Recent developments in polymer-derived ceramic fibers (PDCFs): Preparation, properties and applications - A review

Soft Materials

Volumn 4, Issue 2-4, 2006, Pages 249-286

  Miele, P ^a,b,c   Bernard, S ^a   Cornu, D ^a   Toury, B ^a  

^a UNIVERSITÉ CLAUDE BERNARD LYON 1   (France)

^b INSTITUT UNIVERSITAIRE DE FRANCE   (France)

^c UNIVERSITÉ DE LYON   (France)

Author keywords

BN; Non oxide ceramic fibers; Polymer derived ceramics; Preceramic polymers; SiBCN

Indexed keywords

FIBER CURABILITY; NON-OXIDE CERAMIC FIBERS; POLYMER-DERIVED CERAMICS; PRECERAMIC POLYMERS;

AMORPHOUS MATERIALS; BORON NITRIDE; CROSSLINKING; FUNCTIONAL GROUPS; MELT SPINNING; PYROLYSIS; THERMODYNAMIC STABILITY;

CERAMIC FIBERS;

EID: 34547730247     PISSN: 1539445X     EISSN: 15394468     Source Type: Journal    
DOI: 10.1080/15394450701310228     Document Type: Review

References (106)

1. Strife, J.R., Brennan, J.J., and Prewo, K.M. (1990) Ceram,. Eng. Sci. Proc., 11: 871.
2. Schneider, H., Naslain, R., and Krenkel, W. (2006) High Temperature Ceramic Matrix Composites; John Wiley and Sons Inc.
3. Baldus, H.P., Jansen, M., and Sporn, D. (1999) Science, 285: 699.
4. Bunsell, A.R. and Berger, M.-H. (1999) Fine Ceramic Fibres; Dekker, M. (ed.); Inc.: New York.
5. Peuckert, M., Vaahs, T., and Brück, M. (1990) Adv. Mater., 2: 398.
6. Bill, J. and Aldinger, F. (1995) Adv. Mater., 7: 775.
7. Greil, P. (2002) Adv. Mater., 14: 709.
8. Anger, F.W. and Herbert, J.M. (1960) The Preparation of Phosphorus-Nitrogen Compounds as Nonporous Solids; Special Ceramics. Popper, P. (ed.); Academic Press: New York.
9. Chantrell, P.G. and Popper, P. Inorganic Polymers for Ceramics; Special Ceramics; Popper, P. (ed.); Academic Press: New York.
10. Seyferth, D. and Mignani, G.J. (1988) Mater. Sci. Let., 7: 487.
11. Fazen, P.J., Beck, J.S., Lynch, A.T., Remsen, E.E., and Sneddon, L.G. (1990) Chem. Mater., 2: 96.
12. Choong Kwet Yive, N.S., Corriu, R.J. P., Leclercq, D., Mutin, P.H., and Vioux, A. (1992) Chem. Mater., 4: 141.
13. Baixia, L., Yinkui, L., and Yi, L. (1993) J. Mater. Chem., 3: 117.
14. Hapke, J. and Ziegler, G. (1995) Adv. Mater., 7: 380.
15. Narula, C.K. and Allard, L.F. (1998) J. Mater. Chem., 8: 1881.
16. Corriu, R.J. P., Gerbier, P., Giuerin, C., and Henner, B. (2000) Chem. Mater., 12: 805.
17. Nakashima, H., Koyama, S., Kuroda, K., and Sugahara, Y. (2002) J. Am. Ceram. Soc., 85: 59.
18. Cheng, F., Archibald, S.J., Clark, S.,Toury, B., Kelly, S.M., and Bradley, J.S. (2003) Chem. Mater., 15:4651.
19. Engering, J. and Jansen, M.Z. (2003) Anorg. Allg. Chem., 629: 913.
20. Lichtenberger, O., Pippel, E., Woltersdorf, J., and Riedel, R. (2003) Mater. Chem. Phys., 81: 195.
21. Puerta, AR., Remsen, E.E., Bradley, M.G., Sherwood, W., and Sneddon, L.G. (2003) Chem. Mater., 15: 478.
22. Berger, F., Weinmann, M., Aldinger, M., and Müller, K. (2004) Chem. Mater., 16: 919.
