Symbiosis between grain boundary sliding and slip creep to obtain high-strain-rate superplasticity in aluminum alloys

Journal of the European Ceramic Society

Volumn 27, Issue 11, 2007, Pages 3385-3390

  del Valle, Jorge A ^a   Pérez Prado, M Teresa ^a   Ruano, Oscar A ^a  

^a DEPARTMENT OF PHYSICAL METALLURGY   (Spain)

Author keywords

Creep; Mechanical properties; Superplasticity

Indexed keywords

CREEP; GRAIN BOUNDARY SLIDING; MECHANICAL PROPERTIES; METALLOGRAPHIC MICROSTRUCTURE; RECRYSTALLIZATION (METALLURGY); STRAIN RATE; SUPERPLASTICITY; TEMPERATURE;

RECRYSTALLIZED MICROSTRUCTURE; SLIP CREEP;

ALUMINUM ALLOYS;

ALUMINUM ALLOYS; CREEP; GRAIN BOUNDARY SLIDING; MECHANICAL PROPERTIES; METALLOGRAPHIC MICROSTRUCTURE; RECRYSTALLIZATION (METALLURGY); STRAIN RATE; SUPERPLASTICITY; TEMPERATURE;

EID: 34248571292     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2007.02.185     Document Type: Article

References (33)

1. Ruano O.A., and Sherby O.D. On constitutive equations for various diffusion-controlled creep mechanisms. Rev. Phys. Appl. 23 (1988) 625-637
2. Nieh T.G., Wadsworth J., and Sherby O.D. Superplasticity in Metals and Ceramics (1997), Cambridge University Press, Cambridge, UK
3. Kassner M.E., and Pérez-Prado M.T. Five power law creep in metals and alloys. Prog. Mater. Sci. 45 (2000) 1-102
4. Pérez-Prado M.T., McNelley T.R., González-Doncel G., and Ruano O.A. Texture analysis of the transition from slip to grain boundary sliding in a continuously recrystallized superplastic aluminum alloy. Mater. Sci. Eng. A342 (2003) 216-230
5. Pérez-Prado M.T., Cristina M.C., and Ruano O.A. Grain boundary and crystallographic slip during superplasticity of Al-5% Ca-5% Zn as studied by texture analysis. Mater. Sci. Eng. A244 (1998) 216-223
6. Pérez-Prado M.T., Cristina M.C., Ruano O.A., and González-Doncel G. Deformation mechanisms of superplastic Al-Li 8090 alloy examined by X-ray texture measurements. Mater. Trans. JIM 41 (2000) 1562-1568
7. Pérez-Prado M.T., Cristina M.C., Ruano O.A., and González-Doncel G. Study of the deformation mechanisms of the superplastic Alloy Al-Li 2090 by texture analysis. Textures Microstruct. 34 (2000) 205-216
8. McNelley T.R., Swisher D.L., and Pérez-Prado M.T. Deformation bands and the formation of grain boundaries in a superplastic aluminum alloy. Metall. Trans. A 33 (2002) 279-290
9. Ball A., and Hutchison M.M. Superplasticity in the Al-Zn eutectoid. Mater. Sci. J. 3 (1969) 1-7
10. Ball A. Superplasticity in the aluminium-zinc eutectoid-an early model revisited. Mater. Sci. Eng. A234 (1997) 365-369
11. Matsuki K., Minami K., Tokizawa M., and Murakami Y. Superplastic behaviour in nominally single-phase and two-phase Al-Cu alloys. Met. Sci. 13 (1979) 619-626
12. Chokshi A.H., and Langdon T.G. The mechanical properties of the superplastic Al-33 Pct Cu eutectic alloy. Metall. Trans. 19A (1988) 2487-2496
13. 4Ca eutectic. J. Mater. Sci. 11 (1976) 186-189
14. Matsuki K., Morita H., Yamada M., and Murakami Y. Relative motion of grains during superplastic flow in an Al-9Zn-1 wt.% Mg alloy. Met. Sci. 11 (1977) 156-163
15. Matsuki K., Uetani Y., Yamada M., and Murakami Y. Superplasticity in an Al-6 wt.% Mg alloy. Met. Sci. 10 (1976) 235-242
16. Matsuki K., and Yamada M. Superplastic behavior of Al-Zn-Mg alloys. J. Jpn. Inst. Met. 37 (1973) 448-454
17. Wadsworth J., and Pelton A.R. Superplastic behavior of a powder-source aluminium-lithium based alloy. Scripta Metall. 18 (1984) 387-392
18. Musin F., Kaibyshev R., Motohashi Y., and Itoh G. High strain rate superplasticity in a commercial Al-Mg-Sc alloy. Scripta Mater. 50 (2004) 511-516
19. Kaibyshev R., Kazakulov I., Gromov D., Musin F., Lesuer D.R., and Nieh T.G. Superplasticity in a 2219 aluminum alloy. Scripta Mater. 44 (2001) 2411-2417
20. Adabbo H.E., González-Doncel G., Ruano O.A., Belzunce J.M., and Sherby O.D. Strain hardening during superplastic deformation of Al-7475 alloy. J. Mater. Res. 4 (1989) 587-594
21. Pérez-Prado M.T., González-Doncel G., Ruano O.A., and McNelley T.R. Texture analysis of the transition form slip to grain boundary sliding in a discontinuously recrystallized superplastic aluminum alloy. Acta Mater. 49 (2001) 2259-2268
22. Bricknell R.H., and Edington J.W. Deformation characteristics of an Al-6Cu-0.4Zr superplastic alloy. Metall. Trans. 10A (1979) 1257-1263
23. Reid C.N. Deformation Geometry for Materials Scientists (1973), Pergamon Press, New York
24. Humphreys F.J., and Hatherly M. Recrystallization and Related Annealing Phenomena (1995), Pergamon Press, Oxford, UK
25. Gourdet S., and Montheillet F. A model of continuous dynamic recrystallization. Acta Mater. 51 (2003) 2685-2699
26. Kassner M.E., and Barrabes S.R. New developments in geometric dynamic recrystallization. Mater. Sci. Eng. A410-411 (2005) 152-155
27. Padmanabhan K.A., Hirsch J., and Lücke K. Superplasticity-dislocation creep interactions in a coarse grained Al-Cu-Zr alloy. J. Mater. Sci. 26 (1991) 5309-5317
28. Eddahbi, M., PhD Thesis, Universidad Complutense de Madrid, 1998.
29. Edington J.W., Melton K.N., and Cutler C.P. Superplasticity. Prog. Mater. Sci. 21 (1976) 61-158
30. Edington J.W. Microstructural aspects of superplasticity. Metall. Trans. 13A (1982) 703-715
31. Blackwell P.L., and Bate P.S. The absence of relative grain translation during superplastic deformation of an Al-Li-Mg-Cu-Zr alloy. Metall. Trans. 24A (1993) 1085-1093
32. Bate P.S., Humphreys F.J., Ridley N., and Zhang B. Microstructure and texture evolution in the tension of superplastic Al-6Cu-0.4Zr. Acta Mater. 53 (2005) 3059-3069
33. Ghosh A.K., and Raj R. Grain size distribution in superplasticity. Acta Metall. 29 (1981) 607-616