Evaluation of the recycling of coated magnesium using exergy analysis

Minerals Engineering

Volumn 20, Issue 9 SPEC. ISS., 2007, Pages 913-925

  Meskers, C E M ^a   Xiao, Y ^a   Boom, R ^a   Boin, U ^b   Reuter, M A ^c  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b Department of Civil and Environmental Engineering ^*  (Germany)

^c UNIVERSITY OF MELBOURNE   (Australia)

Author keywords

Coated magnesium; Exergy analysis; Modeling; Recycling

Indexed keywords

COMPUTER SIMULATION; CONSUMER PRODUCTS; EXERGY; MAGNESIUM ALLOYS; RECYCLING; SOLUBILITY; THERMODYNAMIC PROPERTIES;

COATED MAGNESIUM; EMF CELLS; EXERGY ANALYSIS;

COATED MATERIALS;

EID: 34447275003     PISSN: 08926875     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.mineng.2007.02.006     Document Type: Article

References (43)

1. Agarwala V., and Rajeshwar K. Paint and coating removal technologies: past, present and future, Corrosion 2001 (2001), NACE International, Houston
2. Anicai L., Masi R., Santamaria M., and Di Quarto F. A photoelectrochemical investigation of conversion coatings on Mg substrates. Corrosion Science 47 12 (2005) 2883-2900
3. ASTM. B-92: Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting (2001), ASTM International
4. Avedesian M., and Baker H. ASM Speciality Handbook: Magnesium and Magnesium Alloys (1999), ASM International, New York
5. Blanchard P., Hill D., Bretz G., and McCune R. Evaluation of corrosion protection methods for magnesium alloys in automotive applications. In: Neelameggham N., Kaplan H., and Powell B. (Eds). Magnesium Technology 2005 (2005), The Minerals, Metals and Materials Society, TMS, Warrendale, USA 463-468
6. Blawert C., Heitmann V., Dietzel W., Nykyforchyn H., and Klapkiv M. Influence of process parameters on the corrosion properties of electrolytic conversion plasma coated magnesium alloys. Surface and Coatings Technology 200 1-4 (2005) 68-72
7. Boin U. Im Magnesium-Kreislauf klafft eine Lücke. Metall 55 5 (2001) 283-286
8. Brunelli K., Dabalá M., Calliari I., and Magrini M. Effect of HCl pre-treatment on corrosion resistance of cerium-based conversion coatings on magnesium and magnesium alloys. Corrosion Science 47 4 (2005) 989-1000
9. Curran J., and Clyne T. The thermal conductivity of plasma electrolytic oxide coatings on aluminium and magnesium. Surface and Coatings Technology 199 2-3 (2005) 177-183
10. Ditze A., and Scharf C. Study of mass flow balances for the recycling of magnesium scrap alloys and waste. Erzmetall 58 1 (2005) 3-8
11. Effenberg G., Prince A., Lebrun N., Lukas H., and Harmelin M. Light metal systems. Part 2. Selected Systems from Al-Cu-Fe to Al-Fe-Ti. Landolt-Börnstein - Group IV Physical Chemistry Vol. 11 (2005), Springer Verlag Chapter Al-Cu-Mg, pp. 1-32
12. Evans R., and Guest G. The Aluminium Decoating Handbook (2002), Stein Atkinson Stordy Ltd.
13. Factsage: 2006 version 5.4.1, www.factsage.com.
14. Fincher L., and Desy D. The magnesium-titanium phase diagram to 1.0 pct titanium. Transactions of the metallurgical society of AIME 242 (1968) 2069-2073
15. Franke P., Neuschütz D., and SGTE. Thermodynamic Properties of Inorganic Materials. Landolt-Börnstein - Group IV Physical Chemistry (2004), Springer Verlag
16. 3 on anodization of MgAlZn alloy in 3 M KOH solution. Corrosion Science 46 9 (2004) 2135-2142
17. Gong M., and Wall G. On exergy and sustainable development - Part 2: Indicators and methods. Exergy, An International Journal 1 4 (2001) 217-233
18. Gonzalez-Nunez M., Nunez-Lopez C., Skeldon P., Thompson G., Karimzadeh H., Lyon P., and Wilks T. A non-chromate conversion coating for magnesium alloys and magnesium-based metal matrix composites. Corrosion Science 37 11 (1995) 1763-1772
19. Gray J., and Luan B. Protective coatings on magnesium and its alloys - a critical review. Journal of Alloys and Compounds 336 1-2 (2002) 88-113
20. Guo H., and An M. Growth of ceramic coatings on AZ91D magnesium alloys by micro-arc oxidation in aluminatefluoride solutions and evaluation of corrosion resistance. Applied Surface Science 246 2-3 (2005) 229-238
