Some factors affecting geosynthetics used for GeoEnvironmental applications

5th ICEG Environmental Geotechnics: Opportunities, Challenges and Responsibilities for Environmental Geotechnics - Proceedings of the ISSMGE 5th Int. Congress

Volumn I, Issue , 2006, Pages 43-69

  Rowe, R Kerry ^a  

^a QUEEN S UNIVERSITY   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

EROSION; GEOSYNTHETIC MATERIALS; HYDROCARBONS; LEACHATE TREATMENT; VOLATILE ORGANIC COMPOUNDS;

GEOSYNTHETIC CLAY LINERS; SUSCEPTIBILITY; THAW CYCLES;

ENVIRONMENTAL ENGINEERING;

EID: 34249071108     PISSN: None     EISSN: None     Source Type: Conference Proceeding    
DOI: None     Document Type: Conference Paper

References (89)

1. Abollino, O., Aceto, M., Malandrino, M., Sarzanini, C., and Mentasti, E. 2003. "Adsorption of HMs on Na-montmorillonite". Water Res., 37: 1619-1627.
2. Ashmawy, A., El-Hajji, D., Sotelo, N., and Muhammad, N. (2002), "Hydraulic performance of untreated and polymer-treated bentonite in inorganic landfill leachates." Clays Clay Miner., 50(5): 545-551.
3. ASTM D6496. Standard test method for determining average bonding peel strength between the top and bottom layers of needle-punched geosynthetic clay liners. Annual Book of ASTM Standards 2003 Vol. 04.13 pp. 335-337.
4. Basnett, C.R. and Bruner, R.J. (1993) Clay desiccation of a single-composite liner system, Geosynthetlcs 93, Vancouver, IF AI, St. Paul, MM, 1329-1340.
5. Bathurst, R.J., Rowe, R.K., Zeeb, B. and Reimer, K. (2006) "A geocomposite barrier for hydrocarbon containment in the Arctic", International Journal of Geoengineering Case Histories, 1(1): 18-34.
6. Brain, E. S., (2000). "Evaluation of leachate compatibility to clay soil for three geosynthetic clay liner products", Geotechnical Special Publication, 103, GeoDenver 2000 Congress 'Advances in Transportation and Geoenvironmental Systems Using Geosynthetics', Denver, CO, USA, 117-128.
7. Brown, K. W., Green, J. W. and Thomas, J. C. (1983). "The influence of selected organic liquids on the permeability of clay liners", Proc. of Land Disposal of Hazardous Waste 9th annual research symposium, pp 114-125.
8. Brown, K. W., Thomas, J. C. and Green, J. W. (1984). "Permeability of compacted soils to solvents mixtures and petroleum products", Proc. of Land Disposal of Hazardous Waste 10th annual research symposium, pp 124-137.
9. Cartaud, F. Touze-Foltz, N. and Duval, Y. (2005a) Experimental investigation of the influence of a geotextile beneath the geomembrane in a composite liner on leakage through a hole in the geomembrane, Geotextiles and Geomembranes, 23(2):117-143.
10. Cooper, C., Jiang, J.Q., Ouki, S. (2002) "Preliminary evaluation of polymeric Fe and Al modified clays as adsorbents for Heavy Metal removal in water treatment". J. Chem, Tech. Biotechnol. Vol. 77, pp. 546-551
11. Corser, P., Pellicer, J. and Cranston, M. (1992) Observations on long-term performance of composite clay liners and covers, Geotech. Fabrics Report, Nov.: 6-16.
12. Daniel, D.E., Shan, H.Y. and Anderson, J.D. (1993) "Effects of partial wetting on the performance of the bentonite component of a Geosynthetic Clay Liner", Proceedings of Geosynthetics '93, Industrial Fabrics Association International, St. Paul, Minn., 3, pp. 1483-1496.
13. Dobras, T.N. and Elzea, J.M. (1993) "In-situ soda ash treatment for contaminated Geosynthetic Clay Liners", Proceedings of Geosynthetics '93, Industrial Fabrics Association International, St. Paul, MN, R.J. Bathurst, Ed., pp. 1145-1160.
