Mechanical properties of Al-60 pct SiCp composites alloyed with Mg

Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science

Volumn 35 A, Issue 7, 2004, Pages 2127-2141

  Ahlatci, H ^a   Candan, E ^b   Cimenoglu H ^a  

^a ISTANBUL TECHNICAL UNIVERSITY   (Turkey)

^b KARABUK UNIVERSITY   (Turkey)

Author keywords

[No Author keywords available]

Indexed keywords

ADDITION REACTIONS; ADHESION; ALUMINUM; INFILTRATION; MAGNESIUM PRINTING PLATES; MECHANICAL ALLOYING; MECHANICAL PROPERTIES; MECHANICAL TESTING; POROSITY; PRECIPITATION (CHEMICAL); SILICON CARBIDE; WEAR RESISTANCE;

PRESSURE INFILTRATION; SEQUENTIAL PERIODS; WEAR TESTING; WEIGHT LOSS;

METALLIC MATRIX COMPOSITES;

EID: 3442878413     PISSN: 10735623     EISSN: None     Source Type: Journal    
DOI: 10.1007/s11661-004-0161-1     Document Type: Article

References (71)

1. J.E. Allison and G.S. Cole: JOM, 1993, vol. 45, pp. 19-24.
2. J.E. Allison and R. Sandstrom: Key Eng. Mater., 1995, vols. 104-107, pp. 3-36.
3. V.M. Kevborkijan: JOM, 1999, vol. 51, pp. 54-58.
4. G. Garcia-Cordovilla, J. Narciso, and E. Louis: Wear, 1996, vol. 192, pp. 170-77.
5. I.M. Hutchings: Mater. Sci. Technol., 1994, vol. 10, pp. 513-17.
6. A.T. Alpas and J. Zhang: Metall. Mater. A, 1994, vol. 25, pp. 969-83.
7. Y.N. Liang, Y.Z. Ma, S.Z. Li, S. Li, and J. Bi: J. Mater. Sci. Lett., 1995, vol. 14, pp. 114-16.
8. A.P. Sannino and H.J. Rack: Wear, 1996, vol. 197, pp. 151-59.
9. K.S. Al-Rubaie, H. Goldenstein, and J.D. Biasoli Mello: Wear, 1999, vols. 233-235, pp. 444-54.
10. K.S. Al-Rubaie, H. Goldenstein, and J.D. Biasoli Mello: Wear, 1999, vols. 225-229, pp. 163-173.
11. E. Candan, H. Ahlatci, and H. Cimenoǧlu: Wear, 2001, vol. 247, pp. 133-138.
12. W.A. Zamzam: Metallurgy, 1991, vol. 45, pp. 250-54.
13. A. Wang and H.J. Rack: Wear, 1991, vol. 146, pp. 337-48.
14. A. Wang and H.J. Rack: Wear, 1991, vol. 147, pp. 355-74.
15. A.T. Alpas and J. Zhang: Wear, 1992, vol. 155, pp. 83-104.
16. P.N. Pramila Bai, B.S. Ramasesh, and M.K. Surappa: Wear, 1992, vol. 157, pp. 295-304.
17. A. Alahelisten, F. Bergman, M. Olsson, and S. Hogmark: Wear, 1993, vol. 165, pp. 221-26.
18. N. Axen, A. Alahelisten, and S. Jacobson: Wear, 1994, vol. 173, pp. 95-104.
19. Z.F. Zhang, L.C. Zhang, and Y.W. Mai: J. Mater. Sci., 1995, vol. 30, pp. 1961-66.
20. H. Akbulut, M. Durman, and F. Yilmaz: Wear, 1998, vol. 215, pp. 170-79.
21. Y. Iwai, T. Honda, T. Miyajima, Y. Iwasaki, and M.K. Surappa: Compos. Sci. Technol., 2000, vol. 60, pp. 1781-89.
22. S.C. Tjong and K.C. Lau: Mater. Lett., 2000, vol. 43, pp. 274-80.
23. C.Y. Sheu and S.C. Lin: Scripta Metall. Mater., 1996, vol. 35, pp. 1271-76.
24. A.T. Alpas and J. Zhang: Scripta Metall. Mater., 1992, vol. 26, pp. 505-09.
25. X.Y. Li and K.N. Tandon: Wear, 2000, vol. 245, pp. 148-61.
26. G. Straffelini: Wear, 2000, vol. 245, pp. 216-22.
27. S. Das, D.P. Mondal, S. Sawla, and S. Dixit: Metall. Mater. Trans. A, 2002, vol. 33, pp. 3031-44.
28. M. Bai, Q. Xue, and H. Guo: Wear, 1996, vol. 194, pp. 126-36.
29. J. Sing and A.T. Alpas: Scripta Metall. Mater., 1993, vol. 32, pp. 1099-1110.
30. J. Sing and A.T. Alpas: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 3135-48.
31. S.Y. Yu, H. Ishii, K. Tohgo, Y.T. Cho, and D. Diao: Wear, 1997, vol. 213, pp. 21-28.
32. M. Muratoǧlu and M. Aksoy: Mater. Sci. Eng. A, 2000, vol. 282, pp. 91-99.
