-
3
-
-
34249902542
-
-
3D, Valencia, California
-
3D Systems web page, 2004, 3D Systems - Valencia, California, http://www.3dsystems.com
-
(2004)
3D Systems
-
-
web page, S.1
-
4
-
-
34249909533
-
-
The Synterstation systems. Guide to materials: CastForm PS, DTM Corporation, April 1999.
-
The Synterstation systems. Guide to materials: CastForm PS, DTM Corporation, April 1999.
-
-
-
-
5
-
-
34249886048
-
-
SLS® selective laser sintering technology for investment, DTM white paper, DTM Corporation, 1999.
-
SLS® selective laser sintering technology for investment, DTM white paper, DTM Corporation, 1999.
-
-
-
-
6
-
-
0027929725
-
Linear accuracies from layer manufacturing
-
Childs, T. H. C. and Juster, N. P. Linear accuracies from layer manufacturing. Ann. CIRP, 1994, 43(1), 163-167.
-
(1994)
Ann. CIRP
, vol.43
, Issue.1
, pp. 163-167
-
-
Childs, T.H.C.1
Juster, N.P.2
-
7
-
-
0029231059
-
Benchmarking of rapid prototyping techniques in terms of dimentional accuracy and surface finish
-
Ippolito, R., Luliano, L., and Gatto, A. Benchmarking of rapid prototyping techniques in terms of dimentional accuracy and surface finish. Ann. CIRP, 1995, 44(1), 157-160.
-
(1995)
Ann. CIRP
, vol.44
, Issue.1
, pp. 157-160
-
-
Ippolito, R.1
Luliano, L.2
Gatto, A.3
-
8
-
-
0026391429
-
Material ingress manufacturing by rapid prototyping technologies
-
Kruth, J. P. Material ingress manufacturing by rapid prototyping technologies. Ann. CIRP, 1991, 40(2), 603-614.
-
(1991)
Ann. CIRP
, vol.40
, Issue.2
, pp. 603-614
-
-
Kruth, J.P.1
-
9
-
-
0029504675
-
Conversion of RP models to investment castings
-
Dickens, P. M., Stangroom, R., Greul, M., Holmer, B., Hovtun, R., Neumann, R., Noeken, S., and Wimpenny, D. Conversion of RP models to investment castings. Rapid Prototyping J., 1995, 1(4), 4-11.
-
(1995)
Rapid Prototyping J
, vol.1
, Issue.4
, pp. 4-11
-
-
Dickens, P.M.1
Stangroom, R.2
Greul, M.3
Holmer, B.4
Hovtun, R.5
Neumann, R.6
Noeken, S.7
Wimpenny, D.8
-
10
-
-
13744258228
-
Rapid prototyping and tooling techniques: A review of applications for rapid investment casting
-
February
-
Cheah, C. M., Chua., C. K., Lee, C. W., Feng, C., and Totong, K. Rapid prototyping and tooling techniques: a review of applications for rapid investment casting. Int. J. Advd Mfg Technol., UK, February 2005, 25(3-4), 308-320.
-
(2005)
Int. J. Advd Mfg Technol., UK
, vol.25
, Issue.3-4
, pp. 308-320
-
-
Cheah, C.M.1
Chua, C.K.2
Lee, C.W.3
Feng, C.4
Totong, K.5
-
11
-
-
0842267360
-
Rapid investment casting: Direct and indirect approaches via fused deposition modeling
-
January
-
Lee, C. W., Chua, C. K., Cheah, C. M., Tan, L. H., and Feng, C. Rapid investment casting: direct and indirect approaches via fused deposition modeling. Int. J. Advd Mfg Technol., UK, January 2004, 23(1-2), 93-101.
-
(2004)
Int. J. Advd Mfg Technol., UK
, vol.23
, Issue.1-2
, pp. 93-101
-
-
Lee, C.W.1
Chua, C.K.2
Cheah, C.M.3
Tan, L.H.4
Feng, C.5
-
12
-
-
11144265690
-
Rapid investment casting: Direct and indirect approaches via Model Maker II
-
January
-
Chua, C. K., Feng, C., Lee, C. W., and Ang, G. C. Rapid investment casting: direct and indirect approaches via Model Maker II. Int. J. Advd Mfg Technol., UK, January 2005, 25, 26-32.