23. Zheng, Z., Li, Y., Luo, Y., Su, S., Zhang, Z., Yang, S., Gao, W., and Xie, Z. (2004) J. Appl. Polym. Sci., 92: 2733.
24. Müller, A., Cierstel, P., Butchereit, E., Nickel, K.G., and Adinger, F. (2004) J. Eur. Ceram. Soc., 24: 3409.
25. Bianconi, P.A., Joray, S.J., Adrich, B.L., Sumranjit, J., Duffy, DJ., Long, D.P., Lazorcik, J.L., Raboin, L., Kearns, J.K., Smulligan, SX., and Babyak, J.M. (2004) J. Am. Chem. Soc., 126: 3191.
26. Häussler, M., Sun, Q., Xu, K., Lam, J.W. Y., Dong, H., and Tang, B.Z. (2005) J. Inorg. Organomet. Polym. Mater., 15: 67.
27. Cheng, F., Kelly, S.M., Clark, S., Young, N.A., Archibald, S.J., and Bradley, J.S. (2005) Chem. Mater., 17: 5594.
28. Cheng, F., Kelly, S.M., Lefebvre, F., Clark, S., Supplit, R., and Bradley, J.S. (2005) J. Mater. Chem., 15: 772.
29. Sardar, K., Dan, M., Schwenzer, B., and Rao, C.N. R. (2005) J. Mater. Chem., 15: 2175.
30. Seyferth, D. and Czubarow, P. (1994) Chem. Mater., 6: 10.
31. Colombo, P., Sglavo, V., Pippel, E., and Woltersdorf, J. (1998) J. Mater. Sci., 33: 2405.
32. Weinmann, M., Haug, R., Bill, J., De Guire, M., and Aldinger, F. (1998) Appl. Organomet. Chem., 12: 725.
33. Jones, R., Szweda, A., and Petrak, D. (1999) Composites: Part A, 30: 569.
34. Liew, L.-A., Zhang, W., Bright, V.M., An, L., Dunn, M.L., and Raj, R. (2001) Sensor Actual A, 89: 64.
35. Amoros, P., Beltran, D., Guillem, C., and Latorre (2002) J. Chem. Mater., 14: 1585.
36. Cromme, P., Scheffler, M., and Gireil, P. (2002) Adv. Engineer. Mater., 4: 873.
37. Toury, B., Miele, P., Cornu, D., Vincent, H., and Bouix (2002) J. Adv. Funct. Mater., 12: 228.
38. Colombo, P. and Bernardo, E. (2003) Compos Sci. Technol., 63: 2353.
39. Cheng, Q.-M., Interrante, L.V., Lienhard, M., Shen, Q., and Wu, Z. (2005) J. Eur. Ceram. Soc., 25: 233.
40. Herzog, A., Thünemann, M., Vogt, U., and Beffort, O. (2005) J. Eur. Ceram. Soc., 25: 187.
41. Dibandjo, P., Bois, L., Chassagneux, F., Cornu, D., Letoffe, J.-M., Toury, B., Babonneau, F., and Miele, P. (2005) Adv. Mater., 17: 571.
42. Pham, T.A., Kim, D.-P., Lim, T.-W., Park, S.-H., Yang, D.-Y., and Lee, K.-S. (2006) Adv. Funct. Mater., 16: 1235.
43. Winter, G., Verbeek, W., and Mansmann, M. U.S. Patent 3,892,583, 1975.
44. Yajima, S., Shishido, T., and Kayano, H. (1978) Nature, 273: 525.
45. LeGrow, G.E., Lim, T.F., Lipowitz, J., and Reaoch, R.S. (1987) Am. Ceram. Soc. Bull., 66: 363.
46. Okamura, K. (.1987) Composites, 18: 107.
47. Lipowitz, J. (1991) Ceram. Bull., 70: 1888.
48. Murphy, V.S.R. (.1993) Bull. Mater. Sci., 16: 87.
49. Baker, R.T., Bolt, J.D., Reddy, G.S., Roe, D.C., Staley, R.H., Tebbe, F.N., and Vega, A.J. (1988) Mater. Res. Soc. Symp. Proc., 121;
50. Better Ceram. Chem 3: 471 pp.
51. Lipowitz, J. (1997) Fiber Synthesis Processes; Carbide, Nitride and Boride Materials Synthesis and Processing; Weimer, A.W. (ed.); Chapman & Hall: London, 433 pp.
52. Zhang, Z.-F., Scotto, C.S., and Laine, R.M. (1998) J. Mater. Chem., 8: 2715.
