The effects of shear and near tip deformations on energy release rate and mode mixity of edge-cracked orthotropic layers

Engineering Fracture Mechanics

Volumn 74, Issue 17, 2007, Pages 2700-2720

  Andrews, Martin G ^a   Massabò, Roberta ^b  

^a Northwestern University   (United States)

^b UNIVERSITY OF GENOA   (Italy)

Author keywords

Crack mechanics; Mixed mode fracture; Mode decomposition; Orthotropic materials; Root rotations; Stress intensity factors

Indexed keywords

BENDING MOMENTS; CRACKS; DELAMINATION; ENERGY RELEASE RATE; SHEAR DEFORMATION; STRESS INTENSITY FACTORS;

CRACK MECHANICS; MIXED MODE FRACTURE; ORTHOTROPIC MATERIALS; ROOT ROTATION;

FRACTURE MECHANICS;

BENDING MOMENTS; CRACKS; DELAMINATION; ENERGY RELEASE RATE; FRACTURE MECHANICS; SHEAR DEFORMATION; STRESS INTENSITY FACTORS;

EID: 34548278482     PISSN: 00137944     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.engfracmech.2007.01.013     Document Type: Article

References (37)

1. Tada H., Paris P.C., and Irwin G.R. The stress analysis of cracks handbook (1985), Paris Productions Inc., Louis, Missouri
2. Williams J.G. On the calculation of energy release rate for cracked laminates. Int J Fracture 36 (1988) 101-119
3. Suo Z.G. Delamination specimens for orthotropic materials. J Appl Mech 57 3 (1990) 627-634
4. Schapery R.A., and Davidson B.D. Prediction of energy release rate for mixed-mode delamination using classical plate theory. Appl Mech Rev 43 (1990) S281-S287
5. Hutchinson J.W., and Suo Z.G. Mixed-mode cracking in layered materials. Adv Appl Mech 29 (1992) 63-191
6. Davidson B.D., Hu H.R., and Schapery R.A. An analytical crack-tip element for layered elastic structures. J Appl Mech 62 2 (1995) 294-305
7. Sheinman I., and Kardomateas G. Energy release rate and stress intensity factors for delaminated composite laminates. Int J Solids Struct 34 4 (1997) 451-459
8. Fett T., and Munz D. Stress intensity factors and weight functions (1997), Computational Mechanics Publications, Southampton, UK
9. Bruno D., and Greco F. Mixed-mode delamination in plates: a refined approach. Int J Solids Struct 38 50-51 (2001) 9149-9177
10. Zou Z., Reid S.R., Soden P.D., and Li S. Mode separation of energy release rate for delamination in composite laminates using sublaminates. Int J Solids Struct 38 (2001) 2597-2613
11. Li S., Wang J., and Thouless M.D. The effects of shear on delamination in layered materials. J Mech Phys Solids 52 1 (2004) 193-214
12. Wang J., and Qiao P. Interface crack between two shear deformable elastic layers. J Mech Phys Solids 52 (2004) 891-905
13. Bruno D., Greco F., and Lonetti P. A coupled interface-multilayer approach for mixed mode delamination and contact analysis in laminated composites. Int J Solids Struct 40 (2003) 7245-7268
14. Nilsson K.-F., Asp L.E., Alpman J.E., and Nystedt L. Delamination buckling and growth for delaminations at different depths in a slender composite panel. Int J Solids Struct 38 (2001) 3039-3071
15. Sih G.C., Paris P.C., and Irwin G.R. On cracks in rectilinear anisotropic bodies. Int J Fracture 1 (1965) 189-203
16. Andrews M.G., Massabò R., and Cox B.N. Elastic interaction of multiple delaminations in plates subject to cylindrical bending. Int J Solids Struct 43 5 (2006) 855-886
17. Andrews MG. The static and dynamic interaction of multiple delaminations in plates subject to cylindrical bending. Dissertation, PhD degree, Northwestern University, Evanston, IL, USA, 2005.
18. Pandey R.K., and Sun C.T. Calculating strain energy release rate in cracked orthotropic beams. J Thermoplast Compos Mater 9 4 (1996) 381-395
19. Yu H.-H., and Hutchinson J.W. Influence of substrate compliance on buckling delamination of thin films. Int J Fracture 113 (2002) 39-55
20. Yang Q.D., and Volinsky A.A. Effects of near-tip rotation on pre-buckle crack growth of compressed beams bonded to a rigid substrate. Int J Solids Struct 41 (2004) 2711-2729
21. Sun C.T., and Pandey R.K. Improved method for calculating strain energy release rate based on beam theory. AIAA J 32 1 (1994) 184-189
22. Rice J.R. A path independent integral and approximate analysis of strain concentration by notches and cracks. J Appl Mech 35 2 (1968) 379-386
23. Fraisse P., and Schmit F. Use of J-integral as fracture parameter in simplified analysis of bonded joints. Int J Fracture 63 (1993) 59-73
24. Hellan K. Debond dynamics of an elastic strip, I: Timoshenko-beam properties and steady motion. Int J Fracture 14 1 (1978) 91-100
25. Suo Z.G., and Hutchinson J.W. Steady-state cracking in brittle substrates beneath adherent films. Int J Solids Struct 25 (1989) 1337-1353
26. Suo Z.G., and Hutchinson J.W. Sandwich test specimens for measuring interface crack toughness. Mater Sci Engng A 107 (1989) 135-143
27. Bao G., Ho S., Suo Z., and Fan B. The role of material orthotropy in fracture specimens for composites. Int J Solids Struct 29 9 (1992) 1105-1116
28. He M.-Y., and Evans A.G. Finite-element analysis of beam specimens used to measure the delamination resistance of composites. J Compos Technol Res 14 4 (1992) 235-240
29. Reeder J.R., and Crews J.H. Mixed-mode bending method for delamination testing. AIAA J 28 7 (1990) 1270-1276
30. Suo Z., Bao G., Fan B., and Wang T.C. Orthotropy rescaling and implications for fracture in composites. Int J Solids Struct 28 (1991) 235-248
31. Massabò R., Brandinelli L., and Cox B.N. Mode I weight functions for an orthotropic double cantilever beam. Int J Engng Sci 41 (2003) 1497-1518
32. Gross B, Srawley JE. Stress intensity factors by boundary collocation for Single-Edge-Notch specimens subjected to splitting forces. 1966. NASA TN D-3295.
33. Kanninen M.F. Augmented double cantilever beam model for studying crack propagation and arrest. Int J Fracture 9 1 (1973) 83-92
34. Brandinelli L., and Massabò R. Mode II weight functions for isotropic and orthotropic double cantilever beams. Int J Fracture 139 (2006) 1-25
35. Timoshenko S.P., and Goodier J.N. Theory of elasticity. 3rd ed. (1970), McGraw-Hill, USA
36. Choi I., and Horgan C.O. Saint Venant's principle and end effects in anisotropic elasticity. J Appl Mech (1977) 424-430
37. Chan S.K., Tuba I.S., and Wilson W.K. On the finite element method in linear fracture mechanics. Engng Fract Mech 2 1 (1970) 1-17