Compressive properties of extruded polytetrafluoroethylene

Polymer

Volumn 48, Issue 14, 2007, Pages 4184-4195

  Jordan, Jennifer L ^a   Siviour, Clive R ^b   Foley, Jason R ^a   Brown, Eric N ^c  

^a AIR FORCE RESEARCH LABORATORY   (United States)

^b UNIVERSITY OF OXFORD   (United Kingdom)

^c LOS ALAMOS NATIONAL LABORATORY   (United States)

Author keywords

High strain rate mechanical properties; Polytetrafluoroethylene; Semi crystalline polymer

Indexed keywords

COMPRESSIVE STRENGTH; MECHANICAL TESTING; STRAIN RATE;

AEROSPACE STRUCTURAL APPLICATIONS; SPLIT HOPKINSON PRESSURE BARS (SHPB); ZERILLI-ARMSTRONG MODEL;

POLYTETRAFLUOROETHYLENES;

COMPRESSIVE PROPERTY; MECHANICAL PROPERTY; POLYTETRAFLUOROETHYLENE; TESTING INSTRUMENT;

EID: 34250681800     PISSN: 00323861     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.polymer.2007.05.038     Document Type: Article

References (53)

1. Walley S.M., Field J.E., Pope R.H., and Safford N.A. The rapid deformation behaviour of various polymers. Journal de Physique III France 1 (1991) 1889-1925
2. Gray III GT, Cady CM, Blumenthal WR. Influence of temperature and strain rate on the constitutive behavior of Teflon and Nylon. In: Plasticity '99: the seventh international symposium on plasticity and its current applications; 1999.
3. Walley S.M., and Field J.E. Strain rate sensitivity of polymers in compression from low to high rates. DYMAT Journal 1 3 (1994) 211-227
4. Rae P.J., and Dattelbaum D.M. The properties of poly(tetrafluoroethylene) (PTFE) in compression. Polymer 45 22 (2004) 7615-7625
5. Rae P.J., and Brown E.N. The properties of poly(tetrafluoroethylene) (PTFE) in tension. Polymer 46 19 (2005) 8128-8140
6. Rae P.J., Brown E.N., Clements B.E., and Dattelbaum D.M. Pressure-induced phase change in poly(tetrafluoroethylene) at modest impact velocities. Journal of Applied Physics 98 (2005) 1-8
7. Brown E.N., and Dattelbaum D.M. The role of crystalline phase on fracture and microstructure evolution of polytetrafluoroethylene (PTFE). Polymer 46 (2005) 3056-3068
8. Brown E.N., Trujillo C.P., Gray III G.T., Rae P.J., and Bourne N.K. Soft-recovery of polytetrafluoroethylene shocked through crystallizing phase II-III transition. Journal of Applied Physics 101 2 (2007) 024916
9. Brown EN, Clausen B, Brown DW. In situ measurement of crystalline lattice strains in phase IV polytetrafluoroethylene. Journal of Neutron Research, in press.
10. Brown E.N., Rae P.J., and Gray III G.T. The influence of temperature and strain rate on the tensile and compressive constitutive properties of four fluoropolymers. Journal de Physique IV France 134 (2006) 935-940
11. Brown E.N., Rae P.J., Orler B.E., Gray G.T., and Dattelbaum D.M. The effect of crystallinity on the fracture of polytetrafluoroethylene (PTFE). Materials Science and Engineering C 8 (2006) 1338-1343
12. Starkweather H.W. A comparison of the rheological properties of polytetrafluoroethylene below its melting point with certain low-molecular smectic states. Journal of Polymer Science 17 (1979) 73-79
13. McCrum N.G., Read B.E., and Williams G. Anelastic and dielectric effects in polymeric solids (1959), Wiley, New York
14. Sauer J.A., and Pae K.D. The flow of solid polymers under high pressure. Colloid and Polymer Science 252 (1974) 680-695
15. Chou S.C., Robertson K.D., and Rainey J.H. The effect of strain rate and heat developed during deformation on the stress-strain curve of plastics. Experimental Mechanics 13 (1973) 422-432
16. Briscoe B.J., and Hutchings I.M. Impact yielding of high density polyethylene. Polymer 17 (1976) 1099-1102
17. Kukureka S.N., and Hutchings I.M. Measurement of the mechanical properties of polymers at high strain rates by Taylor impact. In: Blazynski T.Z. (Ed). Proceedings of the seventh international conference on high energy rate fabrication (1981), University of Leeds, Leeds 29-38
18. Briscoe B.J., and Nosker R.W. The influence of interfacial friction on the deformation of high density polyethylene in a split Hopkinson pressure bar. Wear 95 (1984) 241-262
19. Briscoe B.J., and Nosker R.W. The flow stress of high density polyethylene at high rates of strain. Polymer Communication 26 (1985) 307-308
20. Brown EN, Willms RB, Gray III GT, Rae PJ, Cady CM, Vecchio KS, et al. Influence of molecular conformation on the constitutive response of polyethylene: a comparison of HDPE, UHMWPE, and PEX. Experimental Mechanics 2007;47(3):381-93.
21. Bauwens-Crowet C. The compression yield behaviour of PMMA over a wide range of temperature and strain rates. Journal of Materials Science 8 (1973) 968-979
22. Bauwens J.C. Relation between the compression yield stress and the mechanical loss peak of bisphenol-A-polycarbonate in the β transition range. Journal of Materials Science 7 (1972) 577-584
23. Bauwens-Crowet C., Bauwens J.C., and Homès G. The temperature dependence of yield of polycarbonate in uniaxial compression and tensile tests. Journal of Materials Science 7 (1972) 176-183
24. Rietsch F., and Bouette B. The compression yield behaviour of PC over a wide range of strain rates and temperatures. European Polymer Journal 26 (1990) 1071-1075
