Modeling of fretting wear under gross slip and partial slip conditions

Journal of Tribology

Volumn 129, Issue 3, 2007, Pages 528-535

  Gallego, L ^a   Nélias, Daniel ^a  

^a UNIVERSITÉ DE LYON   (France)

Author keywords

Fretting; Fretting wear; Stick slip; Wear simulation

Indexed keywords

COMPUTATIONAL GEOMETRY; COMPUTER SIMULATION; MATHEMATICAL MODELS; WEAR OF MATERIALS; WEAR RESISTANCE;

FRETTING WEAR; FRICTION LOGS; SURFACE WEAR; WEAR RATE;

TRIBOLOGY;

COMPUTATIONAL GEOMETRY; COMPUTER SIMULATION; MATHEMATICAL MODELS; TRIBOLOGY; WEAR OF MATERIALS; WEAR RESISTANCE;

EID: 34547540253     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2736436     Document Type: Article

References (31)

1. Mindlin, R. D., 1949, "Compliance of Elastic Bodies in Contact," ASME J. Appl. Mech., 16, pp. 259-268.
2. Zhou, Z. R., and Vincent, L., 1995, "Mixed Fretting Regimes," Wear, 181-183, pp. 531-536.
3. Vincent, L., Berthier, Y., and Godet, M., 1992, "Testing Methods in Fretting Fatigue: A Critical Appraisal," ASTM Spec. Tech. Publ., 1159, pp. 33-48.
4. Gallego, L., Nélias, D., and Jacq, C., 2006, "A Comprehensive Method to Predict Wear and to Define the Optimum Geometry of Fretting Surfaces," ASME J. Tribol., 128, pp. 476-485.
5. Mohrbacher, H., Blanpain, B., Celis, J. P., Roos, J. R., Stals, L., and Van Stappen, M., 1995, "Oxidational Wear of TiN Coatings on Tool Steel and Nitrided Tool Steel in Unlubricated Fretting," Wear, 188, pp. 130-137.
6. Fouvry, S., Kapsa, P., and Vincent, L., 1996, "Quantification of Fretting Damage," Wear, 200, pp. 186-205.
7. Fridrici, V., Fouvry, S., and Kapsa, P., 2003, "Fretting Wear Behavior of a Cu-Ni-In Plasma Coating," Surf. Coat. Technol., 163-164, pp. 429-434.
8. Fouvry, S., Duó, P., and Perruchaut, R., 2004, "A Quantitative Approach of Ti-6Al-4V Fretting Damage: Friction, Wear and Crack Nucleation," Wear, 257, pp. 916-929.
9. Paulin, C., Fouvry, S., and Deyber, S., 2005, "Wear Kinetics of Ti-6Al-4V under Constant and Variable Fretting Sliding Conditions," Wear, 259, pp. 292-299.
10. Endommagement du Contact Multicouche Aube/Disque Sous Chargement de Fretting: Impact des Sollicitations Variables et de la Dimension du Contact," Ph.D. thesis, Ecole Centrale de Lyon, France.
11. McColl, I. R., Ding, J., and Leen, S. B., 2004, "Finite Element Simulation and Experimental Validation of Fretting Wear," Wear, 256, pp. 1114-1127.
12. Ding, J., Leen, S. B., and McColl, I. R., 2004, "The Effect of Slip Regime on Fretting Wear-Induced Stress Evolution," Int. J. Fatigue, 26, pp. 521-531.
13. Kapsa, P., and Cartier, M., 2001, "Usure des Contacts Mécaniques. Manifestations de l'usure," Techniques de l'ingénieur. Génie mécanique, BD1(BM5067), pp. 1-14.
14. Archard, J. F., 1953, "Contact and Rubbing of Flat Surfaces," J. Appl. Phys., 24, pp. 981-988.
15. Godet, M., 1984, "The Third Body Approach, a Mechanical Point of View of Wear," Wear, 100, pp. 437-452.
16. Berthier, Y., Vincent, L., and Godet, M., 1988, "Velocity Accommodation in Fretting," Wear, 125, pp. 25-38.
17. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, London, U.K.
18. Love, A. E. H., 1927, A Treatise on the Mathematical Theory of Elasticity, 4th ed., Cambridge University Press, Cambridge, U.K.
19. Kalker, J. J., 1990, Three Dimensional Elastic Bodies in Rolling Contact, Kluwer Academic, Dordrecht, The Netherlands.
20. Kalker, J. J., 1977, "Variational Principles of Contact Elastostatics," J. Inst. Math. Appl., 20, pp. 199-219.
21. Johnson, K. L., 1955, "Surface Interaction between Elastically Loaded Bodies under Tangential Forces," Proc. R. Soc. London, Set. A, 320, pp. 531-548.
22. Polonsky, I. A., and Keer, L. M., 1999, "A Numerical Method for Solving Rough Contact Problems Based on the Multi-Level Multi-Summation and Conjugate Gradient Techniques," Wear, 231, pp. 206-219.
23. Liu, S., Wang, Q., and Liu, G., 2000, "A Versatile Method of Discrete Convolution and FFT (DC-FFT) for Contact Analyses," Wear, 243, pp. 101-111.
24. Tian, X., and Bhushan, B., 2001, "A Numerical Three-Dimensional Model for the Contact of Rough Surfaces by Variational Principle," ASME J. Tribol., 123, pp. 330-342.
25. Xiaolan, A., and Krich, S., 1999, "Solving Elastic Contact Between Rough Surfaces as an Unconstrained Strain Energy Minimization by Using CGM and FFT Techniques," ASME J. Tribol., 121, pp. 639-647.
26. Allwood, J., 2005, "Survey and Performance Assessment of Solution Methods for Elastic Rough Contact Problems," ASME J. Tribol., 127, pp. 10-23.
27. Boucly, V., Nélias, D., and Liu, S. B., 2005, "Contact Analyses for Bodies with Frictional Heating and Plastic Behavior," ASME J. Tribol., 127, pp. 355-364.
28. Nélias, D., Boucly, V, and Brunet, M., 2006, "Elastic-Plastic Contact between Rough Surfaces: Proposal for a Wear or Running-in Model," ASME J. Tribol., 128, pp. 236-244.
29. Antaluca, E., Nélias, D., and Cretu, S., 2004, "A Three-Dimensional Friction Model for Elastic-Plastic Contact with Tangential Loading - Application to Dented Surfaces," Proceedings of 2004 ASME/STLE International Joint Tribology Conference, ASME, New York, Paper No. TRIB2004-64331.
30. Boucly, V., Nélias, D., and Green, I., 2007, "Modeling of Rolling and Sliding Contact Between Two Asperities," ASME J. Tribol., 129, pp. 235-245.
31. Fouvry, S., Kapsa, P., and Vincent, L., 1995, "Analysis of Sliding Behaviour for Fretting Loadings: Determination of Transition Criteria," Wear, 185, pp. 35-46.