The influence of surface modification on the structure and properties of a nanosilica filled thermoplastic elastomer

Composites Science and Technology

Volumn 67, Issue 13, 2007, Pages 2854-2863

  Aso, O ^a   Eguiazabal J I ^a   Nazabal J ^a  

^a UNIVERSITY OF THE BASQUE COUNTRY UPV EHU   (Spain)

Author keywords

A. Particle reinforced composites; B. Mechanical properties; E. Extrusion; Nanosilica

Indexed keywords

CREEP RESISTANCE; ELONGATION; EXTRUSION; MECHANICAL PROPERTIES; MORPHOLOGY; SILICA; STRUCTURE (COMPOSITION); SURFACE TREATMENT; THERMOPLASTIC ELASTOMERS;

DISPERSED PHASE MORPHOLOGY; NANOSILICA FILLED THERMOPLASTIC ELASTOMER; PARTICLE-REINFORCED COMPOSITES;

NANOCOMPOSITES;

BREAKING ELONGATION; CHEMICAL MODIFICATION; CREEP; CRYSTALLINITY; DISPERSION; ELASTIC MODULUS; MECHANICAL PROPERTY; MORPHOLOGY; NANOCOMPOSITE; STRUCTURAL PROPERTY; SURFACE MODIFICATION; THERMOPLASTIC POLYMER;

EID: 34548106000     PISSN: 02663538     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.compscitech.2007.01.021     Document Type: Article

References (64)

