A macroscopic finite element for a symmetric double lap joint subjected to mechanical and thermal loading

Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference

Volumn 7, Issue , 2007, Pages 7390-7410

  Gustafson, Peter A ^a,b   Waas, Anthony M ^a,b  

^a UNIVERSITY OF MICHIGAN   (United States)

^b AIAA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

COMPUTATIONAL METHODS; CONTINUUM MECHANICS; FINITE ELEMENT METHOD; STRESS ANALYSIS; STRUCTURAL LOADS; THERMAL LOAD;

MACROSCOPIC FINITE ELEMENT; MECHANICAL LOADING; SYMMETRIC DOUBLE LAP JOINTS; THERMO-MECHANICAL ANALYTICAL MODELS;

JOINTS (STRUCTURAL COMPONENTS);

EID: 34547515739     PISSN: 02734508     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2514/6.2007-2308     Document Type: Conference Paper

References (40)

1. Gustafson, P. A., Bizard, A., and Waas, A. M., "Dimensionless parameters in symmetric double lap joints: an orthotropic solution for thermomechanical loading," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 47th Structures, Structural Dynamics, and Materials Conference, May 1-4 2006, Newport RI, No. 2006-1959, American Institute of Aeronautics and Astronautics, 2006.
2. Gustafson, P. A., Bizard, A., and Waas, A. M., "Dimensionless parameters in symmetric double lap joints: An orthotropic solution for thermomechanical loading," International Journal of Solids and Structures, 2007 In Press.
3. Gustafson, P. A. and Waas, A. M., "A macroscopic joint finite element for a symmetric double lap joint," Proceedings of the American Society of Composites 21st Annual Technical Conference, No. 204, American Society of Composites, Sept 2006.
4. Adams, R., Comyn, J., and Wake, W., Structural Adhesive Joints in Engineering, Chapman and Hall, 1997.
5. Oterkus, E., Madenci, E., Smeltzer III, S., and Ambur, D., "Thermo-Mechanical Analysis of Bonded Cylindrically Curved Composite Shell Structures," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 47th Structures, Structural Dynamics, and Materials Conference, May 1-4, Newport, RI, No. 2006-1963, American Institute of Aeronautics and Astronautics, 2006.
6. Wooley, G. R. and Carver, D. R., "Stress Concentration Factors for Bonded Lap Joints," J. Aircraft, Vol. 8, 1971, pp. 817-820.
7. Adams, R. D. and Peppiatt, N. A., "Stress Analysis of Adhesive-Bonded Lap Joints," J. Strain Analysis, Vol. 9, No. 3, 1974, pp. 185-196.
8. Kafkalidis, M. S. and Thouless, M. D., "The effects of geometry and material properties on the fracture of single lap-shear joints," International Journal of Solids and Structures, Vol. 39, No. 17, Aug. 2002, pp. 4367-4383.
9. Xie, D., Waas. A. M., Shahwan, K. W., Schroeder, J. A., and Boeman, R. G., "Fracture criterion for kinking cracks in a tri-material adhesively bonded joint under mixed mode loading," Engineering Fracture Mechanics, Vol. 72, No. 16, Nov. 2005, pp. 2487-2504.
10. Li, S., Thouless, M., Waas, A., Schroeder, J., and Zavattieri, P., "Use of a cohesive-zone model to analyze the fracture of a fiber-reinforced polymer-matrix composite," Composites Science and Technology, Vol. 65, No. 3-4, March 2005, pp. 537-549.
11. Li, S., Thouless, M., Waas, A., Schroeder, J., and Zavattieri, P., "Competing failure mechanisms in mixed-mode fracture of an adhesively bonded polymer-matrix composite," International Journal of Adhesion and Adhesives, Vol. 26, No. 8, Dec. 2006, pp. 609-616.
12. Valoroso, N. and Champaney, L., "A damage-mechanics-based approach for modelling decohesion in adhesively bonded assemblies," Engineering Fracture Mechanics, Vol. In Press, Corrected Proof, 2006, pp. -.
13. Xie, D. and Waas, A. M., "Discrete cohesive zone model for mixed-mode fracture using finite element analysis," Engineering Fracture Mechanics, Vol. 73, No. 13, Sept. 2006, pp. 1783-1796.
14. Weerts, U. and Kossira, H., "Mixed mode fracture characterization of adhesive joints," ICAS Congress, International Congress Aeronautical Sciences, 2000, Harrogate (GB), pp 451.1-451.9.
15. Aydemir, A. and Gunay, D., "The fuzzy finite element stress analysis of adhesive-bonded single lap joints," Turkish J. Eng. Env. Sci, 2003, pp. 121-127.
16. Koutsourelakis, P., Kuntiyawichai, K., and Schueller, G., "Effect of material uncertainties on fatigue life calculations of aircraft fuselages: A cohesive element model," Engineering Fracture Mechanics, Vol. 73, No. 9, June 2006, pp. 1202-1219.
17. Gillespie, Jr, J. W., Carlsson, L. A., and Pipes, R. B., "Finite element analysis of the end notched flexure specimen for measuring mode II fracture toughness," Composites Science and Technology, Vol. 27, No. 3, 1986, pp. 177-197.