33. H. Ahlatci, E. Candan, and H. Çimenoǧlu: 29th Leeds-Lyon Symp. on Tribology, Tribological Research and Design for Engineering Systems, D. Dowson, Z.M. Jin, and J.B. Medley eds., Leeds, England, 2003, pp. 637-42.
34. J.J. Ahn and S. Ochiai: Adv. Compos. Lett., 2002, vol. 11, pp. 299-304.
35. T.M. Liu and C.G. Cao: Mater. Sci. Eng. A, 1993, vol. 169, pp. 79-84.
36. H. Ahlatci: Ph.D. Thesis, Istanbul Technical University, Istanbul, June 2003.
37. E. Candan, H.V. Attkinson, and H. Jones: Key Eng. Mater., 1997, vol. 127, pp. 463-70
38. E. Candan, H.V. Attkinson, and H. Jones: J. Mater. Sci., 1997, vol. 32, pp. 289-94.
39. E. Candan, H.V. Attkinson, and H. Jones: Scripta Metall. Mater., 1998, vol. 38, pp. 999-1002
40. J. Narciso, A. Alonso, A. Pamies, C. Garcia-Cordovilla, and E. Louis: Scripta Metall. Mater., 1994, vol. 31, pp. 1495-1500.
41. E. Candan: Ph.D. Thesis, University of Sheffield, Sheffield, July 1998.
42. S.Y. Oh, J. Cornie, and K.C. Russell: Metall. Trans. A, 1989, vol. 20A, pp. 527-32.
43. M. Kobashi and T. Choh: J. Mater. Sci., 1993, vol. 28, pp. 684-90.
44. M. Yang and Y.D. Scott: J. Mater. Sci., 1991, vol. 26, pp. 2245-54.
45. M.Y. Liu, S.B. Kang, and H.W. Kim: Mater. Lett., 1999, vol. 41, pp. 267-72.
46. G.R. Cappleman, J.F. Watts, and T. Wclyne: J. Mater. Sci., 1985, vol. 20, pp. 2159-68.
47. H. Ahlatci, M.S. Karakas, E. Candan, and H. Çimenoǧlu: Mater. Sci. Technol., 2003, vol. 19, pp. 1-6.
48. E.H. Dix, F. Keller, and R.W. Graham: Trans. AIME, 1931, vol. 93, p. 404.
49. H.W.L. Philips: J. Inst. Met., 1946, vol. 72, pp. 151-60.
50. T. Iseki, T. Kameda, and T. Maruyama, J. Mater. Sci, 1984, vol. 19, pp. 1692-98.
51. H. Ribes, M. Suery, G. Lesperance, and J.G. Legoux: Metall. Trans. A, 1990, vol. 21A, pp. 2489-96.
52. K.B. Lee and H. Kwon: Scripta Metall. Mater., 1997, vol. 36, pp. 847-52.
53. J.K. Park and J.P. Lucas: Scripta Metall. Mater., 1997, vol. 37, pp. 511-16.
54. G. Carotenuto, A. Gallo, and L. Nicolais: J. Mt. Sci., 1994, vol. 29, pp. 4967-74.
55. E.A. Feest: Composites, 1994, vol. 25, pp. 75-85.
56. D.J. Lloyd and I. Jin: Metall. Trans. A, 1988, vol. 19A, pp. 3107-16.
57. M. Romero: Diss. Abstr. Int., 1994, vol. 55, pp. 179-89.
58. L. Froyen and A. Deruyttere: Metallic Composite Materials and Microgravity, In Proc. of the 4th Eur. Symp. on Materials Science under Microgravity, Madrid, Spain, Apr. 5-8, 1983, pp. 31-36.
59. E.E. Schmid, K.V. Oldenburg, and G. Frommeyer: Z. Metallkd, 1990, vol. 81, pp. 809-15.
60. H. Ribes, S. Da, M. Suery, and T. Bretheau: Mater. Sci. Technol., 1990, vol. 6, pp. 621-28.
61. L. Salvo, M. Suey, J. Glegoux, and G.L. Esperance: Mater. Sci. Eng. A, 1991, vol. 135, pp. 129-33.
62. Y.Z. Lü, Q.D. Wang, X.Q. Zeng, Y.P. Zhu, and W.J. Ding: Mater. Sci. Eng. A, 2001, vol. 301, pp. 255-58.
63. M.K. Aghanajan, M.A. Rocazella, J.T. Burke, and S.D. Keck: J. Mater. Sci., 1991, vol. 26, pp. 447-54.
64. A. Wang and H.J. Rack: Mater. Sci. Eng. A, 1991, vol. 147, pp. 211-24.
65. T. Ma, H. Yamaura, D.A. Koss, and R.C. Voigt: Mater. Sci. Eng. A, 2003, vol. 360, pp. 116-25.
66. M.Y. Pan, M.E. Fine, and H.S. Gheng: Scripta Metall. Mater., 1990, vol. 24, pp. 1341-45.
67. L.H. Lee, W.H. Lu, and S. Chan: Wear 1992, vol. 159, pp. 223-31.
68. S.J. Lin, C.A. Lin, G.A. Wu, and J.L. Horng: J. Mater. Sci., 1996, vol. 31, pp. 3481-86.
69. O.P. Modi, B.K. Prasad, A.H. Yegneswarar, and M.L. Vaidya: Mater. Sci. Eng. A, 1992, vol. 151, pp. 235-45.
70. S.J. Lin and K.S. Liu: Wear, 1988, vol. 121, pp. 1-14.
71. S.K. Thakur and B.K. Dhindaw: Wear, 2001, vol. 247, pp. 191-201.