메뉴 건너뛰기




Volumn 263, Issue 7-12 SPEC. ISS., 2007, Pages 1212-1219

Friction and wear studies on brake-pad materials based on newly developed resin

Author keywords

Binder for friction materials; Fade and recovery studies; Friction materials; NAO brake pad materials

Indexed keywords

BINDERS; BRAKES; FRICTION; FRICTION MATERIALS; PHENOLIC RESINS; POLYMERIZATION;

EID: 34548044484     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2006.12.050     Document Type: Article
Times cited : (138)

References (24)
  • 1
    • 0031162349 scopus 로고    scopus 로고
    • Composites as friction materials: recent developments in non-asbestos fiber reinforced friction materials-a review
    • Bijwe J. Composites as friction materials: recent developments in non-asbestos fiber reinforced friction materials-a review. Polym. Comp. 18 3 (1997) 378-396
    • (1997) Polym. Comp. , vol.18 , Issue.3 , pp. 378-396
    • Bijwe, J.1
  • 2
    • 34548038130 scopus 로고    scopus 로고
    • P.J. Blau, Compositions, Functions, and Testing of Friction Brake Materials and their Additives, ORNL/TM-2001/64, September 2001.
  • 4
    • 0037351676 scopus 로고    scopus 로고
    • A golden section approach to optimization of automotive friction materials
    • Lu Y. A golden section approach to optimization of automotive friction materials. J. Mater. Sci. 38 5 (2003) 1081-1085
    • (2003) J. Mater. Sci. , vol.38 , Issue.5 , pp. 1081-1085
    • Lu, Y.1
  • 5
    • 0036809154 scopus 로고    scopus 로고
    • A combinatorial approach for automotive friction materials: combined effects of ingredients on friction performance
    • Lu Y. A combinatorial approach for automotive friction materials: combined effects of ingredients on friction performance. Polym. Comp. 23 5 (2002) 814-817
    • (2002) Polym. Comp. , vol.23 , Issue.5 , pp. 814-817
    • Lu, Y.1
  • 6
    • 0036076148 scopus 로고    scopus 로고
    • Modelling wear traces of automotive friction materials by cantor set
    • Lu Y., Wright M.A., and Policandriotes T. Modelling wear traces of automotive friction materials by cantor set. Tribol. Trans. 45 2 (2002) 258-262
    • (2002) Tribol. Trans. , vol.45 , Issue.2 , pp. 258-262
    • Lu, Y.1    Wright, M.A.2    Policandriotes, T.3
  • 7
    • 0346707442 scopus 로고    scopus 로고
    • Combinatorial screening of ingredients for steel wool based semimetallic and Aramid pulp based non-asbestos organic brake materials
    • Choong-Fong T., and Lu Y. Combinatorial screening of ingredients for steel wool based semimetallic and Aramid pulp based non-asbestos organic brake materials. J. Reinf. Plast. Comp. 23 1 (2004) 51-63
    • (2004) J. Reinf. Plast. Comp. , vol.23 , Issue.1 , pp. 51-63
    • Choong-Fong, T.1    Lu, Y.2
  • 8
    • 29644435931 scopus 로고    scopus 로고
    • A combinatorial approach for automotive friction materials: effects of ingredients on friction performance
    • Lu Y. A combinatorial approach for automotive friction materials: effects of ingredients on friction performance. Comp. Sci. Technol. 66 (2006) 591-598
    • (2006) Comp. Sci. Technol. , vol.66 , pp. 591-598
    • Lu, Y.1
  • 9
    • 13744253555 scopus 로고
    • Friction properties of a phenolic resin filled with Fe and graphite-sensitivity to load, speed and temperature
    • Rhee S.K. Friction properties of a phenolic resin filled with Fe and graphite-sensitivity to load, speed and temperature. Wear 28 (1974) 277-281
    • (1974) Wear , vol.28 , pp. 277-281
    • Rhee, S.K.1
  • 10
    • 0041508324 scopus 로고    scopus 로고
    • Effects of water films and sliding speed on the frictional behavior of truck disc brake materials
    • Blau P.J., and Mclaughlin J.C. Effects of water films and sliding speed on the frictional behavior of truck disc brake materials. Tribol. Int. 36 (2003) 709-715
    • (2003) Tribol. Int. , vol.36 , pp. 709-715
    • Blau, P.J.1    Mclaughlin, J.C.2
  • 12
    • 0028698030 scopus 로고
    • A fundamental tribochemical study of the third body layer formed during automotive friction braking
    • Wirth A., Eggleston D., and Whitaker R. A fundamental tribochemical study of the third body layer formed during automotive friction braking. Wear 179 (1994) 75-81
