Handling uncertainty propagation in laminated composites through multiscale modeling of progressive failure

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn 3, Issue , 2007, Pages 2578-2595

  Khire, Ritesh ^a,b   Hajela, Prabhat ^a,b,c   Bahei El Din, Yehia A ^a,b  

^a RENSSELAER POLYTECHNIC INSTITUTE   (United States)

^b United Automobile Aerospace and Agricultural Implement Workers of America   (United States)

^c AIAA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL COSTS; LAMINATE LEVELS; MECHANISTIC MODELS; TRANSFORMATION FIELD ANALYSIS (TFA);

COMPUTER SIMULATION; EIGENVALUES AND EIGENFUNCTIONS; FAILURE ANALYSIS; LAMINATED COMPOSITES; STRESSES;

UNCERTAINTY ANALYSIS;

EID: 34547520669     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (38)

1. M. Toya, 1974, "A Crack Along the Interface of a Circular Inclusion Embedded in an Infinite Solid," J. Mech. Phys. Solids, Vol. 22, pp. 325-348.
2. IB.L. Karihaloo and K. Vistivanathan, 1985, "Elastic Field of a Partially Debonded Elliptical Inhomogeneity With Debonding Over an Arc (Antiplane Strain)," J. Appl. Mech., Vol. 52, pp. 91-97.
3. T. Mura and R. Furuhashi, 1984, "The Elastic Inclusion with a Sliding Interface." J. Appl. Mech., Vol. 51, pp. 308-310.
4. T.Mura, I. Jasiuk and B. Tsuchida, 1985, The Stress Field of a Sliding Inclusion," Int. J. Solids Structures, Vol. 21, p. 1165.
5. S.S. Steif and A. Dollar, 1988, "Longitudinal Shearing of a Weakly Bonded Fiber Composite," J. Appl. Mech., Vol. 55. pp. 618-623.
6. R. Furuhashi, J.H. Huang and T. Mura, 1992, "Sliding Inclusions and Inhomogeneities with Frictional Interfaces," J. Appl. Mech., Vol. 59, pp. 783-788.
7. J.W. Hutchinson and H.M. Jensen, 1990, "Models of Fiber Debonding and Pullout in Brittle Composites with Friction," Mechanics of Materials, Vol. 9, pp. 139-163.
8. G. J. Dvorak and J. Zhang, 2001, "Transformation field analysis of damage evolution in composite materials," J. Mechanics and Physics of Solids, 49, 2001, 2517-2541.
9. M. Sejnoha, 1996, "Micromechanical Modeling of Unidirectional Fibrous Composite Plies and Laminates," Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, New York.
10. M.V. Srinivas, 1997, "Micromechanical Modeling of Composite Plies and Laminates Ph.D. Thesis, Rensselaer Polytechnic Institute, Troy, New York.
11. L.N. McCartney, 1995, "New Theoretical Model of Stress Transfer between Fiber and Matrix in a Uniaxially Fiber Reinforced Composite, Proc. Royal Soc. London, A425, pp. 215-244, 1995.
12. J.M. Whitney and L.T. Drzal, 1988, "Axisymmetric Stress Distribution Around An Isolated Fiber Fragment, Toughened Composites,"ASTM STP 937, Philadelphia, 179-196, 1988.
13. J.A. Nairn, 1992, "A Variational Mechanics Analysis of Stresses Around Breaks in Embedded Fiber," Mech. Mater., 13, 131-154, 1992.
14. C.H. Hsueh, 1988, "Analytical Evaluation of Interfacila Shear Strength For Fiber Reinforced Ceramic Composites," J. Am Ceram. Soc., 71, 490-493, 1988.
15. M. S. Madhukar and L. T. Drzal, "Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties. II. Longitudinal (0 deg) and Transverse (90 deg) Tensile and Flexure Behavior of Graphite/Epoxy Composites", Journal of Composite Materials. Vol. 25, no. 8, pp. 958-991. Aug. 1991
16. S.W. Tsai and E.M. Wu. 1971, "A General Theory of Strength for Anisotropic Materials,' J. Comp. Mat., Vol. 5, pp. 58-80.
17. Z. Hashin, 1980, " Failure Criteria for Unidirectional Fiber Composites," J. Appl. Mech., Vol. 47, pp. 329-334.
