Testing of protective effect against liquid chemicals

Protective Gloves for Occupational Use, Second Edition

Volumn , Issue , 2004, Pages 71-88

  Mellström, Gunh A ^a   Carlsson, Birgitta ^b   Boman, Anders ^c  

^a MEDICAL PRODUCTS AGENCY   (Sweden)

^b Swedish Work Environment Authority   (Sweden)

^c STOCKHOLM COUNTY COUNCIL   (Sweden)

Author keywords

[No Author keywords available]

Indexed keywords

EID: 34548382353     PISSN: None     EISSN: None     Source Type: Book    
DOI: None     Document Type: Chapter

References (55)

1. ASTM F 739-85, Standard Test Method: Resistance of Protective Clothing Materials to Permeation by Liquids or Gases, Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, 1986, 426.
2. European Standard, EN 374-1: Protective Gloves against Chemicals and Microorganisms. Part 1: Terminology and Performance Requirements, Comité Européen de Normalisation (CEN/TC 162), Brussels, April 1992.
3. European Standard, EN 374-3: Protective Gloves against Chemicals and Microorganisms. Part 3: Determination of Resistance to Permeations to Chemicals, Comité Européen de Normalisation (CEN/TC 162), Brussels, April 1992.
4. Stampfer, J.F., Beckman, R.J., and Berardinelli, S.P., Using immersion test data to screen chemical protective clothing, Am. Ind. Hyg. Assoc. J., 49, 579, 1988.
5. Schwope, A.D., Carroll, T.R., Huang, R., and Royer, M.D., Test kit for field evaluation of the chemical resistance of protective clothing, Performance of Protective Clothing:Second Symposium, ASTM STP 989, Mansdorf, S.Z., Sager, R., and Nielsen, A.P., Eds., American Society for Testing and Materials, Philadelphia, 1988, 314.
6. Henry, N.W., III, A critical evaluation of protective clothing test methods, Proceedings from Second Scandinavian Symposium on Protective Clothing against Chemicals and Other Health Risks, 7-8 Nov. 1986, Arbete & Hälsa, 1987:12, Mellström, G. and Carlsson, B., Eds., National Board of Occupational Safety and Health, Stockholm, 1987, 65.
7. Berardinelli, S. and Roder, M., Chemical protective clothing field evaluation methods, Performance of Protective Clothing: First Symposium, ASTM STP 900, Barker, R.L. and Coletta, G.C., Eds., American Society for Testing and Materials, Philadelphia, 1986, 250.
8. ASTM F 739-81, Test for Resistance of Protective Clothing Materials to Permeation by Hazardous Liquid Chemicals, Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, 1981, 1.
9. ASTM F 739-99a, Standard Test Method: Resistance of Protective Clothing Materials to Permeation by Liquids or Gases under Continuous Conditions, Annual Book of ASTM Standards, 2003, American Society for Testing and Materials, Philadelphia.
10. European Standard, EN 374-2: Protective Gloves against Chemicals and Microorganisms. Part 2: Determination of Resistance to Penetration, Comité Européen de Normalisation (CEN/TC 162), Brussels, April, 1992.
11. European Standard, EN 374-3: Protective Gloves against Chemicals and Microorganisms. Part 3: Determination of Resistance to Permeation by Chemicals, Comité Européen de Normalisation (CEN/TC 162), Brussels, April 1992.
12. Australian Standards. Committee SF-203-Current Publications: Occupational Protective Gloves. Standards Australia International Ltd, 286, Sussex Street Sydney NSW 2000, Australia Standards Australia; http://committees.standards.com.au/COMMITTEES/SF-023/PRODUCTS/, September 2003.
13. Protective Clothing-Protection against Liquid Chemicals-Determination of Resistance of Air-Impermeable Materials to Permeation by Liquids, International Standard ISO 6529.2001, ISO, International Organization for Standardization, TC94/SC13, Geneva, 1, 2000.
14. Berardinelli, S.P. and Hall, R., Site-specific whole glove chemical permeation, Am. Ind. Hyg. Assoc. J., 46, 60, 1985.
15. Vahdat, N., Permeation of polymeric materials by toluene, Am. Ind. Hyg. Assoc. J., 48, 155, 1987.
16. ASTM F 1383. Standard Test Method: Resistance of Protective Clothing Materials to Permeation by Liquids or Gases under Conditions of Intermittent Contact, Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, April, 2003.
17. Berardinelli, S.P. and Moyer, E.S., Chemical protective clothing breakthrough time:comparison of several test systems, Am. Ind. Hyg. Assoc. J., 49, 89, 1988.
18. Berardinelli, S.P., Mickelsen, P., and Roder, M.M., Chemical protective clothing: a comparison of chemical permeation test cells and direct-reading instruments, Am. Ind. Hyg. Assoc. J., 44, 886, 1983.
19. Berardinelli, S.P., Rusczek, R.A., and Mickelsen, R.L., A portable chemical protective clothing test method: application at a chemical plant, Am. Ind. Hyg. Assoc. J., 48, 804, 1987.