    • (1994) Wear , vol.179 , pp. 75-81
    • Wirth, A.1    Eggleston, D.2    Whitaker, R.3
  • 14
    • 0030293913 scopus 로고    scopus 로고
    • Surface effect on braking behavior of PAN-pitch carbon-carbon composite
    • Lee J.K., Lin J.H.C., and Ju C.P. Surface effect on braking behavior of PAN-pitch carbon-carbon composite. Wear 199 (1996) 228-236
    • (1996) Wear , vol.199 , pp. 228-236
    • Lee, J.K.1    Lin, J.H.C.2    Ju, C.P.3
  • 15
    • 3242719768 scopus 로고    scopus 로고
    • Performance of friction materials based on variation in nature of organic fibres. Part I. Fade and recovery behaviour
    • Satapathy B.K., and Bijwe J. Performance of friction materials based on variation in nature of organic fibres. Part I. Fade and recovery behaviour. Wear 257 5-6 Suppl. 1-2 (2004) 573-584
    • (2004) Wear , vol.257 , Issue.5-6 SUPPL. 1-2 , pp. 573-584
    • Satapathy, B.K.1    Bijwe, J.2
  • 16
    • 18844451587 scopus 로고    scopus 로고
    • Fade and recovery behavior of non-asbestos organic (NAO) composite friction materials based on combinations of rock fibers and organic fibers
    • Satapathy B.K., and Bijwe J. Fade and recovery behavior of non-asbestos organic (NAO) composite friction materials based on combinations of rock fibers and organic fibers. J. Reinf. Plast. Comp. 24 6 (2005) 563-577
    • (2005) J. Reinf. Plast. Comp. , vol.24 , Issue.6 , pp. 563-577
    • Satapathy, B.K.1    Bijwe, J.2
  • 17
    • 34548040909 scopus 로고    scopus 로고
    • B.K. Satapathy, Performance evaluation of non-asbestos fibre reinforced organic friction materials, Ph.D. Thesis, Indian Institute of Technology, Delhi, 2002.
  • 18
    • 19944373879 scopus 로고
    • Frictional and wear properties of asbestos short fibre filled phosphorylated CNSL (cashew nut shell liquid) polymers for automobile brake lining applications
    • Bera S.C., Pillai C.K.S., Rangan P.N., Arankale A.R., and Chirmade J.H. Frictional and wear properties of asbestos short fibre filled phosphorylated CNSL (cashew nut shell liquid) polymers for automobile brake lining applications. Ind. J. Technol. 27 (1989) 393-397
    • (1989) Ind. J. Technol. , vol.27 , pp. 393-397
    • Bera, S.C.1    Pillai, C.K.S.2    Rangan, P.N.3    Arankale, A.R.4    Chirmade, J.H.5
  • 19
    • 0034228812 scopus 로고    scopus 로고
    • Friction and wear of friction materials containing two different phenolic resins reinforced with Aramid pulp
    • Kim S.J., and Jang H. Friction and wear of friction materials containing two different phenolic resins reinforced with Aramid pulp. Tribol. Int. 33 (2000) 477-484
    • (2000) Tribol. Int. , vol.33 , pp. 477-484
    • Kim, S.J.1    Jang, H.2
  • 20
    • 19944366641 scopus 로고    scopus 로고
    • Influence of modified phenolic resins on the fade and recovery behavior of friction materials
    • Bijwe J., Nidhi N., Majumdar B.K., and Satapathy. Influence of modified phenolic resins on the fade and recovery behavior of friction materials. Wear 259 (2005) 1068-1078
    • (2005) Wear , vol.259 , pp. 1068-1078
    • Bijwe, J.1    Nidhi, N.2    Majumdar, B.K.3    Satapathy4
  • 21
    • 34548026039 scopus 로고    scopus 로고
    • Patent filing in progress.
  • 22
    • 0035331426 scopus 로고    scopus 로고
    • Wear and contact conditions of brake pads: dynamical in situ studies of pad on glass
    • Eriksson M., Lord J., and Jacobson S. Wear and contact conditions of brake pads: dynamical in situ studies of pad on glass. Wear 249 (2001) 272-278
    • (2001) Wear , vol.249 , pp. 272-278
    • Eriksson, M.1    Lord, J.2    Jacobson, S.3
  • 23
    • 34548008597 scopus 로고    scopus 로고
    • G. Nicholson, Facts about Friction, P&W Price Enterprises, Inc., Crydon, PA, 1995.
  • 24
    • 0037431478 scopus 로고    scopus 로고
    • Optimization of manufacturing parameters for a brake lining using Taguchi method
    • Kim S.J., Kim K.S., and Jang H. Optimization of manufacturing parameters for a brake lining using Taguchi method. J. Mater. Proc. Technol. 136 (2003) 202-208
    • (2003) J. Mater. Proc. Technol. , vol.136 , pp. 202-208
    • Kim, S.J.1    Kim, K.S.2    Jang, H.3


* 이 정보는 Elsevier사의 SCOPUS DB에서 KISTI가 분석하여 추출한 것입니다.