Friction in a coated surface deformed by a sliding sphere

Wear

Volumn 263, Issue 7-12 SPEC. ISS., 2007, Pages 1315-1323

  Ronkainen, Helena ^a   Laukkanen, Anssi ^a   Holmberg, Kenneth ^a  

^a VTT TECHNICAL RESEARCH CENTRE OF FINLAND   (Finland)

Author keywords

Adhesive; DLC; FEM modelling; Friction; Ploughing; TiN

Indexed keywords

ADHESIVES; CRACK INITIATION; CRACK PROPAGATION; FINITE ELEMENT METHOD; FORMABILITY; FRICTION; STRAIN; STRESS ANALYSIS; TRIBOLOGY;

FRICTION MEASUREMENTS; NUMERICAL CONTACT ANALYSIS; PLOUGHING FRICTION;

COATED MATERIALS;

ADHESIVES; COATED MATERIALS; CRACK INITIATION; CRACK PROPAGATION; FINITE ELEMENT METHOD; FORMABILITY; FRICTION; STRAIN; STRESS ANALYSIS; TRIBOLOGY;

EID: 34548008638     PISSN: 00431648     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.wear.2007.01.103     Document Type: Article

References (38)

1. Martin J.M., Donnet C., Le Mogne T., and Epicier T. Superlubricity of molybdenum disulphide. Phys. Rev. B 48 14 (1993) 10583-10586
2. 2: crystal orientation mechanisms. Surf. Coat. Technol. 68/69 (1994) 427-432
3. 2 physical vapor deposition. J. Vac. Sci. Technol. A12 4 (1994) 1998-2004
4. A. Erdemir, O. Erilmaz, G. Fenske, Synthesis of diamond-like carbon films with superlow friction and wear properties, 46th Int. Symp. Am. Vac. Soc., 25-29 Oct. 1999. Seattle, USA. (ID#1625, Conf.Paper #TF+VM-MoA3) p. 14.
5. Erdemir A. Friction and wear of diamond and diamond-like carbon films. Proc. Inst. Mech. Eng., Part J: Eng. Tribololgy 216 (2002) 387-400
6. Holmberg K., and Matthews A. Coatings tribology-properties, techniques and applications in surface engineering. Elsevier Tribology Series 28 (1994), Elsevier Science B.V, The Netherlands p. 442
7. Holmberg K., and Matthews A. Tribological properties of metallic and ceramic coatings. In: Bhushan B. (Ed). Modern Tribology Handbook (2001), CRC Press, New York 827-870
8. Holmberg K., Matthews A., and Ronkainen H. Coatings tribology-contact mechanisms and surface design. Tribology Int. 31 Nos. 1-3 (1998) 107-120
9. Donnet C. Problem-solving methods in tribology with surface-specific techniques. In: Riviére J.C., and Myhra S. (Eds). Handbook of Surface and Interface Analysis (1998), Marcel Dekker, Basel 697-745 Chapter 16
10. Hogmark S., Jacobson S., and Larsson M. Design and evaluation of tribological coatings. Wear 246 (2000) 20-33
11. In: Singer I.L., and Pollock H.M. (Eds). Fundamental of Friction: Macroscopic and Microscopic Processes (1992), Kluwer Academic Publisher, The Netherlands 621
12. In: Bhushan B. (Ed). Handbook of Micro/Nanotribology. second ed. (1999), CRC Press, USA 850
13. Pharr G.M. Measurement of mechanical properties by ultra-low load indentation. Mater. Sci. Eng. A253 (1998) 151-159
14. Holmberg K. The basic material parameters that control friction and wear of coated surfaces under sliding. Tribologia - Finnish J. Tribology 19 3 (2000) 3-18
15. Komvopoulos K., Saka N., and Suh N.P. The role of hard layers in lubricated and dry sliding. J. Tribology 109 (1987) 223-231
16. Kral E.R., and Komvopoulos K. Three-dimensional finite element analysis of surface deformation and stresses in an elastic-plastic layered medium subjected to indentation and sliding contact loading. J. Appl. Mech. 63 (1996) 365-375
17. Ye N., and Komvopoulos K. Effect of residual stress in surface layer on contact deformation of elastic-plastic layered media. Trans. ASME 125 (2003) 692-699
18. Kral E.R., and Komvopoulos K. Three-dimensional finite element analysis of subsurface stresses and shakedown due to repeated sliding on a layered medium. J. Appl. Mech. 63 (1996) 967-973