20. Jencen, D.A. and Hardy, J.K., Method for the evaluation of the permeation characteristics of protective glove materials, Am. Ind. Hyg. Assoc. J., 49, 293, 1988.
21. Henry, N.W., III, Comparative evaluation of a smaller version of the ASTM permeation test cell versus the standard cell, Performance of Protective Clothing: Second Symposium, ASTM STP 989, Mansdorf, S.Z., Sager, R., and Nielsen, A.P., Eds., American Society for Testing and Materials, Philadelphia, 1988, 236.
22. Moody, R.P. and Ritter, L., Pesticide glove permeation analysis: comparison of the ASTM F 739 test method with an automatic flow-through reverse-phase liquid chromatography procedure, Am. Ind. Hyg. Assoc. J., 51, 79, 1990.
23. Schwope, A.D., Costas, P.P., Mond, C.M., Nolen, R.L., Conoley, M., Garcia, D.B., Walters, D.B., and Prokopetz, A.T., Gloves for protection from aqueous formaldehyde:permeation resistance and human factors analysis, Appl. Am. Ind. Hyg., III, 6, 1988.
24. Schwope, A.D., Goydan, R., Reid, R.C., and Krishnamurthy, S., State-of-the-art review of permeation testing and the interpretation of its results, Am. Ind. Hyg. Assoc. J., 49, 557, 1988.
25. Patton, G.L., Conoley, M., and Keith, L.H., Problems in determining permeation cell equivalency, Performance of Protective Clothing: Second Symposium, ASTM STP 989, Mansdorf, S.Z., Sager, R., and Nielsen, A.P., Eds., American Society for Testing and Materials, Philadelphia, 1988, 243.
26. Billing, C.B. and Bentz, A.P., Effect of temperature, material thickness and experimental apparatus on the permeation measurement, Performance of Protective Clothing:Second Symposium, ASTM STP 989, Mansdorf, S.Z., Sager, R., and Nielsen, A.P., Eds., American Society for Testing and Materials, Philadelphia, 1988, 226.
27. Nelson, G.O., Lum, B.B., Carlson, G.J., Wong, C.M., and Johnson, J.S., Glove permeation by organic solvents, Am. Ind. Hyg. Assoc. J., 42, 217, 1981.
28. Jamke, R.A., Understanding and using chemical permeation data in the selection of chemical protective clothing, Chemical Protective Clothing Performance in Chemical Emergency Response, ASTM STP 1037, Perkins, J.L. and Stull, J.O., Eds., American Society for Testing and Materials, Philadelphia, 1989, 11.
29. Kairys, C.J., MDPR-The need for minimum detectable permeation rate requirement in permeation testing of chemical protective clothing, Chemical Protective Clothing Performance in Chemical Emergency Response, ASTM STP 1037, Perkins, J.L. and Stull, J.O., Eds., American Society for Testing and Materials, Philadelphia, 1989, 265.
30. Mellström, G.A., Carlsson, B., and Boman, A., Testing protective effect against liquid chemicals, in Protective Gloves for Occupational Use, Mellström, G.A., Wahlberg, J.E., and Maibach, H.I., Eds., CRC Press, Boca Raton, FL, 1994.
31. Zellers, E.T. and Sulewski, R., Modeling the temperature dependence of N-methylpyrrolidone permeation through butyl- and natural-rubber gloves, Am. Ind. Hyg. Assoc. J., 54, 465, 1993.
32. Anna, D.H., Zellers, E.T., and Sulewski, R., ASTM F 739 method for testing the permeation resistance of protective clothing materials: critical analysis with proposed changes in procedure and test-cell design, Am. Ind. Hyg. Assoc. J., 59, 547, 1998.
33. Mäkelä, E.A., Vainiotalo, S., and Peltonen, K., Permeation of 70% isopropyl alcohol through surgical gloves: comparison of the standard methods ASTM F 739 and EN 374, Ann. Occup. Hyg., 47, 305, 2003.
34. Man, V.L., Bastecki, V., Vandal, G., and Bentz, A., Permeation of protective clothing materials: comparison of liquid contact, liquid splashes and vapors on breakthrough times, Am. Ind. Hyg. Assoc. J., 48, 551, 1987.
35. Perkins, J.L., Chemical protective clothing: I. Selection and use, Appl. Ind. Hyg., 2, 222, 1988.
36. Mellström, G.A., Protective gloves of polymeric materials: experimental permeation testing and clinical study of side effects, Arbete och Hälsa, National Board of Occupational Safety and Health, Stockholm, 15, 1991.
37. Leinster, P., Bonsall, J.L., Evans, M.J., and Lewis, S.J., The application of test data in the selection and use of the gloves against chemicals, Ann. Occup. Hyg., 34, 85, 1990.
38. Colligan, S.A. and Horstman, S.W., Permeation of cancer chemotherapeutic drug through glove materials under static and flexed conditions, Appl. Occup. Environ. Hyg., 5(12), 848, 1990.
39. Que Hee, S.S., Permeation of some pesticidal formulations through glove materials, Chemical Protective Clothing Performance in Chemical Emergency Response, ASTM STP 1037, Perkins, J.L. and Stull, J.O., Eds., American Society for Testing and Materials, Philadelphia, 1989, 157.
