A physically motivated anisotropic tensorial representation of damage with separate functions for void nucleation, growth, and coalescence

International Journal of Plasticity

Volumn 23, Issue 10-11, 2007, Pages 1641-1678

  Hammi, Y ^a   Horstemeyer, M F ^a  

^a MISSISSIPPI STATE UNIVERSITY   (United States)

Author keywords

Anisotropic damage; Constitutive modeling; Elasto viscoplasticity; Finite element; Stress integration; Void coalescence; Void growth; Void nucleation

Indexed keywords

COALESCENCE; DAMAGE DETECTION; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; NUCLEATION; STRESS ANALYSIS;

ANISOTROPIC DAMAGE; CONSTITUTIVE MODELING; ELASTO-VISCOPLASTICITY; STRESS INTEGRATION; VOID COALESCENCE; VOID GROWTH; VOID NUCLEATION;

VISCOPLASTICITY;

EID: 34547702193     PISSN: 07496419     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijplas.2007.03.010     Document Type: Article

References (100)

1. Abaqus. "Theory Manual", Version 5.8, Hibbit (1998), Karson & Sorensen, Inc
2. Abu Al-Rub R.Z., and Voyiadjis G.Z. On the coupling of anisotropic damage and plasticity models for ductile materials. International Journal of Solids and Structures 40 (2003) 2611-2643
3. Achon, P., 1994, Comportement et tenacité d'alliages d'aluminium à haute résistance. Ph.D Thesis, Ecole Nationale Supérieure de Paris, France.
4. Bammann D.J. Modeling temperature and strain rate dependent large deformations of metals. Applied Mechanics Review 1 (1990) 312-318
5. Bammann D.J., Chiesa M.L., Horstemeyer M.F., and Weingarten L.I. Failure in ductile materials using finite element methods. In: Jones N., and Wierzbicki T. (Eds). Structural Crashworthiness and Failure (1993), Elsevier Applied Science, London and New York 1-54
6. Bammann D.J., and Dawson P.R. Effects of spatial gradients in hardening evolution upon localization. In: Khan A.S. (Ed). Physics and Mechanics of Finite Plastic and Viscoplastic Deformation, Proc. Plasticity 97 (1993), Neat Press, Fulton, Maryland
7. Bammann, D.J., Mosher, D., Hughes, D.A., Moody, N.R., Dawson, P.R., 1993. Using spatial gradients to model localization phenomena, Sandia National Reports SAND99-8588.
8. Bazant Z.P. Why continuum damage is nonlocal: justification by quasiperiodic microcrack array. Mechanics Research Communications 14 5-6 (1987) 407-419
9. Becker R. The effect of porosity distribution on ductile failure. Journal of the Mechanics and Physics of Solids 35 (1987) 577-599
10. Benzerga A., Besson J., and Pineau A. Anisotropic ductile fracture: Part I: Experiments. Acta Materiala 52 (2004) 4623-4638
11. Benzerga A., Besson J., and Pineau A. Anisotropic ductile fracture: Part II: Theory. Acta Materiala 52 (2004) 4639-4650
12. Bonora N., Gentile D., and Pirondi A. Identification of the parameters of a non-linear continuum damage mechanics model for ductile failure in metals. Journal of Strain Analysis for Engineering Design 39 6 (2004) 639-651
13. Bonora N., Gentile D., Pirondi A., and Newaz G. Ductile damage evolution under triaxial state of stress: theory and experiments. International Journal of Plasticity 21 5 (2005) 981-1007
14. Brocks W., Sun D.Z., and Hönig A. Verification of the transferability of micromechanical parameters by cell model calculations with visco-plastic materials. International Journal of Plasticity 11 1 (1995) 971-989
15. Brunig M. An anisotropic ductile damage model based on irreversible thermodynamics. International Journal of Plasticity 19 10 (2003) 1679-1713
16. Brunig M., and Ricci S. Nonlocal continuum theory of anisotropically damaged metals. International Journal of Plasticity 21 7 (2005) 1346-1382
17. Chaboche J.-L. Continuous damage mechanics - A tool to describe phenomena before crack initiation. Nuclear Engineering and Design 64 (1981) 233-247
18. Chaboche J.-L., Mayas N.E., and Paulmier P. Modélisation thermodynamique des phénomènes de viscoplasticité, restauration et vieillissement. C. R. Academy of Science Paris, série II t.320 (1995) 9-16
19. Chaboche, J.-L., 1997. Mécanique non linéaire des matériaux: Comportement, Endommagement et méthodes numériques. Cours de l'IPSI, Besson J., Cailletaud G., Chaboche J.-L. et Forest S. (Chapitres 5 et 6).
20. Chaboche J.-L. Thermodynamically founded CDM models for creep and others conditions. In: Altenbach H., and Skrzypek J.J. (Eds). Creep and Damage in Materials and Structures. CISM Courses and Lecture No. 399, International Centre for Mechanical Sciences (1999), Springer, Wien and New York 209-283
