Recent research on identification of moving loads on bridges

Journal of Sound and Vibration

Volumn 305, Issue 1-2, 2007, Pages 3-21

  Yu, L ^a,b   Chan, Tommy H T ^b,c  

^a JINAN UNIVERSITY   (China)

^b HONG KONG POLYTECHNIC UNIVERSITY   (Hong Kong)

^c QUEENSLAND UNIVERSITY OF TECHNOLOGY   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

CIVIL ENGINEERING; GROUND VEHICLES; HIGHWAY BRIDGES; PARAMETER ESTIMATION; STRUCTURAL DESIGN; TIME DOMAIN ANALYSIS;

FORCE IDENTIFICATION; INTERPRETIVE METHODS; MEASUREMENT PARAMETERS;

LOADS (FORCES);

EID: 34249996515     PISSN: 0022460X     EISSN: 10958568     Source Type: Journal    
DOI: 10.1016/j.jsv.2007.03.057     Document Type: Article

References (56)

1. Fryba L. Vibration of Solids and Structures Under Moving Loads (1999), Thomas Telford Ltd., London
2. K.K. Stevens, Force identification problem-an overview, Proceedings of SEM Spring Conference on Experimental Mechanics, Florida, USA, 1987, pp. 838-844.
3. Dobson B.J., and Rider E. A review of the indirect calculation of excitation forces form measured structural response data. Proceedings of Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 204 (1990) 69-75
4. Olsson M. On the fundamental moving load problem. Journal of Sound and Vibration 145 2 (1991) 299-307
5. C. Koniditsiotis, R. Buckmaster, P. Fraser, Australian highway speed weigh-in-motion-an overview, Road Transport Technology-4, Proceedings of the Fourth International Symposium on Heavy Vehicle Weights and Dimensions, University of Michigan, Transportation Research Institute, Ann Arbor, 1995, pp. 143-151.
6. Moses F. Weigh-in-motion system using instrumented bridges. Journal of Transport Engineering, ASCE 105 (1978) 233-249
7. Norman O.K., and Hopkins R.C. Weighing vehicles in motion. Public Road 27 1 (1952) 1-17
8. R.J. Peters, Axway-a system to obtain vehicle axle weights, Proceedings of 12th ARRB Conference, Australia, 1984, pp. 19-29.
9. R.J. Peters, Culway-an unmanned and undetectable high speed vehicle weighing system, Proceedings of 13th ARRB/Fifth REAAA Conference, Australia, 1986, pp. 70-83.
10. D. Cebon, Assessment of the dynamic wheel forces generated by heavy road vehicles, Symposium on Heavy Vehicle Suspension and Characteristics, Austrain Road Research Board, 1987.
11. A.P. Whittemore, J.R. Wiley, P.C. Schultz, D.E. Pollock, Dynamic pavement loads of heavy highway vehicles, Highway Research Board, National Cooperative Highway Research Program Report No. 105, 1970.
12. R. Cantieni, Dynamic behavior of highway bridges under the passage of heavy vehicles, Swiss Federal Laboratories for Materials Testing and Research (EMPA) Report No. 220, 1992.
13. L. Yu, Accounting for Bridge Dynamic Loads Using Moving Force Identification System (MFIS), PhD Thesis, The Hong Kong Polytechnic University, Hong Kong, 2002.
14. O'Connor C., and Chan T.H.T. Dynamic loads from bridge strains. Journal of Structural Engineering, ASCE 114 (1988) 1703-1723
15. Chan T.H.T., Law S.S., Yung T.H., and Yuan X.R. An interpretive method for moving force identification. Journal of Sound Vibration 219 3 (1999) 503-524
16. Law S.S., Chan T.H.T., and Zeng Q.H. Moving force identification: a time domain method. Journal of Sound and Vibration 201 1 (1997) 1-22
17. Law S.S., Chan T.H.T., and Zeng Q.H. Moving force identification: a frequency and time domains analysis. Journal of Dynamic System, Measurement and Control, ASME 12 3 (1999) 394-401
18. Yu L., and Chan T.H.T. Moving force identification based on the frequency-time domain method. Journal of Sound and Vibration 261 2 (2003) 329-349
19. Yu L., and Chan T.H.T. Identification of multi-axle vehicle loads on bridges. Journal of Vibration and Acoustics, ASME 126 1 (2004) 17-26
20. Chan T.H.T., Law S.S., and Yung T.H. Moving force identification using an existing prestressed concrete bridge. Engineering Structures 22 (2000) 1261-1270
21. Chan T.H.T., Yu L., and Law S.S. Comparative studies on moving force identification from bridge strains in laboratory. Journal of Sound Vibration 235 1 (2000) 87-104
22. Sekhniashvili E.A., Byus I.E., and Sarkisov Y.S. Work of girder bridge structures under dynamic loads (in Russian). Beton i zhelezobeton 11 (1961) 491-494
23. Cai Y., Chen S.S., Rote D.M., and Coffey H.T. Vehicle guideway interaction for high-speed vehicles on a flexible guideway. Journal of Sound and Vibration 175 5 (1994) 625-646
24. Lee H.P. Transverse vibration of a Timoshenko beam acted on by an accelerating mass. Applied Acoustics 47 4 (1996) 319-330
25. Michaltsos G.T. Dynamic behavior of a single-span beam subjected to loads moving with variable speeds. Journal of Sound and Vibration 258 2 (2002) 359-372
