Polypropylene reinforced with hemp strands: Study of the influence of propylene modified with maleic anhydride as coupling agent;Polipropileno reforzado con filamentos de cáñamo: Estudio de la influencia del polipropileno modificado con anhídrido maleico como agente compatibilizante

Afinidad

Volumn 63, Issue 522, 2006, Pages 94-105

  Vallejos, M E ^a   Girones J ^a   Vilaseca, F ^a   Mendez J A ^a   Lopez A ^a   Mutje P ^a  

^a UNIVERSITY OF GIRONA   (Spain)

Author keywords

Hemp (Cannabis sativa L.); Mechanical properties; Polypropylene; Polypropylene modified with maleic anhydride

Indexed keywords

EID: 34248576529     PISSN: 00019704     EISSN: None     Source Type: Journal    
DOI: None     Document Type: Article

References (54)

1. Laurent Bouby (2002): «Le chanvre (Cannabis sativa L.): une plante cultivée à la fin de l'âge du Fer en France du Sud-Ouest?» C. R. Palevol 1(2): 89-95.
2. Sankari, H. S. (2000): «Comparison of bast fibre yield and mechanical fibre properties of hemp (Cannabis sativa L.) cultivars», Industrial Crops and Products 11(1): 73-84.
3. Linger, P.; Müssig, J; Fischer, H.; Kobert, J. (2002): «Industrial hemp (Cannabis sativa L.) growing on heavy metal contaminated soil: fibre quality and phytoremediation potential», Industrial Crops and Products 16(1): 33-42.
4. Kymäläinen, H. R.; Koivula, M.; Kuisma, R.; Sjöberg, A. M.; Pehkonen, A. (2004): «Technologically indicative properties of straw fractions of flax, linseed (Linum usitatissimum L.) and fibre hemp (Cannabis sativa L.)», Bioresource Technology 94(1): 57-63.
5. Nilsson, D.; Svennerstedt, B.; Wretfors, C. (2005): «Adsorption Equilibrium Moisture Contents of Flax Straw, Hemp Stalks and Reed Canary Grass», Biosystems Engineering, 91(1): 35-43.
6. Di Candilo, M.; Ranalli, P.; Bozzi, C.; Focher, B.; Mastromei, G. (2000): «Preliminary results of tests facing with the controlled retting of hemp», Industrial Crops and Products 11(2): 197-203.
7. Chen, Y.; Gratton, J. L.; Liu, J. (2004): «Power Requirements of Hemp Cutting and Conditioning», Biosystems Engineering 87(4): 417-424.
8. Hobson, R. N.; Hepworth, D. G.; Bruce, D. M. (2001): «Quality of Fibre Separated from Unretted Hemp Stems by Decortication», J. agric. Engng Res. 78(2): 153-158.
9. Bruce, D. M.; Hobson, R. N.; Hamer, P. J. C.; White, R. P. (2005): «Drying of Hemp for Long Fibre Production», Biosystems Engineering, 91(1): 45-59.
10. Alden, D. M.; Proops, J. L. R.; Gay, P. W. (1998): «Industrial hemp's double dividend: a study for the USA Ecological», Economics 25(3): 291-301.
11. Keller, A.; Leupin, M.; Mediavilla, V.; Wintermantel, E. (2001): «Influence of the growth stage of industrial hemp on chemical and physical properties of the fibres», Industrial Crops and Products 13(1): 35-48.
12. Vignon, M. R.; Garcia-Jaldon, C. (1996): «Structural features of the pectic polysaccharides isolated from retted hemp bast fibres», Carbohydrate Research 296(1): 249-260.
13. Prasad, B. M.; Sain, M. N.; Roy, D. N. (2004): «Structural property correlation of thermally treated hemp fiber», Macromol. Mater. Eng., 289:581-592.
14. Ouajai, S.; Shanks, R. A. (2005): «Composition, structure and thermal degradation of hemp cellulose after chemical treatments», Polymer Degradation and Stability, 89(2): 327-335.
15. Garcia-Jaldon, C.; Dupeyre, D.; Vignon, M. R. (1998): «Fibres from semi-retted hemp bundles by Steam explosion treatment», Biomass and bioenergy 14(3): 251-260.
16. Tserki, V.; Zafeiropoulos, N. E.; Simon, F.; Panayiotou, C. (2004): «A study of the effect of acetylation and propionylationsurface treatments on natural fibres», Composites A36(8): 1-9.