14. Döll, P., (1997) Desiccation of Mineral Liners Below Landfills with Heat Generation, ASCE J. Geotech. Geoenv. Eng., 123(11): 1001-1009.
15. Fernandez, F. and Quigley, R. M. (1985) "Hydraulic conductivity of natural clays permeated with simple liquid hydrocarbons", Can. Geotech. J. 22, 205-214.
16. Felon, R., Wilson, P.E. and Janssens, J. (1992) Résistance Mécanique des Membranes d'Étanchéité. Membranes Armées en Théorie et en Pratique, in Vade Mecum Pour la Réalisation des Systèmes d'Étanchéité Drainage Artificiels Pour les Sites d'Enfouissement Technique en Wallonie. Journées d'Études ULg 92.
17. Fox P.J., Rowland, M.G., Scheithe J.R. (1998). Internal shear strength of three geosynthetic clay liners. Journal of Geotechnical and Geoenvironmental Engineering 124(10): 933-944.
18. Guyonnet, D., Gaucher, E., Gaboriau, H., Pons, C., Clinard, C., Norotte, V., and Didier, G., (2005). "Geosynthetic Clay Liner Interaction with Leachate: Correlation between Permeability, Microstructure, and Surface Chemistry", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(6), 740-749.
19. Giroud, J.P. (1997) Equations for calculating the rate of liquid migration through composite liners due to geomembrane defects, Geosynthetics Int. 4 (3-4), 335-348.
20. Giroud, J.P. and Bonaparte, R.(1989) Leakage through liners constructed with geomembranes - Part II. Composite liners, Geotextiles and Geomembranes, 8 (2): 71-111.
21. Giroud, J-P & Soderman, K.L. (2000) "Criterion for Acceptable Bentonite Loss From a GCL Incorporated into a Liner System", Geosynthetics International, 7(4-6): 529-581.
22. Harpur, W.A., Wilson-Fahmy, R.F. and Koerner, R.M. (1993) Evaluation of the contact between geosynthetic clay liners and geomembranes in terms of transmissivity, GRI Seminar on Geosynthetic Liner Systems, Philadelphia, PA, IFAI: 143-154.
23. th Int. Landfill Symp., Cagliari, 3:101-113.
24. Heerten, G., Saathoff F., Scheu C., von Maubeuge K. P. (1995). Testing, interpreting and designing the long-term shear strength of geosynthetic clay liners, Proc., of Geosynthetics '95 Nashville, Tennessee, USA. pp. 867-877.
25. Hewitt, R.D. and Daniel, D.'E. (1997) "Hydraulic Conductivity of Geosynthetic Clay Liners after Freeze-Thaw," Journal of Geotechnical and Geoenvironmental Engineering, 123(4): 305-313.
26. Hsuan Y.G. and Koerner R.M. (1998). Antioxidant depletion lifetime in high density polyethylene geomembranes, ASCE J. Geotech. Geoenv. Eng., 124(6): 532-541.
27. Huang, C.H., Wu, C.K., Sun, P.C. (1999) "Removal of heavy metals from plating wastewater by crystallization/precipitation of gypsum". J. Chin. Chem. Soc. 46 (4): 633-638.
28. Hurst, P and Rowe, R.K. (2006)" Average Bonding Peel Strength of Geosynthetic Clay Liners Exposed to Jet Fuel A-1", Geotextiles and Geomembranes, 24 (1):58-63.
29. Jayawickrama, P., Brown, K.W., Thomas, J.C. and Lytton, R.L. (1988) "Leakage Rates Through Flaws in Membrane Liners", ASCE J. Env. Eng., 114(6):1401-1419.
30. Jo, H.-Y., Benson, C. H., Shackelford, C. D., Lee, J.-M. and Edil, T. B. (2005). "Long-term hydraulic conductivity of a geosynthetic clay liner (GCL) permeated with inorganic salt solutions", Journal of Geotechntcal and Geoenvironmental Engineering, 131(4): 405-417.
31. th ICSMGE, Osaka, Japan, 2285-2288.