21. Chow C.L., and Wang J. An anisotropic theory of continuum damage mechanics for ductile fracture. Engineering and Fracture Mechanics 27 (1987) 547-558
22. Chow C.L., and Lu T.J. On evolution laws of anisotropic damage. Engineering and Fracture Mechanics 34 (1989) 679-701
23. Chow C.L., and Wei Y. A model of continuum damage mechanics for fatigue failure. International Journal of Fracture 50 (1991) 301-316
24. Chow C.L., and Lu T.J. A comparative study of continuum damage models for crack propagation under gross yielding. International Journal of Fracture 35 (1992) 43-75
25. Chow C.L., and Yang X.J. A Generalized Mixed Isotropic-Kinematic Hardening Plastic Model Coupled with Anisotropic Damage for Sheet Metal Forming. International Journal of Damage Mechanics 13 (2004) 81-101
26. Clayton J.D., and McDowell D.L. A homogenized finite elastoplasticity and damage: theory and computations. Mechanics of Materials 36 (2004) 799-824
27. Cocks A.C.F. Inelastic deformation of porous materials. Journal of Mechanics and Physics Solids 37 (1989) 693-715
28. Cordebois, J.-P., Sidoroff, F., 1979. Damage induced elastic anisotropy. Euromech 115, Villard de Lens.
29. Cordebois J.P., and Sidoroff F. Endommagement anisotrope en élasticité et plasticité. Journal of Mécanique Théorique Appliquée (1982) 45-60 Numéro spécial
30. Cox T.B., and Low J.R. An investigation of the plastic fracture of AISI 4340 and 18 Nickel-200 grade maraging steels. Metallurgical Transactions A 5 (1974) 1457-1470
31. Dafalias Y.F. Corotational rates for kinematic hardening at large plastic deformations. Journal of Applied Mechnanics 50 (1983)
32. D'Escatha Y., and Devaux J.C. Numerical study of initiation, stable crack growth and maximum load with a ductile fracture criterion bases on the growth of holes. In: Landes J.D., Begley J.A., and Clarke G.A. (Eds). Elastic-Plastic Fracture (1979), American Society for Testing and Materials, Philadelphia 229-248 ASTM STP 668
33. Doraivelu S.M., Gegel H.L., Gunasekera J.S., Thomas J.F., and Morgan T. A new yield function for compressible P/M materials. International Journal of Mechanical Science 26 (1984) 527-535
34. Gangalee A., and Gurland J. On the fracture of silicon particles in aluminium-silicon alloys. Transactions of the Metallurgical Society of AIME 239 (1967) 269-272
35. Garrison W.M., and Moody N.R. Ductile fracture. Journal of Physics and Chemistry of Solids 48 11 (1987) 1035-1074
36. Garrison A.M., Manish M.D., and Horstemeyer M.F. Effect of temperature on sillicon particle damage in A356 alloy. Metallurgical and Material Transactions A 29 (1998) 905-907
37. Goods S.H., and Brown L.M. The nucleation of cavities by plastic deformation. Acta Metallurgica 27 (1979) 1-15
38. Gray, G.T., Vecchio, K.S., Lopez, M.F., 2000. Microstructural anisotropy on the quasi-static and dynamic fracture of 1080 eutectoid steel. In: Explomet Conference, Albuquerque, NM, June 19-22, 2000.
39. Green G., and Knott J.F. The initiation and propagation of ductile fracture in low strength steels. Journal of Engineering Materials and Techniques, ASME, Fairfield, NJ 98 (1976) 37-46
40. Gurson, A.L., 1975. Plastic flow and fracture behavior of ductile materials incorporing void nucleation, growth and interaction. Ph.D Thesis, Brown University.
41. Gurson A.L. Continuum theory of ductile rupture by void nucleation and growth: Part I - Yield criteria and flow rules for porous ductile media. Journal of Engineering Materials and Techniques 99 (1977)
42. Hancock J.W., and Mackenzie A.C. On the mechanisms of ductile failure in high-strength steels subjected to multi-axial stress-states. Journal of the Mechanics and Physics of Solids 14 (1977) 147-169
43. Hansen N.R., and Schreyer H.L. A thermodynamically consistent framework for theories of elastoplasticity coupled with damage. International Journal of Solids and Structures 31 (1994) 359-389
44. Hartmann S., and Haupt P. Stress computaion and consistent tangent operator using non-linear kineamtic hardening models. International Journal of Numerical Methods Engineering 36 (1993) 3801-3814
45. Horstemeyer M.F., and Gokhale A.M. A void-crack nucleation model for ductile material. International Journal of Solids and Structures 36 (1999) 5029-5055