26. Sadiku S., and Leipholz H.H.E. On the dynamics of elastic systems with moving concentrated masses. Ingenieur-Archiv 57 (1987) 223-342
27. Bilello C., Bergman L.A., and Kuchma D. Experimental investigation of a small-scale bridge model under a moving mass. Journal of Structural Engineering, ASCE 130 5 (2004) 799-804
28. Pesterev A.V., and Bergman L.A. Response of elastic continuous carrying moving linear oscillator. Journal of Engineering Mechanics, ASCE 123 8 (1997) 878-884
29. Yang B., Tan C.A., and Bergman L.A. Direct numerical procedure for solution of moving oscillator problems. Journal of Engineering Mechanics, ASCE 126 5 (2000) 269-462
30. K.B. Todd, B.T. Kulakowski, Simple computer models for predicting ride quality and loading for heavy trucks, Transportation Research Record, 1215, TRB, National Research Council, Washington, DC, 1989.
31. Chatterjee P.K., Datta T.K., and Surana C.S. Vibration of suspension bridges under vehicular movement. Journal of Structural Engineering, ASCE 120 3 (1994) 681-703
32. Lindfield G., and Penny J. Numerical Method using MATLAB (1995), Ellis Horwood Limit, London
33. AASHTO. Standard Specification for Highway Bridges (1996), American Association of State Highway and Transportation, Washington, DC, USA
34. Chan T.H.T., Yu L., Law S.S., and Yung T.H. Moving force identification studies II: comparative studies. Journal of Sound and Vibration 247 1 (2001) 77-95
35. Yang Y.B., and Yau J.D. Vehicle-bridge interaction element for dynamic analysis. Journal of Structural Engineering, ASCE 123 11 (1997) 1512-1518
36. Chan T.H.T., Yu L., Law S.S., and Yung T.H. Moving force identification studies I: theory. Journal of Sound and Vibration 247 1 (2001) 59-76
37. Yu L., and Chan T.H.T. Moving force identification from bending moment responses of bridge. Structural Engineering and Mechanics 14 2 (2002) 151-170
38. Tikhonov A.N., and Arsenin V.Y. Solution of Ill-posed Problems (1977), Wiley, New York
39. Law S.S., Chan T.H.T., Zhu X.Q., and Zeng Q.H. Regularization in moving force identification. Journal of Engineering Mechanics, ASCE 127 2 (2001) 136-148
40. Busby H.R., and Trujillo D.M. Optimal regularization of an inverse dynamics problem. Computers and Structures 63 2 (1997) 243-248
41. Hansen P.C. Analysis of discrete ill-posed problems by means of the L-curve. SIAM Review 34 4 (1992) 561-580
42. Chan T.H.T., and Yung T.H. A theoretical study of force identification using prestressed concrete bridge. Engineering Structures 23 (2000) 529-1537
43. Harris H.G., and Sabnis G.M. Structural Modeling and Experimental Techniques (2000), CRC Press, New York
44. Wang R.T., and Sang Y.L. Out-of-plane vibration of multi-span curved beam due to moving loads. Structural Engineering and Mechanics 7 4 (1999) 361-375
45. Khaleel M.A., and Itani R.Y. Live-load moments for continuous skew bridges. Journal of Structural Engineering, ASCE 116 9 (1990) 2361-2373
46. Jiang R.J., Au F.T.K., and Cheung Y.K. Identification of masses moving on multi-span beams based on a genetic algorithm. Computers and Structures 81 (2003) 2137-2148
47. Au F.T.K., Jiang R.J., and Cheung Y.K. Parameter identification of vehicles moving on continuous bridges. Journal of Sound and Vibration 269 (2004) 91-111
48. Vogel C.R., and Wade J.G. Iterative SVD-based methods for ill-posed problems. SIAM Journal on Scientific Computing 15 (1994) 736-754
49. Bazan F.S.V., and Bavaseri C.A. An optimized pseudo-inverse algorithm (OPIA) for multi-input multi-output modal parameter identification. Mechanical Systems and Signal Processing 10 4 (1996) 365-380
50. Zhong W.X., and Williams F.W. A precise time step integration method. Proceedings of Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 208 (1994) 427-430
51. Zhu X.Q., and Law S.S. Practical aspects in moving force identification. Journal of Sound and Vibration 258 1 (2002) 123-146
52. Mitsuhata Y. Adjustment of regularization in ill-posed linear inverse problems by the empirical Bayes approach. Geophysical Prospecting 52 (2004) 213-239
53. Watzenig D., Brandstatter B., and Holler G. Adaptive regularization parameter adjustment for reconstruction problems. IEEE Transactions on Magnetics 40 2 (2004) 1116-1119
54. Chu L.C., Qu N.S., and Wu R.F. A forward method for dynamic load identification in time domain. Chinese Journal of Applied Mechanics 11 2 (1994) 9-18
55. Nordstrom L.J.L., and Nordberg T.P. A time delay method to solve non-collocated input estimation problems. Mechanical Systems and Signal Processing 18 (2004) 1469-1483
56. T.H.T. Chan, T.H. Yung, Identification of bridge-friendly vehicles from different vehicle frames, Proceedings of the International Conference on Advances in Structural Engineering, Hong Kong, 13-15 December 2000, pp. 577-584.