-
(2005)
Int. J. Advd Mfg Technol., UK
, vol.25
, pp. 26-32
-
-
Chua, C.K.1
Feng, C.2
Lee, C.W.3
Ang, G.C.4
-
13
-
-
19044400967
-
Selective laser sintering: Applications and technological capabilities
-
Pham, D. T., Dimov, S. S., and Lacan, F. Selective laser sintering: applications and technological capabilities. Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture, 1999, 213, 435-449.
-
(1999)
Proc. Instn Mech. Engrs, Part B: J. Engineering Manufacture
, vol.213
, pp. 435-449
-
-
Pham, D.T.1
Dimov, S.S.2
Lacan, F.3
-
14
-
-
34249885101
-
-
Shellabear, M. Benchmark study of accuracy and surface quality in RP models, Task 4.2, Report 2, BRITE/ EURAM Project BE-2051, Process Chains for Rapid Technical Prototypes (RAPTEC), 1999.
-
Shellabear, M. Benchmark study of accuracy and surface quality in RP models, Task 4.2, Report 2, BRITE/ EURAM Project BE-2051, Process Chains for Rapid Technical Prototypes (RAPTEC), 1999.
-
-
-
-
15
-
-
33745096431
-
Compensation of non-linear shrinkage of polymer materials in selective laser sintering
-
Austin, Texas
-
Manetsberger, K., Shen, J., and Muellers, J. Compensation of non-linear shrinkage of polymer materials in selective laser sintering. Solid Freeform Fabrication Symposium Proceedings, Austin, Texas, 2001, pp. 346-356.
-
(2001)
Solid Freeform Fabrication Symposium Proceedings
, pp. 346-356
-
-
Manetsberger, K.1
Shen, J.2
Muellers, J.3
-
16
-
-
9744224820
-
Inhomogenous shrinkage of polymer materials in selective laser sintering
-
Austin, Texas
-
Shen, J., Steinberger, J., Gopfert, J., Gerner, R., Daiber, F., Manetsberger, K., and Fetstl, S. Inhomogenous shrinkage of polymer materials in selective laser sintering. Solid Freeform Fabrication Symposium Proceedings, Austin, Texas, 2000, pp. 298-305.
-
(2000)
Solid Freeform Fabrication Symposium Proceedings
, pp. 298-305
-
-
Shen, J.1
Steinberger, J.2
Gopfert, J.3
Gerner, R.4
Daiber, F.5
Manetsberger, K.6
Fetstl, S.7
-
17
-
-
0037279916
-
Rapid prototyping and rapid tooling - the key enablers for rapid manufacturing
-
Pham, D. T. and Dimov, S. S. Rapid prototyping and rapid tooling - the key enablers for rapid manufacturing. Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science, 2003, 217, 1-23.
-
(2003)
Proc. Instn Mech. Engrs, Part C: J. Mechanical Engineering Science
, vol.217
, pp. 1-23
-
-
Pham, D.T.1
Dimov, S.S.2
-
18
-
-
33745086539
-
Rapid manufacturing of patterns for investment casting: Improvement of quality and success rate
-
Dotchev, K. and Soe, S. Rapid manufacturing of patterns for investment casting: improvement of quality and success rate. Rapid Prototyping J., 2006, 12(3), 156-164.
-
(2006)
Rapid Prototyping J
, vol.12
, Issue.3
, pp. 156-164
-
-
Dotchev, K.1
Soe, S.2
-
19
-
-
34249864550
-
-
SLS - selective laser sintering, DTM Corporation, Austin, Texas, 2001.
-
SLS - selective laser sintering, DTM Corporation, Austin, Texas, 2001.
-
-
-
-
21
-
-
34249902072
-
-
The Synterstation systems. Guide to materials: DuraForm polyamide, DTM Corporation, December 1997.
-
The Synterstation systems. Guide to materials: DuraForm polyamide, DTM Corporation, December 1997.
-
-
-
-
22
-
-
0032671979
-
Calibration of shrinkage and beam offset in SLS process
-
Wang, X. Calibration of shrinkage and beam offset in SLS process. Rapid Prototyping J., 1999, 5(3), 133.
-
(1999)
Rapid Prototyping J
, vol.5
, Issue.3
, pp. 133
-
-
Wang, X.1
|