46. Horstemeyer M.F., and Ramaswamy S. On factors affecting localisation and void growth in ductile metals: a parametric study. International Journal of Damage Mechanics 9 (2000) 5-28
47. Horstemeyer M.F., Lathrop J., Gokhale A.M., and Dighe M. Modeling stress state dependent damage evolution in a cast Al-Si-Mg aluminium alloy. Theoritical and Applied Fracture Mechanics 33 (2000) 31-47
48. Horstemeyer M.F., Matalanis M.M., Sieber A.M., and Botos M.L. Micromechanical finite element calculations of temperature and void configuration effects on void growth and coalescence. International Journal of Plasticity 16 (2000) 979-1015
49. Ju J.W. Isotropic and anisotropic damage variables in continuum damage mechanics. Journal of Engineering Mechanics 116 12 (1990) 2764-2770
50. Kachanov L.M. Time of rupture process under creep conditions. T.V.Z. Akad. Nauk. S.S.R. Otd. Tech. Nauk. 8 (1958) 26-31
51. Kachanov L.M. Introduction to Continuum Damage Mechanics (1986), Netherlands Martinus Nijhoff Publishers, Dordrecht
52. Koh S.K., and Stephens R.I. Fracture toughness of A356-T6 cast aluminium. SAE-SP760, Fatigue and Fracture Toughness of A356-T6 Cast Aluminium Alloy 881705 (1988) 61-69
53. Koplik J., and Needleman A. Void growth and coalescence in porous plastic solids. International Journal of Solids and Structures 24 (1988) 835-853
54. Krajcinovic D. Constitutive equations for damaging materials. Journal of Applied Mechanics 50 (1983) 355-360
55. Leblond J.B., and Perrin G. A self-consistent approach to coalescence of cavities in inhomogeneously voided ductile solides. European Journal of Mechanics A - Solids 14 4 (1999) 499-527
56. Leblond J.B., Perrin G., and Devaux J. An improved Gurson-type model for hardenable ductile metals. European Journal of Mechanics A - Solids 14 4 (1995) 499-527
57. Lee E.H. Elastic-plastic deformation at finite strains. Journal of Applied Physics 36 (1969) 1-6
58. Lemaitre J., and Chaboche J.-L. Mécanique des Matériaux Solides (1985), Dunod
59. Lemaitre J., Desmorat R., and Sauzay M. Anisotropic damage law of evolution. European Journal of Mechanics A - Solids 19 2 (2000) 187-208
60. Lubarda V.A., and Krajcinovic K. Damage tensors and the crack density distribution. International Journal of Solids and Structures 30 20 (1993) 2859-2877
61. Mandel, J., 1971. Plasticité Classique et Viscoplasticité. C.I.S.M. Courses, Udine, Italy.
62. Marini B., Mudry F., and Pineau A. Experimental study of cavity growth in ductile rupture. Engineering Fracture Mechanics 6 (1985) 989-996
63. Marin, E.B., 1993. A critical study of finite strain porous inelasticity. Ph.D Thesis, Georgia Institute of Technology.
64. Marin E.B., and McDowell D.L. Associative versus non-associative porous viscoplasticity based on internal state variables concepts. International Journal of Plasticity 12 5 (1996) 989-996
65. McClintock F.A. A criterion for ductile fracture by the growth of holes. Journal of Fracture 4 (1968) 103-130
66. Menzel A., Ekh M., Runesson K., and Steinmann P. A framework for multiplicative elastoplasticity with kinematic hardening coupled to anisotropic damage. International Journal of Plasticity 21 3 (2005) 397-434
67. Miller, M.P., McDowell, D.L., 1992. Stress state dependence of finite strain inelasticity, microstructural characterization in constitutive modeling of metals and granular media, ASME Summer Applied Mechanics Meeting, Tuscon, AZ, ASME AMD-vol. 32, pp. 27-44.
68. Murakami S. Notion of continuum damage mechanics and its application to anysotropic creep damage theory. Journal of Engineering Materials and Technology 105 (1983) 99-105
69. Murakami S. Mechanical modeling of material damage. Journal of Applied Mechanics 55 (1988) 280-286
70. Nagtegaal J.C. On the implementation of inelastic constitutive equations with special reference to large deformation problems. Computational Methods in Applied Engineering 33 (1982) 469-484
71. Onat E.T., and Leckie F.A. Representation of mechanical behavior in the presence of changing internal structure. Engineering Fracture Mechanics 55 (1988) 1-10
72. Ortiz M. A constitutive theory for the inelastic behavior of concrete. Mechanics Materials 4 (1985) 67-93
73. Ortiz M., and Popov E.P. Accuracy and stability of integration algorithms for elastoplastic constitutive relations. International Journal of Numerical Methods in Engineering 21 (1985) 1561-1576
74. Oyane M., Shima S., and Kono Y. Theory of plasticity for porous metals. Bulletin of the JSME 16 (1973) 1254-1262
