based knowledge representation for water jet cutting of light-weight composites. Mach. Sci. Technol. 7 3 (2003) 349-360
35. Chryssolouris G., and Gulliot M. A comparison of statistical and AI approaches to the selection of process parameters in intelligent machining. Trans. ASME J. Eng. Ind. 112 (1990) 122-131
36. Yeh Z.-M., and Li K.-H. A systematic approach for designing multistage fuzzy control systems. Fuzzy Syst. 143 (2004) 251-273
37. Manuel Fernandez Salido J., and Murakami S. A comparison of two learning mechanisms for automatic design of fuzzy systems for rotating machinery. Appl. Soft Comput. 4 (2004) 413-422
38. Mazurkiewicz M. A manufacturing tool for a new century. J. Mater. Process. Technol. 106 (2000) 112-118
39. Grefenstette J.J. Optimization of control parameters for genetic algorithms. IEEE Trans. Syst. Man Cybern. 16 1 (1986) 122-128
40. Kim M.K., Cho M.W., and Kim K. Application of the fuzzy control strategy to adaptive force control of non-minimum phase end milling operations. Int. J. Mach. Tools Manuf. 34 5 (1994) 677-696
41. Liao Y.S., and Woo J.C. Design of a fuzzy controller for the adaptive control of WEDM process. Int. J. Mach. Tools Manuf. 40 (2000) 2293-2307
42. Yang M.-Y., and Lee T.-M. Hybrid adaptive control based on the characteristics of CNC end milling. Int. J. Mach. Tools Manuf. 42 (2002) 489-499
43. Jiao Y., Lei S., Pei Z.J., and Lee E.S. Fuzzy adaptive networks in machining process modeling: surface roughness prediction for turning operations. Int. J. Mach. Tools Manuf. 44 (2004) 1643-1651
44. Ho K.H., Newman S.T., Rahimifard S., and Allen R.D. State of the art in wire electrical discharge machining (WEDM). Int. J. Mach. Tools Manuf. 44 12-13 (2004) 1247-1259
45. Liang S.Y., Hecker R.L., and Landers R.G. Machining process monitoring and control: the state-of-the-art. Trans. ASME, J. Manuf. Sci. Eng. 126 (2004) 297-310
46. Lippman R.P. An introduction to computing with neural nets. Acoustics, Speech, Signal Process. Mag. 4 2 (1987) 4-22
47. Cybenko G. Approximation by super positions of a sigmoidal function. Math. Control, Signals, Syst. 2 (1989) 303-314
48. Deb K. Multi-Objective Optimization using Evolutionary Algorithms (2002), John Wiley & Sons Ltd., England
49. Goldberg D.E., and Deb K. A comparison of selection schemes used in genetic algorithms. In: Rawlins G.J.E. (Ed). Foundations of Genetic Algorithms-I (1991) pp. 69-93
50. Deb K., and Agrawal R.B. Simulated binary crossover for continuous search space. Complex Syst. 9 (1995) 115-148
51. Deb K. Mechanical component design using genetic algorithms. In: Dasgupta D., and Michalewicz Z. (Eds). Evolutionary Algorithms in Engineering Applications (1997), Springer, New York 495-512