Modeling of contact dryers

Drying Technology

Volumn 25, Issue 7-8, 2007, Pages 1377-1391

  Tsotsas, E ^a   Kwapinska, M ^a   Saage, G ^a  

^a OTTO VON GUERICKE UNIVERSITY   (Germany)

Author keywords

Agitated bed; Contact drying; Discrete element method; Penetration model

Indexed keywords

DRYING; FINITE DIFFERENCE METHOD; GRANULATION; INDUSTRIAL HEATING; MATHEMATICAL MODELS; STATISTICS;

CONTACT DRYING; PENETRATION MODEL; ROTARY DRUM;

DRYERS (EQUIPMENT);

DRYERS (EQUIPMENT); DRYING; FINITE DIFFERENCE METHOD; GRANULATION; INDUSTRIAL HEATING; MATHEMATICAL MODELS; STATISTICS;

EID: 34547674761     PISSN: 07373937     EISSN: 15322300     Source Type: Journal    
DOI: 10.1080/07373930701439079     Document Type: Article

References (45)

1. Tsotsas, E. Industrial convective drying: A unit operation on the way to process systems and product engineering. Proceedings of the European Drying Symposium (EU Drying 03) Crete/Greecepp. 15-27.
2. Schlünder, E.U. and Mollekopf, N. (1984) Vacuum contact drying of free flowing, mechanically agitated particulate material. Chemical Engineering Processing, 18, pp. 93-111.
3. Malhotra, K. and Okazaki, M. (1992) Advances in Drying, 5, Hemisphere
4. Kemp, I. (1999) Progress in dryer selection techniques. Drying Technology, 17, pp. 1667-1680.
5. Menshutina, N.V. and Kudra, T. (2001) Computer aided drying technologies. Drying Technology, 19, pp. 1825-1850.
6. Kohout, M., Collier, A.P. and Stepanek, F. (2006) Mathematical modeling of solvent drying from a static particle bed. Chemical Engineering Science, 61, pp. 3674-3685.
7. Liapis, A.I., Pikal, M.J. and Brutini, R. (1996) Research and development needs and opportunities in freeze drying. Drying Technology, 16, pp. 1265-1300.
8. Hottot, A., Peczalski, R., Vessot, S. and Andrieu, J. (2006) Freeze-drying of pharmaceutical proteins in vials: Modelling of freezing and sublimation steps. Drying Technology, 24, pp. 561-570.
9. Schlünder, E.U. and Tsotsas, E. (1988) Wärmeübertragung in Festbetten, durchmischten Schüttgütern und Wirbelschichten, Thieme, Stuttgart
10. Tsotsas, E. and Martin, H. (1991) Heat transfer between a wall and gas-solid dispersed systems. International Chemical Engineering, 31, pp. 629-641.
11. Tsotsas, E. (2000)Begell House, New York
12. Tsotsas, E. (2002)Springer, Berlin
13. Tsotsas, E. (2002) Wärmeleitfähigkeit von Schüttschichten. Wärmeatlas,, Springer, Berlin
14. Kwapinski, W. and Tsotsas, E. (2006) Characterization of particulate materials in respect to drying. Drying Technology, 24, pp. 1083-1092.
15. Pikal, M.J., Chang, L. and Tang, X. (1984) Evaluation of glassy-state dynamics from the width of the glass transition: Results from theoretical simulation of differential scanning calorimetry and comparisons with experiment. Journal of Pharmaceutical Sciences, 93, pp. 981-994.
16. Mellmann, J. (2001) The transverse motion of solids in rotating cylinders: Forms of motion and transition behaviour. Powder Technology, 118, pp. 251-270.
17. Mollekopf, N. (1983) Wärmeübertragung an mechanisch durchmischtes Schüttgut mit Wärmesenken in Kontaktapparaten, University of Karlsruhe
18. Yang, R.Y., Zou, R.P. and You, A.B. (2003) Microdynamic analysis of particle flow in a horizontal drum. Powder Technology, 130, pp. 138-146.
19. Finnie, G.J., Kruyt, N.P., Ye, M., Zeilstra, C. and Kuipers, J.A.M. (2005) Longitudinal and transverse mixing in rotary kilns: A discrete element method approach. Chemical Engineering Science, 60, pp. 4083-4091.
20. Vargas, W.L. and McCarthy, J.J. (2001) Heat conduction in granular materials. AIChE Journal, 47, pp. 1052-1059.
21. Kaneko, Y., Shiojima, T. and Horio, M. (1999) DEM simulation of fluidized beds for gas-phase olefin polymerization. Chemical Engineering Science, 54, pp. 5809-5821.
22. Li, J., Campbell, G.M. and Mujumdar, A.S. (2003) A numerical study of heat transfer mechanisms in gas-solids flows through pipes using a coupled CFD and DEM model. Drying Technology, 21, pp. 1839-1866.