32. Kodikara, J. K., Rahman, F. and Barbour, S. L. (2002). "Towards a more rational approach to chemical compatibility testing of clay", Canadian Geotechnical Journal, 39: 597-607.
33. Kolstad, D.C., Benson, C.H., and Edil, T.B. (2004). Hydraulic conductivity and swell of nonprehydrated geosynthetic clay liners permeated with multispecies inorganic solutions, Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 130(12): 1236-1249.
34. Kraus, F. J., Benson, H. C., Erickson, E. A., and Chamberlain, J. E. (1997) "Freeze - Thaw Cycling and Hydraulic Conductivity of Bentonite Barriers," Journal of Geotechnical and Geoenvironmental Engineering, 123(3): 229-238.
35. Lake, C.B. and Rowe, R.K. (2000a). "Swelling Characteristics of Needlepunched, Thermally Treated GCLs" Geotextiles and Geomembranes, 18(2):77-102.
36. Lake, C.B. and Rowe, R.K. (2000b). "Diffusion of Sodium and Chloride Through Geosynthetic Clay Liners" Geotextiles and Geomembranes, 18(2):102-132.
37. Lee, J.-M. and Shackelford, C. D. (2005). "Impact of bentonite quality on hydraulic conductivity of geosynthetic clay liners", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 131(1), 64-77.
38. Legge, K.R. and Davies, P.L. (2002) an appraisal of the performance of geosynthetics material used in waste disposal facilities in South Africa, WasteCon 2002, Durban, SA, CD 12p.
39. Li, L.Y., and Li, F. (2001) "Heavy metal sorption and hydraulic conductivity studies using three types of bentonite admixes". Journal of Environmental Engineering, 127: 420-429.
40. Lo, I.M.C. and Yang, X. (2001). "Use of organoclay as secondary containment for gasoline storage tanks", J. Environ. Eng., 127(2): 154-161.
41. Mackey, R. E., von Maubeuge, K. P. (1999). Peel testing of needle-punched geosynthetic clay liners' test procedure, interpretation, and test results. Proc., of Geosynthetics '99 Boston, Massachusetts, USA pp. 195-207.
42. McKelvey, J.A. (1997) "Geosynthetic Clay Liners in alkaline environments". Testing and Acceptance Criteria for GCLs, ASTM STP 1308, Larry W. Well, Ed., pp. 139-149.
43. Mueller, W. and Jacob, I. (2003) Oxidative resistance of HDPE, Polymer Degradation and Stability, 79: 161-172.
44. nd European Geosynthetics Conf., Bologna, Italy: 557-560.
45. Olsen, H. W. (1961). "Hydraulic flow through saturated clays." D.Sc. thesis, Massachusetts Institute of Technology, Cambridge, Mass.
46. Olsta, J., and Crosson K. (1999). Geosynthetic clay liner peel index test correlation to direct shear. Proc., Sardinia 99, Seventh International Waste Management and Landfill Symposium. S. Margherita di Pula, Italy pp. 97-202.
47. Osawa Z. and Saito T. (1978) The effects of transition metal compounds on the thermal oxidative degradation of polypropylene in solution, In Stabilisation and Degradation of Polymers, Advances in Chemistry, Series 169, Am. Chem. Soc., 2897-2907.
48. th GRI Conf.: Field Performance of Geosynthetics and Geosynthetic Related Systems. Drexel University: Philidelphia, PA, 110-137.
49. Pelte, T., Pierson, P. and Gourc, J.P.(1994) Thermal analysis of geomembranes exposed to solar radiation, Geosynthetics Int., 1(1): 21-44.
50. Petrov, R.J. and Rowe, R.K. (1997). "Geosynthetic clay liner compatibility by hydraulic conductivity testing: Factors impacting performance," Canadian Geotechnical Journal Vol. 34, No. 6, pp 863-885.
