Determination of interface properties between micron-thick metal film and ceramic substrate using peel test

International Journal of Fracture

Volumn 144, Issue 2, 2007, Pages 103-112

  Zhao, Haifeng ^a   Wei, Yueguang ^a  

^a INSTITUTE OF MECHANICS   (China)

Author keywords

Cohesive zone model; Interfacial toughness; Inverse analysis; Metal thin film; Peel test

Indexed keywords

CERAMIC MATERIALS; COPPER; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; NEURAL NETWORKS; PLASTICITY; STRENGTH OF MATERIALS; SUBSTRATES; THIN FILMS; TOUGHNESS;

COHESIVE ZONE; INTERFACIAL TOUGHNESS; PEEL TEST; SEPARATION STRENGTH;

INTERFACES (MATERIALS);

EID: 34250898029     PISSN: 03769429     EISSN: 15732673     Source Type: Journal    
DOI: 10.1007/s10704-007-9083-4     Document Type: Article

References (36)

1. ABAQUS Inc (2004) ABAQUS Version 6.5 Documentation
2. Asai H, Iwase N and Suga T (2001). Influence of ceramic surface treatment on peel-off strength between aluminum nitride and epoxy-modified polyaminobismaleimide adhesive. IEEE Trans Adv Pack 24: 104-112
3. Bundy K, Schlegel U and Rahn B (2000). Improved peel test method for measurement of adhesion to biomaterials. J Mater Sci: Mater in Med 11: 517-521
4. Cotterell B, Hbaieb K and Williams JG (2006). The root rotation in double cantilever beam and peel tests. Mech Mater 38: 571-584
5. Cui J, Wang R and Sinclair AN (2003). A calibrated finite element model of adhesive peeling. Int J Adhes Adhesives 23: 199-206
6. Dillard DA, Pocius AV (eds) (2002) The mechanics of adhesion. Elsevier press
7. Evans AG, Hutchinson JW and Wei Y (1999). Interface adhesion: Effects of plasticity and segregation. Acta Mater 47: 4093-4113
8. Ferracin T, Landis CM and Delannay F (2003). On the determination of the cohesive zone properties of an adhesive layer from the analysis of the wedge-peel test. Int J Solids Struct 40: 2889-2904
9. Fleck NA and Hutchinson JW (1993). A phenomenological theory for strain gradient effects in plasticity. J Mech Phys Solids 41: 1825-1857
10. Fleck NA and Hutchinson JW (1997). Strain gradient plasticity. Adv Appl Mech 33: 295-361
11. Fleck NA and Hutchinson JW (2001). A reformulation of strain gradient plasticity. J Mech Phys Solids 49: 2245-2271
12. Hadavinia H, Kawashita L and Kinloch AJ (2006). A numerical analysis of the elastic-plastic peel test. Eng Fract Mech 73: 2324-2335
13. Huang Y, Qu S and Hwang KC (2004). A conventional theory of mechanism-based strain gradient plasticity. Int J Plast 20: 753-782
14. Kim KS and Aravas N (1988). Elasto-plastic analysis of the peel test. Int J Solids Struct 24: 417-435
15. Kim J, Kim KS and Kim YH (1989). Mechanical effects of peel adhesion test. J Adhes Sci Tech 3: 175-187
16. Kinloch AJ, Lau CC and Williams JG (1994). The peeling of flexible laminates. Int J Fract 66: 45-70
17. MATLAB Inc (2004) MATLAB Version 7.0 Documentation
18. Moidu AK, Sinclair AN and Spelt JK (1995). Analysis of the peel test: prediction of adherend plastic dissipation and extraction of fracture energy in metal-to-metal adhesive joints. J Test Evaluat 23: 241-253
19. Moidu AK, Sinclair AN and Spelt JK (1998). On the determination of fracture energy using the peel test. J Test Evaluat 26: 247-254
20. Pardoen T, Ferracin T and Landis CM (2005). Constraints effects in adhesive joint fracture. J Mech Phys Solids 53: 1951-1983
21. Park IS and Yu J (1998). An X-ray study on the mechanical effects of the peel test in a Cu/Cr/polyimide system. Acta mater 46: 2947-2953
22. Park YB, Park IS and Yu J (1999). Interfacial fracture energy measurement in the Cu/Cr/polyimide system. Mater Sci Eng A 266: 261-266
23. Shi M, Huang Y and Jiang H (2001). The boundary-layer effect on the crack tip field in mechanism-based strain gradient plasticity. Int J Fract 112: 23-41
24. Song JY and Yu J (2002). Analysis of the T-peel strength in a Cu/Cr/ Polyimide system. Acta Mater 50: 3985-3994
25. Tvergaard V and Hutchinson JW (1993). The influence of plasticity on mixed mode interface fracture. J Mech Phys Solids 41: 1119-1135
26. Wei Y (2002). Thin layer splitting along the elastic-plastic solid surface. Int J Fract 113: 233-252
27. Wei Y (2004). Modeling nonlinear peeling of ductile thin films - critical assessment of analytical bending models using FE simulations. Int J Solids Struct 41: 5087-5104
28. Wei Y (2006). A new finite element method for strain gradient theories and applications to fracture analyses. Eur J Mech A/Solids 25: 897-913
29. Wei Y and Hutchinson JW (1997). Steady-state crack growth and work of fracture for solids characterized by strain gradient plasticity. J Mech Phys Solids 45: 1253-1273
30. Wei Y and Hutchinson JW (1998). Interface strength, work of adhesion and plasticity in the peel test. Int J Fract 93: 315-333
31. Wei Y and Xu G (2005). A multiscale model for the ductile fracture of crystalline materials. Int J Plast 21: 2123-2149
32. Wei Y, Qiu X and Hwang KC (2004). Steady-state crack growth and fracture work based on the theory of mechanism-based strain gradient plasticity. Eng Fract Mech 71: 107-125
33. Wei Y, Zhao H, Cao A (2006) Modeling and measurement of plastic dissipation in micron-thickness thin film peeling, The 12th International Symposium on Plasticity, Halifax, Canada, July 17-22
34. Yang QD and Thouless MD (2001). Mixed-mode fracture analyses of plastically-deforming adhesive joints. Int J Fract 110: 175-187
35. Yang QD, Thouless MD and Ward SM (1999). Numerical simulations of adhesively-bonded beams failing with extensive plastic deformation. J Mech Phys Solids 47: 1337-1353
36. Yang QD, Thouless MD and Ward SM (2001). Elastic-plastic mode-II fracture of adhesive joints. Int J Solids Struct 38: 3251-3262