EHL modeling for nonhomogeneous materials: The effect of material inclusions

Journal of Tribology

Volumn 129, Issue 2, 2007, Pages 256-273

  Slack, Trevor S ^a   Raje, Nihar ^a   Sadeghi, Farshid ^a   Doll, Gary ^b   Hoeprich, Michael R ^b  

^a PURDUE UNIVERSITY   (United States)

^b Timken Technology Center   (United States)

Author keywords

Contact stresses; Discrete element method; Elastohydrodynamic lubrication; Inclusions

Indexed keywords

ELASTICITY; ELASTOHYDRODYNAMIC LUBRICATION; FATIGUE CRACK PROPAGATION; FILM THICKNESS; FINITE DIFFERENCE METHOD; INCLUSIONS; MATHEMATICAL MODELS; PRESSURE DISTRIBUTION; STRESS CONCENTRATION;

CONTACT STRESSES; ROLLING ELEMENT BEARINGS;

BEARINGS (MACHINE PARTS);

BEARINGS (MACHINE PARTS); ELASTICITY; ELASTOHYDRODYNAMIC LUBRICATION; FATIGUE CRACK PROPAGATION; FILM THICKNESS; FINITE DIFFERENCE METHOD; INCLUSIONS; MATHEMATICAL MODELS; PRESSURE DISTRIBUTION; STRESS CONCENTRATION;

EID: 34249070072     PISSN: 07424787     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2540234     Document Type: Article

References (24)

1. Nishioka, K., 1957, "On the Effect of Inclusion Upon the Fatigue Strength," J. Soc. Mater. Sci. Jpn., 6, pp. 382-385.
2. Murakami, Y., Kodama, S., and Konuma, S., 1989, "Quantitative Evaluation of Effects of Non-Metallic Inclusions on Fatigue Strength of High Strength Steels. I: Basic Fatigue Mechanism and Evaluation of Correlation between the Fatigue Fracture Stress and the Size and Location of Non-Metallic Inclusions," Int. J. Fatigue, 11(5), pp. 291-298.
3. Bohmer, H. J., 1993, "A New Approach to Determine the Effect of Nonmetallic Inclusions on Material Behavior in Rolling Contact," Creative Use of Bearing Steels, 9ASTM STP 1195, J. J. C. Hoo, ed., American Society for Testing and Materials, Philadelphia, pp. 211-221.
4. Martin, J. A., Borgese, S. F., and Eberhardt, A. D., 1966, "Microstructural Alterations of Rolling-bearing Steel Undergoing Cyclic Stressing," ASME J. Basic Eng., 88, pp. 555-567.
5. O'Brien, J. L., and King, A. H., 1966, "Electron Microscopy of Stress-Induced Structural Alterations near Inclusions in Bearing Steels," ASME J. Basic Eng., 88, pp. 568-572.
6. Kinoshi, K. M., 1974, "Effect of Nonmetallic Inclusions on Rolling Contact Fatigue Life in Bearing Steels," Bearing Steels: Rating Nonmetallic Inclusions Symposium, ASTM STP, 575, pp. 138-149.
7. Freitas, M., and Francois, D., 1983, "Initiation of Fatigue Cracks Around Inclusions in Rolling Fatigue," Elastic-Plastic Fracture: Second Symposium, Volume II - Fracture Resistance Curves and Engineering Applications, ASTM STP, 803, C. F. Shih, and J. P. Gudas, eds., American Society for Testing and Materials, pp. 796-807.
8. Chen, Q., Shao, E., Zhao, D., Guo, J., and Fan, Z., 1991, "Measurement of the Critical Size of Inclusions Initiating Contact Fatigue Cracks and its Application in Bearing Steel," Wear, 147, pp. 285-294.
9. Melander, A., 1997, "A Finite Element Study of Short Cracks with Different Inclusion Types under Rolling Contact Fatigue Load," Int. J. Fatigue, 19, pp. 13-24.
10. Kabo, E., 2002, "Material Defects in Rolling Contact Fatigue - Influence of Overloads and Defect Clusters," Int. J. Fatigue, 24, pp. 887-894.
11. Courbon, J., Lormand, G., Dudragne, G., Daguier, P., and Vincent, A., 2003, "Influence of Inclusion Pairs, Clusters and Stringers on the Lower Bound of the Endurance Limit of Bearing Steels," Tribol. Int., 36, pp. 921-928.
12. Moschovidis, Z. A., 1975, "Two Ellipsoidal Inhomogeneities and Related Problems Treated by the Equivalent Inclusion Method," Ph.D. thesis, Northwestern University, Evanston, IL.
13. Raje, N., Sadeghi, F., Rateick, Jr., R. G., and Hoeprich, M. R., 2007 "Evaluation of Stresses around Inclusions in Hertzian Contacts using the Discrete Element Method," ASME J. Tribol., 129, to be published.
14. Sadeghi, F., and Sui, P. C., 1990, "Thermal Elastohydrodynamic Lubrication of Rolling/Sliding Contacts," ASME J. Tribol., 112(2), pp. 189-195.
15. Hopkins, M. A., 1992, "The Numerical Simulation of Systems of Multitudinous Polygonal Blocks," US Army Cold Regions Research and Engineering Laboratory, USACRREL Report CR 99-22.
16. Raje, N., Sadeghi, F., and Rateick, Jr., R. G., 2007, "A Discrete Element Approach to Evaluate Stresses due to Line Loading on an Elastic Half-space," Comput. Mech., DOI 10.1007/s00466-006-0120-3, in press.
17. Cundall, P. A., and Hart, R. D., 1992, "Numerical Modeling of Discontinua," Eng. Comput., 9, pp. 101-113.
18. Cundall, P A., and Strack, O. D. L., 1979, "A Discrete Numerical Model for Granular Assemblages," Geotechnique, 29, pp. 47-65.
19. Kun, F., D'Addetta, G. A., Herrmann, H. J., and Ramm, E., 1999, "Two-Dimensional Dynamic Simulation of Fracture and Fragmentation of Solids," Comp. Assist. Mech. Eng. Sc., 6, pp. 385-402.
20. Potapov, A. V., Campbell, C. S., and Hopkins, M. A., 1995, "A Two-Dimensional Dynamic Simulation of Solid Fracture Part I: Description of the Model," Int. J. Mod. Phys. C, 6(3), pp. 371-398.
21. Potapov, A. V., Campbell, C. S., and Hopkins, M. A., 1995, "A Two-Dimensional Dynamic Simulation of Solid Fracture Part II: Examples," Int. J. Mod. Phys. C, 6(3), pp. 399-425.
22. Hopkins, M. A., 2004, "A Discrete Element Lagrangian Sea Ice Model," Eng. Comput., 21, pp. 409-421.
23. Hocking, G., 1992, "The Discrete Element Method for Analysis of Fragmentation of Discontinua," Eng. Comput., 9, pp. 145-155.
24. Preparata, F. P., and Shamos, M. I., 1985, Computational Geometry: An Introduction, Springer-Verlag, Berlin.