40. Ehntholt, D.J., Cerundolo, D.L., Bodek, I., Schwope, A.D., Royer, M.D., and Nielsen, A.P., A test method for the evaluation of protective glove materials used in agricultural pesticide operations, Am. Ind. Hyg. Assoc. J., 51, 462, 1990.
41. Ehntholt, D.J., Almeida, R.F., Beltis, K.J., Cerundolo, D.L., Schwope, A.D., Whelan, R.H., Royer, M.D., and Nielsen, A.P., Test method development and evaluation of protective clothing items used in agricultural pesticide operations, Performance of Protective Clothing: Second Symposium, ASTM STP 989, Mansdorf, S.Z., Sager, R., and Nielsen, A.P., Eds., American Society for Testing and Materials, Philadelphia, 1988, 727.
42. Ehntholt, D.J., Bodek, I., Valentine, J.R., Schwope, A.D., Royer, M.D., Frank, U., and Nielsen, A.P., The effects of solvent type and concentration on the permeation of pesticide formulations through chemical materials protective glove, Chemical Protective Clothing Performance in Chemical Emergency Response, ASTM STP 1037, Perkins, J.L. and Stull, J.O., Eds., American Society for Testing and Materials, Philadelphia, 1989, 146.
43. Pinette, M.F.S., Stull, J.O., Dodgen, C.R., and Morley, M.G., A preliminary study of an intermittent collection procedure as an alternative permeation method for nonvolatile, water soluble chemicals, Performance of Protective Clothing: Fourth Volume, ASTM STP 1133, McBriarty, J.P. and Henry, W.N., Eds., American Society for Testing and Materials, Philadelphia, 1992, 339.
44. Spence, M.W., An analytical technique for permeation testing of compounds with low volatility and water solubility, Performance of Protective Clothing: Second Symposium, ASTM STP 989, Mansdorf, S.Z., Sager, R., and Nielsen, A.P., Eds., American Society for Testing and Materials, Philadelphia, 1988, 277.
45. Lara, J. and Drolet, D., Testing the resistance of protective clothing materials to nitroglycerin and ethylene glycol dinitrate, Performance of Protective Clothing:Fourth Volume, ASTM STP 1133, McBriarty, J.P. and Henry, W.N., Eds., American Society for Testing and Materials, Philadelphia, 1992, 153.
46. ASTM F 903, Standard Test Method: Resistance of Protective Clothing Materials to Penetration by Liquids, Annual Book of ASTM Standards, American Society for Testing and Materials, Philadelphia, 2003.
47. European Standard, EN 455-1: Medical Gloves for Single Use. Part 1: Requirement and Testing for Freedom from Holes, Comité Européen de Normalisation (CEN/TC 205/WG 3), Brussels, July 1991.
48. International Standard ISO 2859-1974 (E): Sampling Procedures and Tables for Inspection by Attributes, ISO, International Organization for Standardization, 1974.
49. Berardinell, S.P. and Cottingham, L., Evaluation of chemical protective garment seams and closures for resistance to liquid penetration, Performance of Protective Clothing: First Symposium, ASTM STP 900, Barker, R.L. and Coletta, G.C., Eds., American Society for Testing and Materials, Philadelphia, 1986, 263.
50. Carey, R., Herman, W., Herman, B., and Casamento, J., A laboratory evaluation of standard leakage tests for surgical and examination gloves, J. Clin. Eng., 14, 133, 1989.
51. Kotilainen, H.R., Brinker, J.P., Avato, J.L., and Gantz, N.M., Latex and vinyl examination gloves. Quality control procedures and implications for health care workers, Arch. Intern. Med., 149, 2749, 1989.
52. Kotilainen, H.R., Avato, J.L., and Gantz, N.M., Latex and vinyl nonsterile examination gloves: status report on laboratory evaluation of defects by physical and biological methods, Appl. Environ. Microbiol., June, 1627, 1990.
53. Kotilainen, H.R., Cyr, W.H., Truscott, W., Nelson, M.G., Routson, L.B., and Lytle, C.D., Ability of 1000 mL water leak test for medical gloves to detect gloves with potential for virus penetration, Performance of Protective Clothing: Fourth Volume, ASTM STP 1133, McBriarty, J.P. and Henry, W.N., Eds., American Society for Testing and Materials, Philadelphia, 1992, 38.
54. Douglas, A.A., Neufeld, P.D., and Wong, R.K.W., An interlaboratory comparison of standard test methods for medical gloves, Performance of Protective Clothing: Fourth Volume, ASTM STP 1133, McBriarty, J.P. and Henry, W.N., Eds., American Society for Testing and Materials, Philadelphia, 1992, 99.
55. Stull, J.O., White, D.F., and Greimel, T.C., A comparison of the liquid penetration test with other chemical resistance tests and its application in determining the performance of protective clothing, Performance of Protective Clothing: Fourth Volume, ASTM STP 1133, McBriarty, J.P. and Henry, W.N., Eds., American Society for Testing and Materials, Philadelphia, 1992, 123.