18. Wang, J. T., Raju, I. S., and Sleight, D. W., "Fracture mechanics analyses of composite skin-stiffener debond configurations with shell elements," No. 94-1389 -CP, 1994.
19. Glaessgen, E., Raju, I., and CC. Poe, J., "Fracture mechanics analysis of stitched stiffener-skin debonding," No. 98-2022, 1998.
20. Krueger, R., "Virtual crack closure technique: History, approach, and applications," Applied Mechanics Reviews, Vol. 57, No. 2, 2004, pp. 109-143.
21. Xie, D., Waas, A. M., Shahwan, K. W., Schroeder, J. A., and Boeman, R. G., "Computation of Energy Release Rates for Kinking Cracks based on Virtual Crack Closure Technique," Computer Modeling in Engineering & Sciences, Vol. 6, 2004, pp. 515-524.
22. Xie, D., Salvi, A. G., Waas, A. M., and Caliskan, A., "Discrete cohesive zone model to simulate static fracture in carbon fiber textile composites," 46th AIAA/ASME/ASCE/AHS/ASC Structures, Structrual Dynamics and Materials Conference, 2005.
23. Xie, D. and Sherrill B. Biggers, J., "Progressive crack growth analysis using interface element based on the virtual crack closure technique," Finite Elem. Anal. Des., Vol. 42, No. 11, 2006, pp. 977-984.
24. Munoz, J., Galvanetto, U., and Robinson, P., "On the numerical simulation of fatigue driven delamination with interface elements," International Journal of Fatigue, Vol. 28, No. 10, Oct. 2006, pp. 1136-1146.
25. Goncalves, J. P. M., de Moura, M. F. S. F., and de Castro, P. M. S. T., "A three-dimensional finite element model for stress analysis of adhesive joints," International Journal of Adhesion and Adhesives, Vol. 22, No. 5, 2002, pp. 357-365.
26. Goyal, V. K., Johnson, E. R., and Cassino, C., "Computational model for progressive failure of adhesivley bonded joints," 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structrual Dynamics and Materials Conference, 2003.
27. ABAQUS, Inc, ABACUS User Manual v6.5, Electronic Version, 2006.
28. Sandia National Laboratory, Tahoe User Guide, 3rd ed., May 2003.
29. Oterkus, E., Barut, A., Madenci, E., Smeltzer III, S., and Ambur, D., "Nonlinear analysis of bonded composite single-lap joints," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 45th Structures, Structural Dynamics, and Materials Conference, April 19-22, Palm Springs, CA, No. 2004-1560, American Institute of Aeronautics and Astronautics, 2004.
30. Oterkus, E., Madenci, E., Smeltzer III, S., and Ambur, D., "Nonlinear analysis of bonded composite tubular lap joints," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 46th Structures, Structural Dynamics, and Materials Conference, April 18-21, Austin, TX, No. 2005-2380, American Institute of Aeronautics and Astronautics, 2005.
31. Smeltzer III, S. S. and Lundgren, E., "Analytical and Numerical Results for an Adhesively Bonded Joint Subjected to Pure Bending," Proceedings of the AIAA/ASME/ASCE/AHS/ASC 41th Structures, Structural Dynamics, and Materials Conference, May 1-4 2006, Newport RI, No. 2006-1960, American Institute of Aeronautics and Astronautics, 2006.
32. Bednarcyk, B. A., Zhang, J., Collier, C. S., Bansal, Y., and Pindera, M. J., "Analysis tools for adhesively bonded composite joints, Part 1: Higher-order theory," AIAA JOURNAL, Vol. 44, No. 1, Jan. 2006, pp. 171-180.
33. Gustafson, P. A. and Waas, A, M., "A macroscopic finite element for a symmetric doublelap joint subjected to mechanical and thermal loading," Computer Methods in Applied Mechanics and Engineering To Be Submmitted, 2007.
34. Kilic, B., Madenci, E., and Ambur, D., "Global-local finite element analysis of bonded single-lap joints," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structrual Dynamics and Materials Conference, April 19-22, Palm Springs, CA, 2004, pp. 1-13.
35. Hart-Smith, L., "Adhesive-Bonded Double-Lap Joints," NASA Contractor Report 112235, 1973.
36. Zhang, J., Collier, C., Bansal, Y., Bednarcyk, B, A., and Pindera, M.-J., "Analysis of Adhesively Bonded Composite Joints using a higher-order theory," 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structrual Dynamics and Materials Conference, April 19-22, Palm Springs CA, 2004, pp. 1-16.
37. Davies, G., Virtual work in structural analysis, John Wiley & Sons, 1982.
38. Cook, R. D., Malkus, D. S., and Plesha, M. E., Concepts and applications of finite element analysis, John Wiley & Sons, 1989.
39. ASTM International, ASTM D 3528-96 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading.
40. Herakovich, C. T., Mechanics of fibrous composites, John Wiley and Sons, Inc, 1998.