19. Kral E.R., and Komvopoulos K. Three-dimensional finite element analysis of subsurface stress and strain fields due to sliding contact on an elastic-plastic layered medium. Trans. ASME 119 (1997) 332-341
20. Xiaoyu J., Lauke B., and Schueller T. Frictional contact analysis of scratch test for elastic and elastic-plastic thin-coating/substrate materials. Thin Solid Films 414 (2002) 63-71
21. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., and Varjus S. A model for stresses, crack generation and fracture toughness calculation in scratched TiN-coated steel surfaces. Wear 254 (2003) 278-291
22. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S., and Koskinen J. Tribological contact analysis of a ball sliding on a flat coated surface, Part I. Modelling stresses and strains. Surf. Coat. Technol. 200 (2006) 3793-3809
23. Holmberg K., Laukkanen A., Ronkainen H., Wallin K., Varjus S., and Koskinen J. Tribological contact analysis of a ball sliding on a flat coated surface, Part II: Material deformations, influence of coating thickness and Young's modulus. Surf. Coat. Technol. 200 (2006) 3810-3823
24. Laukkanen A., Holmberg K., Koskinen J., Ronkainen H., Wallin K., and Varjus S. Tribological contact analysis of a ball sliding on a flat coated surface. Part III. Fracture toughness calculation and influence of residual stresses. Surf. Coat. Technol. 200 (2006) 3824-3944
25. Ye N., and Komvopoulos K. Three-dimensional finite element analysis of elastic-plastic layered media under thermomechanical surface loading. Trans. ASME 125 (2003) 52-59
26. Li J., and Beres W. Three-dimensional finite element modelling of the scratch test in a TiN coated titanium alloy substrate. Wear (2006) 1232-1242
27. Valli J. A review of adhesion test methods for thin hard coatings. J. Vac. Sci. Technol. A4 No 6 (1986) 3007-3014
28. Bull S.J., and Berasetegui E.G. An overview of the potential of quantitative coating adhesion measurement by scratch testing. Tribology Int. 39 (2006) 99-114
29. Valli J., Mäkelä U., Matthews A., and Murawa V. TiN coating adhesion studies using the scratch test method. J. Vac. Sci. Techol. A3 No. 6 (1985) 2411-2414
30. Huang L., Lu J., and Xu K. Elasto-plastic deformation and fracture mechanism of a diamond-like carbon film deposited on a Ti-6Al-4V substrate in nano-scratch test. Thin Solid Films 466 (2004) 175-182
31. Erdemir A., Eryilmaz O.L., Nilufer I.B., and Fenske G.R. Synthesis of superlow-friction carbon films from highly hydrogenated methane plasmas. Surf. Coat. Technol. 133-134 (2000) 448-454
32. Ronkainen H., Varjus S., Koskinen J., and Holmberg K. Differentiating of tribological performance of hydrogenated and hydrogen-free DLC coatings. Wear 249 (2001) 260-266
33. Bowden F.P., and Tabor D. The Friction and Lubrication of Solids (1986), Oxford University Press, Oxford, UK p. 374
34. Bull S.J. Can scratch testing be used as a model for the abrasive wear of hard coatings?. Wear 233-235 (1999) 412-423
35. Malzbender J., and de With G. Sliding indentation, friction and fracture of a hybrid coating on glass. Wear 236 (1999) 355-359
36. Komvopoulos K. Sliding friction mechanisms of boundary-lubricated layered surfaces. Part II. Theoretical analysis. Tribology Trans. 34 No. 2 (1991) 281-291
37. von Stebut J., Rezakhanlou R., Anouh K., Michel H., and Gantois M. Major damage mechanisms during scratch and wear testing on hard substrates. Thin Solid Films 181 (1989) 555-564
38. H. Ronkainen, K. Holmberg, A. Laukkanen, Coated surface design by modelling and simulation, Presentation in MIICS2006, the 3rd Mikkeli International Industrial Coating Seminar. http://www.miics.net/, p. 13.