75. Pardoen T., Doghri I., and Delannay F. Experimental and numerical comparaison of void growth models and void coalescence criteria for the prediction of ductile fracture in copper bars. Acta Materiala 46 (1998) 541-552
76. Pardoen T., and Hutchinson J.W. An extended model for void growth and coalescence. Journal of the Mechanics and Physics of Solids 48 (2000) 2467-2512
77. Pijaudier-Cabot G. Non-local damage. In: Mühlhaus H.B. (Ed). Continuum Models for Materials with Microstructure (1995), Wiley, New York 105-143
78. Qiu Y.P., and Weng G.J. An energy approach to the plasticity of porous materials. In: Ju J.W. (Ed). Recent Advances in Damage Mechanics and Plasticity vol. 30 (1992), ASME AMD 203-217
79. Ramaswamy S., and Aravas N. Finite element implementation of gradient plasticity model - Part I. Gradient-dependent yield functions. Computational Methods in Applied Mechanical Engineering 163 (1998) 11-32
80. Rice J.R., and Tracey D.M. On the ductile enlargement of voids in triaxial stress fields. Journal of the Mechanics and Physics of Solids 17 (1998) 201-217
81. Rice, J.R., Johnson, M.A., 1970. The role of the large crack tip geometry changes in plane strain fracture. In: Kanninen, M.F., Adler, W.G., Rosenfield, A.R., Jaffee, R.J. (Eds). McGraw-Hill, New York, pp. 641-672.
82. Rogers H.C. The tensile fracture of ductile metals. Transactions of the Metallurgical Society of AIME 218 (1960) 498-506
83. Saanouni, K., 1988. Sur l'analyse de la fissuration des milieux élasto-viscoplastiques par la théorie de l'endommagement continu. Thèse de Doctorat, Université de Technologie de Compiègne.
84. Saanouni K., Forster C., and Hatira F.B. On the anelastic flow with damage. Journal of Damage Mechanics 3 (1994) 140-169
85. Sidoroff F. The geometrical concept of intermediate configuration and elastic-plastic finite strain. Archives in Mechanics 25 2 (1973) 299-308
86. Simo J.C., and Taylor R.L. Consistent tangent operators for rate-independent elasto-plasticity. Computational Methods in Applied Mechanical Engineering 48 (1985) 101-118
87. Siruguet, K., 2000. Rupture ductile á basse triaxialité: effet des inclusion sur la croissance et la coalescence des cavités. Thèse de Doctorat, Université Paris VI.
88. Stumvoll M., and Swoboda G. Deformation behavior of ductile solids containing anisotropic damage. Journal of Engineering Mechanics 119 7 (1993) 1331-1352
89. Svedberg T., and Runesson K. A thermodynamically consistent theory of gradient-regularized plasticity coupled to damage. International Journal of Plasticity 13 6-7 (1997) 669-696
90. Thomason P.F. Ductile Fracture of Metals (1990), Pergamon Press, Oxford
91. Tikhomirov D., Niekamp R., and Stein E. On three-dimensional microcrack density distribution. Zeitschrift fur Angewandte Mathematik und Mechanik 81 (2001) 3-16
92. Tirosh J., Shirizly A., and Rubinski L. Evolution of anisotropy in the compliances of porous materials during plastic stretching or rolling - analysis and experiments. Mechanics of Materials 31 (1999) 449-460
93. Tvergaard V. Influence of voids on shear band instabilities under plane stress conditions. International Journal of Fracture 17 (1981) 389-407
94. Tvergaard V. Material failure by void coalescence in localised shear bands. International Journal of Solids and Structures 32 (1982) 659-672
95. Tvergaard V. Material failure by void growth and coalescence. Advances in Applied Mechanics 27 (1990) 83-151
96. Tvergaard V., and Niordson C. Nonlocal plasticity effects on interaction of different size voids. International Journal of Plasticity 20 1 (2004) 107-120
97. Tvergaard V., and Needleman C. Three dimensional microstructural effects on plane strain ductile crack growth. International Journal of Solids and Structures 43 (2006) 6165-6179
98. Voyiadjis G.Z., and Kattan P.I. Advances in Damage Mechanics: Metals and Metal Matrix Composites (1999), Elsevier Editions
99. Voyiadjis G.Z., Abu Al-Rub R.K., and Palazotto A.N. Thermodynamic framework for coupling of non-local viscoplasticity and non-local anisotropic viscodamage for dynamic localization problems using gradient theory. International Journal of Plasticity 20 6 (2004) 981-1038
100. Voyiadjis, G.Z., Kattan, P.I., 2006. Evolution of fabric tensors in damage mechanics of solids with micro-cracks: Part I - Theory and fundamental concepts. Mechanics Research Communications (in press).