51. Petrov, R.J. Rowe, R.K. and Quigley, R.M. (1997). "Selected factors influencing GCL hydraulic conductivity," ASCE Journal of Geotechnical and Geoenvironmental Engineering, Vol. 123, No. 8, pp. 683-695.
52. Richardson, G. N. (1997) GCL internal shear strength requirements. Geotechnical Fabrics Report, Industrial Fabrics Association. 15 No. 2, 20-25
53. Rowe, R.K. (1998). "Geosynthetics and the minimization of contaminant migration through barrier systems beneath solid waste," Keynote Lecture, Proceedings of the Sixth International Conference on Geosynthetics, Atlanta, March, Vol. 1, pp. 27-103, Industrial Fabrics Association International, St.Paul. MN.
54. Rowe, R.K. and Booker, J.R. (2000) Theoretical solutions for calculating leakage through composite liner systems, in Developments in Theoretical Geomechanics - The John Booker memorial Symp., Sydney, November: 580-602.
55. Rowe, R.K., and Orsini, C. (2003) "Effect of GCL and subgrade type on internal erosion in GCLs" Geotextiles and Geomembrane, 21 (1): 1-24.
56. Rowe, R.K., Mukunoki, T., Li, H.M. and Bathurst R.J. (2004) "Effect of freeze-thaw on the permeation of arctic diesel through a GCL", Journal of ASTM International, 1(2) Online; Available: www.astm.org; 1 February 2004, 10p. This was also published by ASTM in hardcopy in "Advances in Geosynthetic Clay Liner Technology" Mackey, R.E. and von Maubeuge, K. (Eds), pp 134-146.
57. Rowe, R.K., Quigley, R.M., Brachman, R.W.I., Booker, J.R. (2004) Barrier Systems for Waste Disposal Facilities, Taylor & Francis Books Ltd (E & FN Spon) London, 587p
58. Rowe, R.K., Hurst, P. and Mukunoki, T. (2005a) "Permeating Partially Hydrated GCLs with Jet Fuel at Temperatures from -20°C and 20°C", Geosynthetics International, 12(6): 333-343.
59. Rowe, R.K., Mukunoki, T., and Sangam, P.H. (2005b) "BTEX diffusion and sorption for a geosynthetic clay liner at two temperatures", ASCE Journal of Geotechnical and Geoenvironmental Engineering, 131 (10): 1211-1221.
60. Rowe, R.K., Mukunoki, T., Bathurst, R.J., Rimal, S., Hurst, P. and Hansen, S. (2005c) "The performance of a composite liner for retaining hydrocarbons under extreme environmental conditions", Geofrontiers 2005, Austin, Texas, USA, 24-26 January 2005, 17 p.
61. Rowe, R.K, Mukunoki, T., and Bathurst, R.J. (2006) "Compatibility with Jet A-1 of a GCL subjected to freeze-thaw cycles", GeoEngineering Centre at Queen's-RMC Research Report 2006-1.
62. Rowe, R.K, Mukunoki, T., Bathurst, R.J., Rimal, S., Hurst, P. and Hansen, S.. (2006) "Performance of a Geocomposite Liner for Containing Jet A-1 Spill in an Extreme Environment", GeoEngineering Centre at Queen's-RMC Research Report 2006-2
63. Ruhl, J.L. and Daniel, D.E. (1997) "Geosynthetic Clay Liners permeated with chemical solutions and leachates", Journal of Geotechnical and Geoenvironmental Engineering, ASCE, 123(4), pp. 369-380.
64. Sangam, H.P. and Rowe, R.K. (2001) "Migration of dilute aqueous organic pollutants through HDPE geomembranes", Geotextiles and Geomembranes, 19(6): 329-357.
65. Sangam, H.P. and Rowe, R.K. (2005) "Effect of surface fluorination on diffusion through an HDPE geomembrane", ASCE Journal of Geotechnical and Geoenvironmental Engineering, 131(6): 694-704.
66. Schubert, W.R. (1987) "Bentonite matting in composite lining systems", Geotechnical Practice for Waste Disposal '87, R.D. Woods, ed., ASCE, New York, NY, pp. 784-796