23. Swasdisevi, T., Tanthapanichakoon, W., Charinpanitkul, T., Kawaguchi, T., Tanaka, T. and Tsuji, Y. (2005) Prediction of gas-particle dynamic and heat transfer in two-dimensional spouted bed. Advanced Powder Technology, 16, pp. 275-293.
24. Saage, G., Kwapinska, M. and Tsotsas, E. An analysis of mixing in rotary drums by means of discrete element method and penetration model. Proceedings of 5th Powders and Grains Conference Stuttgartpp. 837-840.
25. Kwapinska, M., Saage, G. and Tsotsas, E. On the way from penetration models to discrete element simulations of contact dryers. Proceedings of XI Polish Drying Symposium Poznan
26. Kwapinska, M., Saage, G. and Tsotsas, E. (2006) Mixing of particles in rotary drums: A comparison of discrete element simulations with experimental results and penetration models for thermal processes. Powder Technology, 161, pp. 69-78.
27. Kwapinska, M., Saage, G., Peglow, M. and Tsotsas, E. Discrete modelling of contact heating of particles in rotating drum. Proceedings of 5th World Congress of Particle Technology Orlandopp. 23-27.
28. Kwapinska, M., Saage, G. and Tsotsas, E. (2007) Continuous versus discrete modelling of heat transfer to agitated beds. Powder Technology
29. Cundall, P.A. and Strack, O.D.L. (1979) A discrete numerical model for granular assemblies. Geotechnique, 29, pp. 47-65.
30. Renzo, A.D. and Maio, F.P.D. (2004) Comparison of contact-force models for the simulation of collisions in DEM-based granular flow codes. Chemical Engineering Science, 59, pp. 524-541.
31. Wunschmann, J. (1974) Wärmeübertragung von beheizten Flächen an bewegte Schüttungen bei Normaldruck und im Vakuum, University of Karlsruhe
32. Schlünder, E.U. (1984) Heat transfer to packed and stirred beds from the surface of immersed bodies. Chemical Engineering and Processing, 18, pp. 31-53.
33. Bridgewater, J. (1975) Fundamental powder mixing mechanics. Powder Technology, 15, pp. 215-236.
34. Malhotra, K., Mujumdar, A.S., Imakoma, H. and Okazaki, M. (1988) Fundamental particle mixing studies in an agitated bed of granular materials in a cylindrical vessel. Powder Technology, 55, pp. 107-114.
35. Malhotra, K. and Mujumdar, A.S. (1990) Particle mixing and solids flowability in granular beds stirred by paddle-type blades. Powder Technology, 61, pp. 155-164.
36. van Puyfelde, D.R., Young, B.R. and Wilson, M.A. (2001) Comparison of transverse mixing kinetics data obtained from a rolling drum. Powder Technology, 114, pp. 264-265.
37. Muchowski, E. (1977) Der Wärmeübergang vom Boden vibrierter Gefässe an Kugelschüttungen bei Atmosphärendruck und im Vakuum, University of Karlsruhe
38. Schlünder, E.U. (1980) Der Wärmeübergang an ruhende, bewegte und durchwirbelte Schüttschichten. VT-Verfahrenstechnik, 14, pp. 459-468.
39. Tsotsas, E. and Schlünder, E.U. (1986) Vacuum contact drying of free flowing mechanically agitated multigranular packings. Chemical Engineering Processing, 20, pp. 339-349.
40. Tsotsas, E. and Schlünder, E.U. (1987) Vacuum contact drying of mechanically agitated beds: The influence of hygroscopic behaviour on the drying rate curve. Chemical Engineering and Processing, 21, pp. 199-208.
41. Dittler, A., Bamberger, T., Gehrmann, D. and Schlünder, E.U. (1997) Measurement and simulation of the vacuum contact drying of pastes in a LIST-type kneader drier. Chemical Engineering and Processing, 36, pp. 301-308.
42. Tsotsas, E. and Schlünder, E.U. (1986) Contact drying of mechanically agitated particulate material in the presence of inert gas. Chemical Engineering and Processing, 20, pp. 277-285.
43. Gevaudan, A. and Andrieu, J. (1991) Contact drying modeling of agitated porous media beads. Chemical Engineering and Processing, 30, pp. 31-37.
44. Arlabosse, P. Measurement and simulation of contact drying of municipal sewage sludge in a batch agitated dryer. Proceedings of AFSIA/EFCE Drying Conference Paris pp. 86-87.
45. Tsotsas, E. (1986) Über der Einfluß der Dispersität und der Hygroskopizität bei der Vakuum-Kontakttrocknung rieselfähiger Trocknungsgüter, University of Karlsruhe