1. Wu C.L., Zhang M.Q., Rong M.Z., and Friedrich K. Silica nanoparticles filled polypropylene: effects of particle surface treatment, matrix ductility and particle species on mechanical performance of the composites. Comp Sci Technol 65 3-4 (2005) 635-645
2. 2 nanocomposites with improved mechanical properties. Rev Adv Mater Sci 6 2 (2004) 169-175
3. Rong M.Z., Zhang M.Q., Zheng Y.X., Zeng H.M., Walter R., and Friedrich K. Structure-property relationships of irradiation grafted nano-inorganic particle filled polypropylene composites. Polymer 42 1 (2001) 167-183
4. Ou Y.C., Yang F., and Yu Z.Z. New conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization. J Polym Sci Pol Phys 36 5 (1998) 789-795
5. Wu C.L., Zhang M.Q., Rong M.Z., and Friedrich K. Tensile performance improvement of low nanoparticles filled-polypropylene composites. Comp Sci Technol 62 10-11 (2002) 1327-1340
6. Zhang M.Q., Rong M.Z., Zhang H.B., and Friedrich K. Mechanical properties of low nano-silica filled high density polyethylene composites. Polym Eng Sci 43 2 (2003) 490-500
7. Chan C.M., Wu J.S., Li J.X., and Cheung Y.K. Polypropylene/calcium carbonate nanocomposites. Polymer 43 10 (2002) 2981-2992
8. Xanthos M. Functional fillers for plastics (2005), WILEY-VCH Verlag GmbH & Co KGaA, Weinheim
9. 3 particulates. Mater Chem Phys 90 1 (2005) 185-195
10. Jana S.C., and Jain S. Dispersion of nanofillers in high performance polymers using reactive solvents as processing aids. Polymer 42 16 (2001) 6897-6905
11. Zhang Z., Yang J.L., and Friedrich K. Creep resistant polymeric nanocomposites. Polymer 45 10 (2004) 3481-3485
12. Yang J.L., Zhang Z., Schlarb A.K., and Friedrich K. On the characterization of tensile creep resistance of polyamide 66 nanocomposites. Part I. Experimental results and general discussions. Polymer 47 8 (2006) 2791-2801
13. 3 nanocomposites with nonionic modifier. Polymer 45 17 (2004) 5985-5994
14. 3. Eur Polym J 40 10 (2004) 2357-2363
15. Petrovic Z.S., Javni I., Waddon A., and Banhegyi G. Structure and properties of polyurethane-silica nanocomposites. J Appl Polym Sci 76 2 (2000) 133-151
16. Petrovicova E., Knight R., Schadler L.S., and Twardowski T.E. Nylon 11/silica nanocomposite coatings applied by the HVOF process. II. Mechanical and barrier properties. J Appl Polym Sci 78 13 (2000) 2272-2289
17. 2 nanocomposites: transport properties. Polym Eng Sci 44 7 (2004) 1240-1246
18. Di Lorenzo M.L., Errico M.E., and Avella M. Thermal and morphological characterization of poly(ethylene terephthalate)/calcium carbonate nanocomposites. J Mater Sci 37 11 (2002) 2351-2358
19. Kim S.H., Ahn S.H., and Hirai T. Crystallization kinetics and nucleation activity of silica nanoparticle-filled poly(ethylene 2,6-naphthalate). Polymer 44 19 (2003) 5625-5634
20. 2 composites. J Appl Polym Sci 91 2 (2004) 1013-1019
21. Yang F., Ou Y.C., and Yu Z.Z. Polyamide 6-silica nanocomposites prepared by in situ polymerization. J Appl Polym Sci 69 2 (1998) 355-361
22. 2 nanocomposites. Polym Adv Technol 15 4 (2004) 164-172
23. 2 particles. Polymer 45 6 (2004) 1913-1922
24. Lee M.W., Hu X., Yue C.Y., Li L., Tam K.C., and Nakayama K. Novel approach to fibrillation of LCP in an LCP/PP blend. J Appl Polym Sci 86 8 (2002) 2070-2078
25. 2 in-situ hybrid nanocomposites. Comp Sci Technol 63 3-4 (2003) 339-346
26. Lee M.W., Hu X., Li L., Yue C.Y., Tam K.C., and Cheong L.Y. PP/LCP composites: effects of shear flow, extensional flow and nanofillers. Comp Sci Technol 63 13 (2003) 1921-1929
27. 3. Polym Eng Sci 43 3 (2003) 647-660
28. Hrnjak-Murgic Z., Jelcic Z., Kovacevic V., Mlinac-Misak M., and Jelencic J. Molecular and morphological characterization of immiscible SAN/EPDM blends filled by nano filler. Macromol Mater Eng 287 10 (2002) 684-692
29. 2 in polycarbonate matrix. Polymer 47 1 (2006) 448-456
30. 2/PP/LCP ternary composites: effects of filler properties and mixing sequence. Polym Int 52 2 (2003) 276-284
31. 2 nanocomposites prepared by melt mixing. Eur Polym J 41 9 (2005) 1965-1978
32. 2 on the performance of nanocomposites. Mater Lett 57 19 (2003) 2940-2944
33. Rothon R. Particulate-filled polymer composites (1995), Longman, London
34. 2 in situ polymerization. J Appl Polym Sci 84 4 (2002) 827-834
35. Zhang L., Tam K.C., Gan L.H., Yue C.Y., Lam Y.C., and Hu X. Effect of nano-silica filler on the rheological and morphological properties of polypropylene/liquid-crystalline polymer blends. J Appl Polym Sci 87 9 (2003) 1484-1492