67. Shan, H.Y. and Daniel, D.E. (1991) "Results of Laboratory Tests on a geotextile/ bentonite liner material", Proceeding of Geosynthetics '91, Industrial Fabrics Association International, St. Paul, MN, 2, 517-535.
68. th Int. Conf. on Geosynthetics, Atlanta,IFAI, St.Paul, MN: 301-306.
69. Southen, J. M. (2005) Thermally driven moisture movement within and beneath geosynthetic clay liner, PhD Thesis, University of Western Ontario
70. Southen, J. M. and Rowe, R. K. (2004) Investigation of the behavior of geosynthetic clay liners subjected to thermal gradients in basal liner applications, J. of ASTM International, 1(2) ID JAI11470, Online; Available: www.astm.org; 13p.
71. Also ASTM: Advances in Geosynthetic Clay Liner Technology Mackey, R.E. and von Maubeuge, K. (Eds), 121-133.
72. Southen, J. M. and Rowe, R. K. (2005a) Modeling of thermally induced desiccation of geosynthetic clay liners, Geotextiles and Geomembranes, 23 (5): 425-442.
73. Southen, J. M. and Rowe, R. K. (2005b) Laboratory investigation of GCL desiccation in a composite liner subjected to thermal gradients, ASCE J. Geotech. Geoenv. Eng., 131(7): 925-935.
74. Shan, H. -Y., Daniel, D.E. (1994). Slope stability of final covers containing geosynthetic clay liners. Fifth International Conference on Geotextiles, Geomembranes and Related Products. Singapore
75. Shan, H., and Lai, Y. (2002). "Effect of hydrating liquid on the hydraulic properties of geosynthetic clay liners." Geotextile and Geomembranes, 20: 19-38.
76. th GRI Conference, Las Vegas, Nevada, 242-254.
77. Shaner, K.R. and Menoff, S.D. (1992) Impacts of bentonite geocomposites on geonet drainage, Geotextiles and Geomembranes, 11(4-6):503-512.
78. th International Conf. on Acid Rock Drainage, Volume 1.
79. Stone, J.L. (1984) Leakage monitoring of the geomembrane for proton decay experiment, Int. Conf. on Geomembranes, Denver, USA, 2: 475-480.
80. Thiel, R. and Richardson, G. N. (2005) Concern for GCL Shrinkage when installed on slopes, ASCE GeoFrontiers C Austin, CD-ROM, Paper GRI-18, 7p.
81. Touze-Foltz, N., Rowe, R.K. and Duquennoi, C., (1999) "Liquid flow through composite liners due to geomembrane defects: analytical solutions for axi-symmetric and two-dimensional problems", Geosynthetics Int., 6(6):455-479 (Erratum: 2000, 7(1):77).
82. Touze-Foltz, N., Schmittbuhl, J., and Memier, M. (2001a) Geometric and spatial parameters of geomembrane wrinkles on large scale model tests, Geosynthetics 2001, Portland, USA: 715-728.
83. Touze-Foltz, N., Rowe, R.K. and Navarro, N. (2001b) "Liquid flow through composite liners due to geomembrane defects: nonuniform hydraulic transmissivity at the liner interface", Geosynthetics Int., 8(1), 1-26.
84. Viebke J. Elble E., Ifwarson M. and Gedde U.W. (1994) Degradation of unstabilized medium-density polyethylene pipes in hot-water applications, Polymer Eng. and Science, 34(17): 1354-1361.
85. nd Int. Conf. on Geotextiles, Las Vegas, 1: 283-288.
86. Wiggert, D.C., Andersland, O. B., Davies, S. H. (1997). Movement of liquid contaminants in partially saturated frozen granular soils. Cold Regions Science and Technology, 25, 111-117.
87. Yong, R. N. 2001. Geo-environmental Engineering, 1st Edition, CRC Press LLC, USA.
88. Zhou, Y. and Rowe, R. K. (2003) Development of a technique for modelling clay liner desiccation, Int. J. for Numerical and Analytical Methods in Geomechanics, 27: 473-493.
89. Zhou, Y. and. Rowe, R.K. (2005) "Modelling of Clay Liner Desiccation" ASCE Journal of Gemechanics, 5 (1):1-9.