17. Aziz, S. H.; Ansell, M. P. (2004): «The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: Part 1 - polyester resin matrix», Composites Science and Technology 64(9): 1219-1230.
18. Aziz, S. H.; Ansell, M. P. (2004): «The effect of alkalization and fibre alignment on the mechanical and thermal properties of kenaf and hemp bast fibre composites: part 2 - cashew nut shell liquid matrix», Composites Science and Technology 64(9): 1231-1238.
19. Hepworth, D. G.; Hobson, D. M.; Bruce, J. W.; Farrent, R. N. (2000): «The use of unretted hemp fibre in composite manufacture», Composites A31(11): 1279-1283.
20. Ferreira, J. M.; Silva, H.; Costa, J. D.; Richardson, M. (2005): «Stress analysis of lap joints involving natural fibre reinforced interface layers», Composites: B36(1): 1-7.
21. Maffezzoli, A.; Calò, E.; Zurlo, S.; Mele, G.; Tarzia, A.; Stifani, C. (2004): «Cardanol based matrix biocomposites reinforced with natural fibres», Composites Science and Technology 64(6): 839-845.
22. Eichhorn, S. J.; Young, R. J. (2004): «Composite micromechanics of hemp fibres and epoxy resin microdroplets», Composites Science and Technology 64(5): 767-772.
23. Hautala, M.; Pasila, A.; Pirila, J. (2004)Ñ «Use of hemp and flax in composite manufacture: a search for new production methods», Composites A35(1) 11-16.
24. Wielage, B.; Lampke, T.; Utschick, H.; Soergel, F. (2003): «Processing of natural-fibre reinforced polymers and the resulting dynamic-mechanical properties», Journal of Materials Processing Technology 139(1-3): 140-146.
25. Mwaikamboa, L. Y.; Ansell, M. P. (2003): «Hemp fibre reinforced cashew nut shell liquid composites», Composites Science and Technology 63(9): 1297-1305.
26. Vignon, M. R.; Dupeyre, D.; Garcia-Jaldon C. (1996): «Morphological characterization of steam exploded hemp fibers and their utilization in polypropylene-based composites», Bioresource Technok. 58(2): 203-215.
27. Schäfer, T.; Honermeier, B. (2005): «Effect of sowing date and plant density on the cell morphology of hemp (Cannabis sativa L.)», Industrial Crops and Products, Artículo en prensa.
28. Rowell, R. M.; Han, J. S.; Rowell, J. S. (2000): «Characterization and factors effecting fiber properties»; Natural Polymers and Agrofibers Based Composites - São Carlos - Brazil, 115-134.
29. Karus, M.; Kaup, M.; Lohmeyer, D. (2000): «Study on markets and prices for natural fibers (Germany and EU)», http://www.nova-institut.de/ bioresource-hemp, NOVA Institute.
30. Mohanty, A. K.; Misra, M.; Drzal, L. T. (2002): «Sustainable bio-composites from renewable resources: opportunities and challenges in the green materials world»; Journal of Polymers and the Environment 10(1 y 2): 19-26.
31. Mueller, D. H.; Krobjilowski, A. (2003): «New Discovery in the Properties of Composites Reinforced with Natural Fiber»; Journal of Industrial Textiles, 33(2), 111-130.
32. Biagiotti, J.; Puglia, D.; Torre, L.; Kenny, K.; Arbelaiz, A.; Cantero, G.; Marieta, C.; Llano-Ponte, R.; Mondragón, I. (2004): «A systematic investigation on the influence of the chemical treatment of natural fibers on the properties of their polymer matrix composites», Polymer Composites, 25(5): 470-479.
33. Bismarck, A.; Aranbefwi-Askargorta, I.; Springer, J. (2002): «Surface characterization of flax, hemp and cellulose fibers; surface properties and the water uptake behaviour», Polymer Composites, 23(5): 872-894.
34. Marsal, F.; Palet, D. (2004): «Cáñamo: ¿Papel o fabricación de partes de automóviles?», III Congreso Iberoamericano de Investigación en celulosa y papel, 569-572.
35. Felix, J. M.; Gatenholm P. (1991): «The Nature of Adhesion in Composites of Modified Cellulose Fibers and Polypropylene». Journal of Applied Polymer Science, 42: 609-620.