36. 2 nanocomposites. Thermochim Acta 427 1-2 (2005) 117-128
37. 2 nanocomposites. Polymer 47 4 (2006) 1267-1280
38. Chung S.C., Hahm W.G., Im S.S., and Oh S.G. Poly(ethylene terephthalate) (PET) nanocomposites filled with fumed silicas by melt compounding. Macromol Res 10 4 (2002) 221-229
39. 2 ternary composites. Polymer 47 6 (2006) 2106-2115
40. Rong M.Z., Zhang M.Q., Pan S.L., and Friedrich K. Interfacial effects in polypropylene-silica nanocomposites. J Appl Polym Sci 92 3 (2004) 1771-1781
41. Jesionowski T., Bula K., Janiszewski J., and Jurga J. The influence of filler modification on its aggregation and dispersion behaviour in silica/PBT composite. Comp Interface 10 2-3 (2003) 225-242
42. Reddy C.S., Das C.K., and Narkis M. Propylene-ethylene copolymer nanocomposites: epoxy resin grafted nanosilica as a reinforcing filler. Polym Comp 26 6 (2005) 806-812
43. Parent J.S., Liskova A., and Resendes R. Isobutylene-based ionomer composites: siliceous filler reinforcement. Polymer 45 24 (2004) 8091-8096
44. Gaztelumendi M., Mondragon I., and Nazabal J. Effect of processing parameters on the physical-properties of Hytrel. Plast Rub Proc Appl 9 3 (1988) 167-172
45. Gaztelumendi M., Mondragon I., and Nazabal J. The physical state of polycarbonate Hytrel blends. Makromol Chem-M Symp 20-1 (1988) 269-275
46. Gaztelumendi M., and Nazabal J. Phase-behavior and miscibility limits in PC/Hytrel blends. J Polym Sci Pol Phys 33 4 (1995) 603-610
47. Gaztelumendi M., and Nazabal J. Morphology and mechanical properties of blends of polycarbonate and segmented copolyetherester. Polym Eng Sci 40 2 (2000) 430-440
48. Gaztelumendi M., and Nazabal J. Phenoxy/Hytrel blends. I. Miscibility and melt-state reactions. J Appl Polym Sci 70 1 (1998) 185-193
49. Gaztelumendi M., and Nazabal J. Phenoxy/Hytrel blends. II. Dynamic and tensile properties of unreacted miscible blends. J Appl Polym Sci 72 1 (1999) 85-93
50. Arrighi V., McEwen I.J., Qian H., and Prieto M.B.S. The glass transition and interfacial layer in styrene-butadiene rubber containing silica nanofiller. Polymer 44 20 (2003) 6259-6266
51. Tsagaropoulos G., and Eisenberg A. Dynamic-mechanical study of the factors affecting the 2 glass-transition behavior of filled polymers - similarities and differences with random ionomers. Macromolecules 28 18 (1995) 6067-6077
52. Fragiadakis D., Pissis P., and Bokobza L. Glass transition and molecular dynamics in poly(dimethylsiloxane)/silica nanocomposites. Polymer 46 16 (2005) 6001-6008
53. Reynaud E., Jouen T., Gauthier C., Vigier G., and Varlet J. Nanofillers in polymeric matrix: a study on silica reinforced PA6. Polymer 42 21 (2001) 8759-8768
54. Wu D.Z., Wang X.D., Song Y.Z., and Jin R.G. Nanocomposites of poly(vinyl chloride) and nanometric calcium carbonate particles: effects of chlorinated polyethylene on mechanical properties, morphology, and rheology. J Appl Polym Sci 92 4 (2004) 2714-2723
55. Sumita M., Shizuma T., Miyasaka K., and Ishikawa K. Effect of reducible properties of temperature, rate of strain, and filler content on the tensile yield stress of nylon 6 composites filled with ultrafine particles. J Macromol Sci-Phys B22 4 (1983) 601-618
56. Laredo E., Grimau M., Muller A., Bello A., and Suarez N. Influence of aging and crystallinity on the molecular motions in bisphenol-A polycarbonate. J Polym Sci Pol Phys 34 17 (1996) 2863-2879
57. Nielsen L.E. Dynamic mechanical-properties of polymers filled with agglomerated particles. J Polym Sci Pol Phys 17 11 (1979) 1897-1901
58. Osman M.A., and Atallah A. Effect of the particle size on the viscoelastic properties of filled polyethylene. Polymer 47 7 (2006) 2357-2368
59. Litvinov V.M., and Spiess H.W. H-1 and H-2 NMR-study of chain motion at the poly(dimethylsiloxane)-filler interface. Makromol Chem-M Symp 44 (1991) 33-36
60. Arrighi V., Higgins J.S., Burgess A.H., and Floudas G. Local dynamics of poly(dimethyl siloxane) in the presence of reinforcing filler particles. Polymer 39 25 (1998) 6369-6376
61. Nielsen L.E., and Landel R.F. Mechanical properties of polymers and composites. 2nd ed. (1994), Marcel Dekker, New York
62. Vassileva E., and Friedrich K. Epoxy/alumina nanoparticle composites. I. Dynamic mechanical behavior. J Appl Polym Sci 89 14 (2003) 3774-3785
63. Technical information about Hytrel: http://plastics.dupont.com.
64. Sumita M., Tsukihi H., Miyasaka K., and Ishikawa K. Dynamic mechanical-properties of polypropylene composites filled with ultrafine particles. J Appl Polym Sci 29 5 (1984) 1523-1530