High-velocity oxy-fuel coating of AMDRY 9954 on to Ti-6Al-4V alloy: Fracture toughness measurement

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 221, Issue 4, 2007, Pages 617-623

  Al Anazi, D ^a   Hashmi, M S J ^a   Yilbas, B S ^a  

^a KING FAHD UNIVERSITY OF PETROLEUM AND MINERALS   (Saudi Arabia)

Author keywords

Fracture toughness; HVOF coating; Three point bending

Indexed keywords

ANNEALING; CRACK INITIATION; ELASTIC MODULI; FRACTURE TOUGHNESS; INDENTATION; OXIDATION;

HIGH VELOCITY OXY FUELS (HVOF); SUBSTRATE INTERFACES; THREE POINT BENDING;

TITANIUM ALLOYS;

EID: 34250155586     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054JEM715     Document Type: Article

References (21)

1. Li, C. and Li, W. Effect of sprayed powder particle size on the oxidation behavior of MCrAlY materials during high velocity oxygen-fuel deposition. Surf. Coating Technol., 2002, 162, 31-44.
2. 2/NiCr 75/25 coatings after annealing treatments. Mater. Sci. Form, 1998, 278-281, 520-525.
3. Okada, R. Effect of heat treatment on characteristics of high velocity oxygen-fuel flame sprayed coatings (WC-27 mass%NiCr). J. Jap. Inst. Metals, 1997, 61, 625-628.
4. Tang, F., Ajdelsztajn, L., and Schoenung, J. M. Influence of cryomilling on the morphology and composition of the oxide scales formed on HVOF CoNiCrAlY coating. Oxidation of Metals, 2004, 61, 219-238.
5. Brandt, O. C. Mechanical properties of HVOF coatings. J. Thermal Spray Technol., 1995, 4, 147.
6. Nuutinen, S., Vuoristo, P., Ahmeniemi, S., Mantyla, T., and Takeuchi, J. A microstructural study of HVOF and VPS sprayed MCrAlY coatings. In Proceedings of the 2nd International thermal spray conference, Singapore, 2001, pp. 661-670 (ASM International, Materials Park, Ohio).
7. De Palo, S., Mohanty, M., Marc-Charles, H., and Dorfman, M. Fracture toughness of HVOF sprayed Wc-Co coatings. Thermal spray: surface engineering via applied research. In Proceedings of the 1st International Thermal spray conference, Montreal, Canada (Ed. C. C. Berndt), 2000, pp. 245-250 (ASM International, Materials Park, Ohio).
8. 2-NiCr coatings by plasma and HVOF spraying. Wear, 1997, 202, 208-214.
9. Lugscheider, E., Herbst C., and Zhao, L. Parameter studies on high-velocity oxy-fuel spraying of MCrAlY coatings. Surf. Coating Technol., 1998, 108-109, 16-23.
10. Wang, Y. Y., Li, C. J., and Ohmori, A. Examination of factors influencing the bond strength of high velocity oxy-fuel sprayed coatings. Surf. Coating Technol., 2006, 200, 2923-2928.
11. Zhao, L., Maurer, M., Fischer, F., Dicks, R., and Lugscheider, E. Influence of spray parameters on the particle in-flight properties and the properties of HVOF coating of WC-CoCr. Wear, 2004, 257, 41-46.
12. Al-Fadhli, H. Y. Performance evaluation of (HVOF) thermal spray coating using Inconel-625 powder. MSc Thesis, Mechanical Engineering Department, King Fahd University of Petroleum and Minerals, Saudi Arabia, 2003.
13. Oh, J., Kim, N. J., Lee, S., and Eui, L. W. Correlation of fatigue properties and microstructure in investment cast Ti-6Al-4V welds. Mater. Sci. Engng, 2003, A340, 232-242.
14. Higuera, V., Belzunce, F. J., Carriles, A., and Poveda, S. Influence of the thermal-spray procedure on the properties of a nickel-chromium coating. J. Mater. Sci., 2002, 37, 649-654.
15. Fawcett, N. Novel method for the measurement of Young's modulus for thick-Film resistor material by flexural testing of coated beams. Measmt Sci. Technol., 1998, 9, 2023-2026.
16. Charalambides, P. G., Lund, J., Evans, A. G., and McMeeking, R. M. Test specimen for determining the fracture resistance of bimaterial interfaces. J. Appl. Mechanics, 1989, 56, 77-82.
17. Murakami, Y. Stress intensity factors handbook, 3rd edition, 1992 (Committee on Fracture Mechanics, Society of Materials Science, Japan).
18. Oliver, W. C. and Pharr, G. M. Improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments. J. Mater. Res., 1992, 7, 1564-1580.
19. Niihara, K., Morena, R., and Hasselman, D. P. H. Indentation fracture toughness of brittle materials for palmqvist cracks. Fracture Mechanics of Ceramics, 1983, 5, 97-105.
20. Li, H., Khor, K. A., and Cheang, P. Young's modulus and fracture toughness determination of high velocity oxy-fuel-sprayed bioceramic coatings. Surf. Coating Technol., 2002, 155, 21-32.
21. Eylon, D. and Hall, J. Fatigue behavior of beta processed titanium alloy IMI 685. Metall. Trans. A, 1977, 8A, 981-990.