18. T.V. Parry and A.S. Wronski, 1985, "Kinking and Compressive Failure in Uniaxially Aligned Carbon Fiber Composite Tested Under Superimposed Hydrostatic Pressure," J. Mat. Sci., Vol. 17, pp. 893-900.
19. R.M. Christensen, 1988, "Tensor Transformations and Failure Criteria for the Analysis of Fiber Composite Materials," J. Comp. Mat., Vol. 22, pp. 874-897.
20. R.M. Christensen, 1990, "A Critical Evaluation for a Class of Micromechanics Models," J. Mech. Phys. Solids, Vol. 38, pp. 379-404.
21. R.M. Christensen, 1996, "Stress Based Yield/Failure Criteria for Fiber Composites," Int. J. Solids Structures, Vol. 34, pp. 529-543.
22. W. W. Feng, 1991, "A Failure Criterion for Composite Materials," J. Comp. Mat., Vol. 25, pp. 88-100.
23. H.T. Hahn and M.N. Kallas, "Failure Criteria for Thick Composites," Ballistic Research Laboratory Report, BRL-CR-691, Aberdeen, MD.
24. L.J. Hart-Smith, 1993, "Should Fibrous Composite Failure Modes be Interacted or Superimposed," Vol. 24, pp. 53-55.
25. th Intl. Congress of Theoretical and Apllied Mechanics,) Kluver Academic Publishers, 2000, pp. 197-210.
26. Chamis, C.C. and Abumeri G.H., "Probabilistic Dynamic Buckling of Composite Shell Structures," Composites: Part A, Vol. 36, 2005, pp. 1368-1380.
27. Liu, Y. and Mahadevan, S., "Probabilistic Fatigue Life Prediction of Multidirectional Composite Laminates," Composite Structures, Vol. 69, 2005, pp. 11-19.
28. Abumeri G.H. and Chamis, C.C., "Non-Deterministic Optimization of Composite Structures Reliability," AIAA 2004-1896, 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics & Materials Conference, April 2004, Palm Springs, CA.
29. Soliman, H.E. and Kapania R.K., "Probability of Failure of Composite Cylinders Subjected to Axisymmetric Loading," AIAA Journal, Vol. 43, No. 6, 2005, pp. 1342-1348.
30. Arbocz, J. and Hilburger, M.W., "Toward a Probabilistic Preliminary Design Criterion for Buckling Critical Composite Shells," AIAA Journal, Vol. 43, No. 8, 2005, pp. 1823-1827
31. Dvorak, G.J. and Bahei-El-Din, Y.A., "Transformation Analysis of Inelastic Laminates," In: Pyrz, R. (Ed.), IUTAM Symposium on Microstructure-Property Interactions in Composite Materials. Kluwer Academic Publishers, Netherlands, 1995, pp. 89-100
32. Bahei-El-Din, Y.A., "Uniform Fields, Yielding, and Thermal Hardening in Fibrous Composite Laminates," Int. J. Plast., Vol. 8, 1992, pp. 867-892.
33. Hill, R., "Theory of Mechanical Properties of Fiber-Strengthened Materials: I. Elastic Behaviour," J. Mech. Phys. Solids, Vol. 12, 1964, pp. 199-212.
34. Hill, R., "Elastic Properties of Reinforced Solids: Some Theoretical Principles," J. Mech. Phys. Solids, Vol. 11, 1963, pp. 357-372.
35. Dvorak, G.J., "Plasticity Theories for Fibrous Composite Materials," In: Everett, R.K., Arsenault, R.J. (Eds.), Metal Matrix Composites, Mechanisms and Properties, Vol. 2. Academic Press, Boston, 1991, pp. 1-77.
36. S.W. Tsai and E.M. Wu. 1971, "A General Theory of Strength for Anisotropic Materials,' J. Comp. Mat., Vol. 5, pp. 58-80.
37. Bahei-El-Din, Y.A., Rajendran, A.M., and Zikry, M.A., "A Micromechanical Model for Damage Progression in Woven Composite Systems," Int. J. Solids Struct., Vol. 41, 2004, pp. 2307-2330.
38. Soden P.D.; Hinton M.J.; Kaddour A.S., "Biaxial test results for strength and deformation of a range of E-glass and carbon fibre reinforced composite laminates: failure exercise benchmark data", Composites Science and Technology, Vol. 62, No. 12, Sep. 2002, pp. 1489-1514.