21. Hanko G., Griesser S., and Angerer T. Aufarbeitung von organisch beschichteten Magnesiumdruckgussteilen. Aluminium 81 3 (2005) 202-208
22. Hawke D., and Albright D. A phosphate-permanganate conversion coating for magnesium. Metal Finishing 93 10 (1995) 34-38
23. Javaid A., Essadiqi E., Bell S., and Davis B. Literature review on magnesium recycling. In: Luo A., Neelameggham N., and Beals R. (Eds). Magnesium Technology 2006 (2006), The Minerals, Metals and Materials Society, TMS, Warrendale, USA 7-12
24. Kimura K., Nishii K., and Karawada M. Recycling magnesium alloy housings for notebook computers. Fujitsu Scientific and Technical Journal 38 1 (2002) 102-111
25. Kouisni L., Azzi M., Zertoubi M., Dalard F., and Maximovitch S. Phosphate coatings on magnesium alloy AM60 part 1: study of the formation and the growth of zinc phosphate films. Surface and Coatings Technology 185 1 (2004) 58-67
26. Kramer, D., 2004. Magnesium yearbook. US Geological Survey.
27. Lian J., Li G., Niu L., Gu C., Jiang Z., and Jiang Q. Electroless NiP deposition plus zinc phosphate coating on AZ91D magnesium alloy. Surface and Coatings Technology 200 20-21 (2006) 5956-5962
28. Liang P., Tarfa T., Robinson J., Wagner S., Ochin P., Harmelin M., Seifert H., Lukas H., and Aldinger F. Experimental investigation and thermodynamic calculation of the Al-Mg-Zn system. Thermochimica Acta 314 1-2 (1998) 87-110
29. Liang J., Guo B., Tian J., Liu H., Zhou J., and Xu T. Effect of potassium fluoride in electrolytic solution on the structure and properties of microarc oxidation coatings on magnesium alloy. Applied Surface Science 252 2 (2005) 345-351
30. Lin C., and Fang S. Formation of cerium conversion coatings on AZ31 magnesium alloys. Journal of The Electrochemical Society 152 2 (2005) B54-B59
31. Meskers C., Kvithyld A., Reuter M., and Engh T. Thermal de-coating of magnesium - a first step towards recycling of coated magnesium. In: Luo A., Neelameggham N., and Beals R. (Eds). Magnesium Technology 2006 (2006), The Minerals, Metals and Materials Society, TMS, Warrendale, USA 33-38
32. Murray J. Phase diagrams of binary titanium alloys (1988), ASM International
33. Niu L., Jiang Z., Li G., Gu C., and Lian J. A study and application of zinc phosphate coating on AZ91D magnesium alloy. Surface and Coatings Technology 200 9 (2006) 3021-3026
34. Paul S. Surface coatings science and technology. second ed. (1996), John Wiley & Sons
35. Rosen M., and Dincer I. On exergy and environmental impact. International Journal of Energy Research 21 7 (1997) 643-654
36. Rosen M., and Dincer I. Exergy analysis of waste emissions. International Journal of Energy Research 23 13 (1999) 1153-1163
37. Shi X., Jarjoura G., and Kipouros G. Electroless nickel-phosphorus plating on AZ31 magnesium alloy pretreated with a chemical conversion coating. In: Luo A., Neelameggham N., and Beals R. (Eds). Magnesium Technology 2006 (2006), The Minerals, Metals and Materials Society, TMS, Warrendale, USA 291-297
38. Shresta S., Sturgeon A., Shashkov P., and Shatrov A. Improved corrosion performance of AZ91D magnesium alloy coated with the Keronite process. In: Kaplan H. (Ed). Magnesium Technology 2002 (2002), The Minerals, Metals and Materials Society, TMS, Warrendale
39. Skar J., and Albright D. Phosphate permanganate: a chrome-free alternative for magnesium pre-treatment. In: Kainer K. (Ed). Magnesium Alloys and their Applications (2000), Wiley VCH, Weinheim 469-474
40. Szargut J. Exergy method - technical and ecological applications. International Series on Developments in Heat Transfer vol. 18 (2005), WIT Press, UK
41. Verdier S., Boinet M., Maximovitch S., and Dalard F. Formation, structure and composition of anodic films on AM60 magnesium alloy obtained by DC plasma anodising. Corrosion Science 47 6 (2005) 1429-1444
42. Wall G., and Gong M. On exergy and sustainable development - part 1: Conditions and concepts. Exergy International Journal 1 3 (2001) 128-145
43. Zhao M., Wu S., Luo J., Fukuda Y., and Nakae H. A chromium-free conversion coating of magnesium alloy by a phosphatepermanganate solution. Surface and Coatings Technology 200 18-19 (2006) 5407-5412