25. Siviour C.R., Walley S.M., Proud W.G., and Field J.E. Mechanical behaviour of polymers at high rates of strain. Journal de Physique IV 134 (2006) 949-955
26. Siviour C.R., Walley S.M., Proud W.G., and Field J.E. The high strain rate compressive behavior of polycarbonate and polyvinylidene fluoride. Polymer 46 (2005) 12546-12555
27. Mulliken A.D., and Boyce M.C. Mechanics of the rate-dependent elastic-plastic deformation of glassy polymers from low to high strain rates. International Journal of Solids and Structures 43 5 (2006) 1331-1356
28. Khan A., and Zhang H. Finite deformation of a polymer: experiments and modeling. International Journal of Plasticity 17 9 (2001) 1167-1188
29. Kletschkowski T., Schomburg U., and Bertram A. Endochronic viscoplastic material models for filled PTFE. Mechanics of Materials 34 12 (2002) 795-808
30. Bergstrom J.S., and Hilbert J.L.B. A constitutive model for predicting the large deformation thermomechanical behavior of fluoropolymers. Mechanics of Materials 37 8 (2005) 899-913
31. Zerilli F.J., and Armstrong R.W. Application of Eyring's thermal activation theory to constitutive equations for polymers. Shock compression of condensed matter - 1999 (1999), American Institute of Physics, Snowbird, UT
32. Zerilli F.J., and Armstrong R.W. Thermal activation based constitutive equations for polymers. Journal de Physique IV France 10 9 (2000) 3-8
33. Zerilli F.J., and Armstrong R.W. A constitutive equation for dynamic deformation behavior of polymers (2000), Naval Surface Warfare Center - Indian Head
34. Zerilli F.J., and Armstrong R.W. Thermal activation constitutive model for polymers applied to polytetrafluoroethylene. Shock compression of condensed matter - 2001 (2002), American Institute of Physics, Atlanta, GA
35. Zerilli F.J. Dislocation mechanics-based constitutive equations. Metallurgical and Materials Transactions A 35A (2004) 2547-2555
36. Zerilli F.J., and Armstrong R.W. A constitutive equation for the dynamic deformation behavior of polymers. Journal of Materials Science (2007)
37. Teflon PTFE 9B, fluoropolymer resin. Dupont Product Information, 1999.
38. Lehnert R.J., Hendra P.J., Everall N., and Clayden N.J. Comparative quantitative study on the crystallinity of poly(tetrafluoroethylene) including Raman, infra-red and F-19 nuclear magnetic resonance spectroscopy. Polymer 38 7 (1997) 1521-1535
39. Pucciariello R., and Villani V. Melting and crystallization behavior of poly(tetrafluoroethylene) by temperature modulated calorimetry. Polymer 45 6 (2004) 2031-2039
40. Androsch R., Wunderlich B., and Radusch H.J. Analysis of reversible melting in polytetrafluoroethylene. Journal of Thermal Analysis and Calorimetry 79 3 (2005) 615-622
41. Gray III G.T. In: Kuhn H., and Medlin D. (Eds). Classic split-Hopkinson pressure bar testing, in ASM handbook. Mechanical testing and evaluation vol. 8 (2002), ASM International: Materials Park 462-476
42. Tasker D.G., Dick R.D., and Wilson W.H. Mechanical properties of explosives under high deformation loading conditions. Shock compression of condensed matter - 1997 (1998), American Institute of Physics
43. Gorham D.A. Measurement of stress-strain properties of strong metals at very high rates of strain. Institute of Physics Conference Series 47 (1979) 16-24
44. Gorham D.A., Pope P.H., and Field J.E. An improved method for compressive stress strain measurement at very high strain rates. Proceedings of the Royal Society of London 438 (1992) 153-170
45. Mentha S.N., Pope P.H., and Field J.E. Progress in metal testing with a 3 mm pressure bar. Institute of Physics Conference Series 70 (1984) 175-176
46. Jia D., and Ramesh K.T. A rigorous assessment of the benefits of miniaturization in the Kolsky bar system. Experimental Mechanics 44 (2004) 445-454
47. Ramesh K.T., and Narasimhan S. Finite deformations and the dynamic measurement of radial strains in compression Kolsky bar experiments. International Journal of Solids and Structures 33 25 (1996) 3723-3738
48. Gray III G.T., and Blumenthal W.R. Split-Hopkinson pressure bar testing of soft materials. In: Kuhn H., and Medlin D. (Eds). Mechanical testing and evaluation. ASM handbook vol. 8 (2000), ASM International, Materials Park 488-496
49. Frantz C.E., Follansbee P.S., and Wright W.T. Experimental techniques with the split Hopkinson pressure bar. The eighth international conference on high energy rate fabrication (1984)
50. Frew D.J., Forrestal M.J., and Chen W. A split hopkinson pressure bar technique to determine compressive stress-strain data for rock materials. Experimental Mechanics 41 1 (2001) 40-46
51. Frew D.J., Forrestal M., and Chen W. Pulse shaping techniques for testing elastic-plastic materials with a split Hopkinson pressure bar. Experimental Mechanics 45 (2005) 186-195
52. Lee C.S., Caddell R.M., and Yeh G.S.Y. Cold extrusion and cold drawing of polymeric rod: the influence on subsequent tensile and compressive mechanical properties. Materials Science and Engineering 10 (1972) 241-248
53. Williams M.L., Landel R.F., and Ferry J.D. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. Journal of American Chemical Society 77 (1955) 3701-3707