53. Motz, G., Hacker, J., Ziegler, G., Clauss, B., and Schawaller, D. (2003) Low-Cost-Ceramic SiCN Fibers by an Optimized Polycarbosilazane and Continuous Processing; Inorganic Structural Fiber Composites; Vincenzini, P. and Badini, C. (eds.); Techna Srl: Faenza, Italy, 47 pp.
54. Bernard, S., Weinmann, M., Gerstel, P., Miele, P., and Aldinger, F. (2005) J. Mater. Chem., 5: 289.
55. Bernard, S., Chassagneux, F., Berthet, M.-P., Cornu, D., and Miele, P. (2005) J. Am. Ceram. Soc., 88: 1607.
56. Paine, R.T. and Narula, C.K. (1990) Chem. Rev., 90: 73.
57. Haubner, R., Wilhelm, M., Weissenbacher, R., and Lux, B. (2002) High Performance Non-oxide Ceramic II; Jansen, M. (ed.);
58. Structure Bonding. Springer-Verlag: Berlin Heidelberg, 102, 1 pp.
59. Huang, J. and Zhu, Y.T. (2000) Defects and Diffusion Forum, 186: 1.
60. Paine, R.T. and Sneddon, L.G. (1994) Chemtech, 24: 29.
61. Takamizawa, M., Kobayashi, T., Hayashida, A., and Takeda, Y. (1986) US Patent 4 604 367.
62. Funayama, O., Kato, T., Tashiro, Y., and Isoda, T.J. (1.993) Am. Ceram. Soc., 76: 717.
63. Su, K., Remsen, E.E., Zank, G.A., and Sneddon, L.G. (1993) Chem. Mater., 547: 5.
64. Baldus, H.-P., Passing, G., Sporn, D., and Thierauf, A. (1995) Ceram. Trans., 58: 75.
65. Riedel, R., Kienzle, A., Dressler, W., Ruwisch, L., Bill, J., and Adinger, F. (1996) Nature, 382: 796.
66. Srivastava, D., Duesler, E.N., and Paine, R.T. (1998) Eur. J. Inorg. Chem., 855.
67. Schmidt, W.R., Narsavage-Heald, D.M., Jones, D.M., Marchetti, P.S., Raker, D., and Maciel, G.E. (1999) Chem. Mater., 11: 1455.
68. Weinmann, M., Schuhmacher, J., Kummer, H., Prinz, S., Peng, J., Seifert, H.J., Christ, M., Müller, K., Bill, J., and Adinger, F. (2000) Chem.. Mater., 12: 623.
69. Haberecht, J., Krumeich, F., Grützmacher, H., and Nesper, R. (2004) Chem. Mater., 16: 418.
70. Nghiem, Q.-D. and Kim, D.-P. (2005) J. Mater. Chem., 15: 2188.
71. Lee, J., Butt, D.P., Baney, R.H., Bowers, C.R., and Tulenko, J.S. (2005) J. Non-Cryst. Solids, 351: 2995.
72. Jäschke, T. and Jansen, M. (2006) J. Mater. Chem., 16: 2792.
73. Fazen, P.J., Remsen, E.E., and Sneddon, L.G. (1991) Polym. Preprints, 32: 544.
74. Fazen, P.J., Remsen, EVE., Caroll, P.J., Beck, J.S., and Sneddon, L.G. (1995) Chem. Mater., 7: 1942.
75. (a) Wideman, T. and Sneddon, L.G. (1996) Chem. Mater., 8: 3;
76. (b) Wideman, T., Remsen, E.E., Cortez, E., Chlanda, V.L., and Sneddon, L.G. (1998) Chem. Mater., 10: 412.
77. Lindquist, DA, Janik, J.F., Datye, A.K., and Paine, R.T. (1992) Chem.. Mater., 4: 17.
78. Paciorek, K.J. L., Kratzer, R.H., Harris, D.H., and Krone-Schmidt, W. (1987) US Patent 4707556.
79. Tanigushi, L., Harada, K., and Maeda, T. (1976) Chem. Abstr., 85: 96582v.
80. Kimura, Y., Kubo, Y., and Hayashi, N. (1994) Compos. Sci. Technol., 51: 173.
81. Toury, B., Bernard, S., Cornu, D., Chassagneux, F., Létoffé , J.-M., and Miele, P.J. (2003) Mater. Chem., 13: 274.