36. Caulfield, D. F; Feng, D.; Prabawa, S.; Young, R. A.; Sanadi A. R. (1999): «Interphase effects on the mechanical and physical aspects of natural fiber composites», Die Angewandte Makromolekulare Chemie 272(1): 57-64.
37. Bledzki, A. K.; Gassan J. (1999): «Composites reinforced with cellulose based fibres», Prog. Polym. Sci. 24(2): 221-274.
38. 1 Bataille, P.; Ricard, L.; Sapieha, S. (1989: «Effects of cellulose fibers in polypropylene composites», Polym Compos, 10(2): 103-108.
39. Kazayawoko, M.; Balatinecz, J. J.; Woodhams, R. T.; J. (1997): «Diffuse reflectance fourier transform infrared spectra of wood fibers treated with maleated polypropylenes», Journal of Applied Polymer Science 66(6):1163-1173.
40. Oksman, K.; Clemons, C. J. (1998): «Mechanical Properties and Morphology of Impact Modified Polypropylene-Wood Flour Composites», Journal of Applied Polymer Science, 67: 1503-1513.
41. Anglès, M. N.; Salvadó, J.; Dufresne, A. J. (1999): «Steam exploded residual softwood filled polypropylene composites», Appl Polym Sci. 74(8): 1962-1977.
42. Amash, A.; Zugenmaier, P. (2000): «Morphology and properties of isotropic and oriented samples of cellulose fibre-polypropylene composites», Polymer, 41(4), 1589-1596.
43. Rana, A. K.; Mandal, A.; Mitra, B. C.; Jacobson, R.; Rowell, R.; Banerjee, A. (1998): «Short Jute Fiber-Reinforced Polypropylene Composites: Effect of Compatibilizer», Journal of Applied Polymer Science 69: 329-338.
44. Keener, T.J.; Stuart, R. K.; Brown, T. K. (2004): «Maleated coupling agents for natural fibre composites», Composites A(35): 357-362.
45. Klason, C., Kubat, J., Stromvall, H. E. (1984): «The efficiency of cellulosic fillers in common thermoplastics. Part 1. Filling without processing aids or coupling agents». Int J Polym Mater 10: 159-87
46. Arbelaiz, A.; Fernández, B.; Ramos, J. A.; Retegi, A.; Llano-Ponte, R.; Mondragon; I. (2005): «Mechanical properties of short flax fibre bundle/polypropylene composites: Influence of matrix/fibre modification, fibre content, water uptake and recycling», Composites Science and Technology 65: 1582-1592
47. Arbelaiz, A.; Fernández, B.; Ramos, J. A.; Retegi, A.; Llano-Ponte, R.; Mondragon, I. (2003): «Effects of fibre treatment on wettability and mechanical behaviour of flax/polypropylene composites», Composites Science and Technology 6: 1247-1254
48. Arbelaiz, A.; Fernández, B.; Ramos, J. A.; Retegi, A.; Llano-Ponte, R.; Mondragon, I. (2005): «Mechanical properties of flax fibre/polypropylene composites. Influence of fibre/matrix modification and glass fibre hybridization», Composites: A65(10): 1-8.
49. Tereyama, H. (1952): «Method of colloid titration (A new titration between ion», J. Polym. Sci. 8(2):243-253.
50. . Vilaseca, F, López, A.; Llauró, X.; Pèlach, M. A. Mutjé, P. (2004): «Hemp strands as reinforcement of polystyrene composites», Chemical Engineers Research and desing 82: 1425-1431.
51. Mutje, P.; Gironés, J.; López, A.; Llop, M. F.; Vilaseca, F.: «Hemp strands: PP composites by inyection molding: Effect of low cost physico-chemical treatments»; Journal of reinforced plastics and composites - Articulo en prensa.
52. Sanadi, Anand R.; Caurfield, Daniel F.; Jacobson, Rodney E. (1997): «Chapter 12: Agro-Fiber Thermoplastic Composites», CRC Press, 377-401.
53. Rowland, S. P.; Roberts, E. (1972): «The natura of accesible surfaces in the microstructure of cotton cellulose», J. Polym. Sci., A(10): 2447-2461.
54. Corrales, F. (2002): «Modificación de fibras de jute para la elaboración de plásticos reforzados reciclables», Tesis Doctoral, Universidad de Girona.