Permeability damage due to water injection containing oil droplets and solid particles at residual oil saturation

SPE Middle East Oil and Gas Show and Conference, MEOS, Proceedings

Volumn 1, Issue , 2007, Pages 106-113

  Ali, Mohammad A J ^c   Currie, Peter K ^a   Salman, Mohammad J ^b  

^a DELFT UNIVERSITY OF TECHNOLOGY   (Netherlands)

^b Kuwait Inst for Scientific   (Kuwait)

^c NONE

Author keywords

[No Author keywords available]

Indexed keywords

EMULSIONS; FILTRATION; HEMATITE; MECHANICAL PERMEABILITY; PARTICLE SIZE ANALYSIS; SANDSTONE;

OIL DROPLETS; PRESSURE MAINTENANCE; RESIDUAL OIL SATURATION; SOLID PARTICLES;

WATER INJECTION;

EID: 34250813902     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: 10.2523/104608-ms     Document Type: Conference Paper

References (25)

1. Ali, M.A.J., P.K. Currie and M.J. Salman (2005). "Effect of Residual Oil on the Particle Deposition in Deep-Bed Filtration During Produced Water Reinjection." SPE-94483.
2. AH, M.A.J., P.K. Currie and M.J. Salman (2005). "Measurement of the particle deposition profile in deep-bed filtration during produced water re-injection." SPE-93056.
3. Barkman, J.H., A. Abrams, H.C.H. Darley and H.J. Hill (1975). "An Oil-Coating Process to Stabilize Clay in Fresh Waterflooding Operations." J. Petroleum Science and Engineering, SPE-4786: 1053-1059.
4. Bennion, D.B., F.B. Thomas, D.W. Bennion and R.F. Bietz (1994). Injection Water Quality - A key Factor to Successful Waterflooding. Petroleum Society of CIM & AOSTRA, 45th annual technical meeting, Calgary, Canada.
5. Bennion, D.B., F.B. Thomas, D.W. Bennion and R.F. Bietz (1995). "Advances in Laboratory Core flow Evaluation to Minimize Formation Damage Concerns with Vertical/Horizontal Drilling Application." Society of Core Analysis CAODC 95-105.
6. Bennion, D.B., F.B. Thomas, D.W. Bennion and R.F. Bietz (1995). "Mechanisms of Formation Damage and Permeability Impairment Associated With The Drilling Completion and Production of Low API Gravity Oil Reservoirs." SPE-30320.
7. Civan F. (1990). "Generalized model for formation damage by rock-fluid interaction and particle process." SPE-21183.
8. Civan F. (1992). "Evaluation and Comparison of the Formation Damage Models." SPE-23787.
9. Gruesbeck, C. and R.E. Collins (1982). "Entrainment and deposition of fine panicles in porous media." J, Petroleum Science and Engineering 22:874-856.
10. Janssen P. (2000). Characterization of oil-water mixtures produced in high-water cut oil wells. Faculty of Civil Engineering and Geosciences, Department of Applied Earth Sciences. Delft, Delft University of Technology. PhD: 139.
11. Jorin (2006) www.jorin.co.uk/oil_
12. Loneron, D. and J.F. Argillier (1995). "An Integrated Experimental Approach for Evaluating Formation Damage Due to Drilling and Completion Fluids." SPE-30089.
13. Ohen, H.A. and F. Civan (1990). "Permeability-porosity relationship in sedimentary rock." The Log Analyst: 38-62.
14. Ohen, H.A. and F. Civan (1993). "Simulation of Formation Damage in Petroleum Reservoir." SPE-19420.
15. Ohen, H.A., L. Nnebuihe, B.J. Felber and C.M. Holmgnen (1996). "A Systematic Laboratory Core and Fluid Analysis Program for the Design of a Cost Effective Treatment and Cleanup Guidelines for Produced Water Disposal Scheme." SPE/DOE 35369.
16. Ohen H.A. (1991). "Predicting Skin Effects Due to Formation Damage by Fines Migration " SPE-21675.
17. Rao D.N. (1997). "Is there a correlation between wettability from corefloods and contact angles.SPE-37234.
18. Thro, M.E. and K.E. Arnold (1994). "Water Droplet Size Determination for Improved Oil Treater Sizing."
19. Vaz-Jr. A.S.L., P. Bedrikovetsky, C. Furtado, A. Siqueira and A.L. Souza (2006). "Effect of residual oil on reinjection of produced water." SPE-100341.
20. Vaz-Jr. A.S.L., P. Bedrikovetsky, C. Furtado, A. Siqueira and A.L. Souza (2006). "Injectivity impairment due to residual oil mobilization (Treatment of laboratory data)." SPE-100391.
21. Xiao, L., C. Piatti, F. Giacca, M. Bartosek, S. Nicula and G. Gallino (1999). "Studies on the Damage Induced by Drilling Fluids in Limestone Cores." SPE-50711.
22. Wojtanowicz, S.K. and Z. Krilov (1987). "Study of the Effect of Pore Blocking Mechanisms on Formation Damage." SPE-16233.
23. Zande M, (2000). Droplet break-up in turbulent oil-in-water flow through a restriction. Faculty of Civil Engineering and Geosciences, Department of Applied Earth Sciences. Delft, Delft University of Technology. MSc: 176.
24. Zhang, N.S., J.M. Somerville and A.C. Todd (1993). "An Experimental Investigation of the formation damage caused by produced water injection." SPE-26702.
25. Zhang N.S. (1994). Study of permeability alternation associated with the invasion of oil droplets and solid panicles in produced oily water into porous media Department of Petroleum Engineering, Heriot-Watt University. PhD.