82. Duperrier, S., Gervais, C., Bernard, S., Cornu, D., Babonneau, F., Balan, C., and Miele, P. (2007) Maeromolecules, to be published.
83. Duperrier, S., Gervais, C., Bernard, S., Cornu, D., Babonneau, F., and Miele, P.J. (2006) Mater. Chem., 16: 3127.
84. Bernard, S., Fiaty, K., Cornu, D., Miele, P., and Laurent, P. (2006) J. Phys. Chem. B, 110: 9048.
85. Bernard, S., Fiaty, K., Cornu, D., and Miele, P. (2006) Adv. Sci. and Tech.; (Faenza, Italy), 45: 726.
86. Duperrier, S., Bernard, S., Câlin, A., Chiriac, R., Sigala, C., Miele, P., and Balan, C. (2007) Macromolecules, to be published.
87. Jander, W.Z. (.1927) Anorg. Allg. Chem., 163: 1.
88. Bernard, S., Ayadi, K., Létoffé, J.-M., Chassagneux, F., Berthet, M.-P., Cornu, D., and Miele, P. (2004) J. Sol. State Chem., 177: 1803.
89. Johnson, S.M., Brittain, R.D., Lamoreaux, R.H., and Rowcliffe, DJ. (1988) J. Am. Ceram. Soc., 71: C-132.
90. Mah, T., Hecht, N.L., McCullum, D.E., Hoenigman, J.R., Kin, H.M., Katz, A.P., and Lipsitt, H.A. (1984) J. Mater. Sci., 19: 1191.
91. Schawaller, D. and Clauss, B. (2001) Preparation of Non-Oxide Ceramic Fibers in the System Si-C-N and Si-B-C-N, in High Temperature Ceramic Matrix Composites; Krenkel, W., Naslain, R. and Schneider, H. (eds.); Wiley-VCH: Weinheim, 56 pp.
92. Su, K., Remsen, E.E., Zank, G.A., and Sneddon, L.G. (1993) Chem. Mater., 5: 547.
93. Wideman, T., Su, K., Remsen, E.E., Zank, G.A., and Sneddon, L.G. (1995) Chem. Mater., 7: 2203.
94. Wüllen, L.V. and Jansen, M. (2001) J. Mater. Chem., 11: 223.
95. Weisbarth, R. and Jansen, M. (2003) J. Mater. Chem., 13: 2975.
96. Jäschke, T. and Jansen, M. (2004) C. R. Chimie, 7: 471.
97. Jäschke, T. and Jansen, M. (2005) J. Eur. Ceram. Soc., 25: 211.
98. Haberecht, J., Nesper, R., and Grützmacher, H. (2005) Chem. Mater., 17: 2340.
99. Müller, A., Zern, A., Gerstel, P., Bill, J., and Aldinger, F. (2002) J. Eur. Ceram. Soc., 22: 1631.
100. (a) Wideman, T., Cortez, E., Remsen, E.E., Zank, C.A., Carroll, P.J., and Sneddon, L.G. (1997) Chem. Mater., 9: 22.8;
101. (b) Wideman, T., Fazen, P.J., Su, K., Remsen, E.E., Zank, G.A., and Sneddon, L.G. (1998) Appl. Organomet. Chem., 12: 681.
102. Cimibulk, M.K. and Parthasarathy, T.A. (2001) J. Am. Ceram. Soc., 84: 2197.
103. Bernard, S., Weinmann, M., Cornu, D., Miele, P., and Aldinger, F. (2005) J. Eur. Ceram. Soc., 25: 251.
104. Bernard, S., Duperrier, S., Cornu, D., Miele, P., Weinmann, M., Balan, C., and Adinger, F. (2006) J. Optoelectron. Adv. M., 8: 648.
105. Bernard, S., Weinmann, M., Cornu, D., Miele, P., and Aldinger, F. (2005) Mechanical Properties and Performance of Engineering Ceramics and Composites: A Collection of Papers Presented at the 29th International Conference on Advanced Ceramics and Composites; , Lara-Curzio, E., Zhu, D. and Kriven, W.M. (eds.); USA, 23-28, Vol. 26, 26, 35-42 pp.
106. Bernard, S., Weinmann, M., Cornu, D., Miele, P., and Aldinger, F. (2006) Advances in Science and Technology; (Faenza, Italy), 50: 9.