On the influence of loading profile upon the tensile failure of stainless steel

Journal of Applied Physics

Volumn 101, Issue 9, 2007, Pages

  Gray III, G T ^a   Bourne, N K ^b   Henrie, B L ^a,c  

^a LOS ALAMOS NATIONAL LABORATORY   (United States)

^b UNIVERSITY OF MANCHESTER   (United Kingdom)

^c Stanley Associates   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

HUGONIOT STRESS; LOADING PROFILE; SHOCK STRESSES; SQUARE-TOPPED SHOCK LOADING PULSES; TAYLOR WAVE; TENSILE RESPONSE;

FAILURE ANALYSIS; LOAD TESTING; METALLOGRAPHIC PHASES; SHOCK WAVES; TENSILE STRESS;

STAINLESS STEEL;

EID: 34248569673     PISSN: 00218979     EISSN: None     Source Type: Journal    
DOI: 10.1063/1.2720099     Document Type: Conference Paper

References (49)

1. M. A. Meyers and C. T. Aimone, Prog. Mater. Sci. 0079-6425 10.1016/0079-6425(83)90003-8 28, 1 (1983).
2. G. T. Gray III, in High-Pressure Shock Compression of Solids, edited by, J. R. Asay, and, M. Shahinpoor, (Springer-Verlag, New York, 1993), pp. 187-216.
3. G. T. Gray III, in ASM Handbook. Vol. 8: Mechanical Testing and Evaluation, edited by, H. Kuhn, and, D. Medlin, (ASM International, Materials Park, OH, 2000), p. 530-538.
4. J. N. Johnson, J. Appl. Phys. 0021-8979 10.1063/1.329011 52, 2812 (1981).
5. G. T. Gray III, N. K. Bourne, B. L. Henrie, and J. C. F. Millett, J. Phys. IV 110, 773 (2003).
6. R. S. Hixson, G. T. Gray III, P. A. Rigg, L. B. Addessio, and C. A. Yablinsky, in Shock Compression of Condensed Matter-2003, edited by, M. D. Furnish, Y. M. Gupta, and, J. W. Forbes, (American Institute of Physics, Melville, NY, 2004), pp. 469-472.
7. B. M. Butcher, L. M. Barker, D. E. Munson, and C. D. Lundergan, AIAA J. 2, 977 (1964).
8. B. R. Breed, C. L. Mader, and D. Venable, J. Appl. Phys. 0021-8979 10.1063/1.1710098 38, 3271 (1967).
9. G. T. Gray III, N. K. Bourne, M. A. Zocher, P. J. Maudlin, and J. C. F. Millett, in Shock Compression of Condensed Matter-1999, edited by, M. D. Furnish, L. C. Chhabildas, and, R. S. Hixson, (American Institute of Physics, Melville, NY, 2000), pp. 509-512.
10. B. Hopkinson, Philos. Trans. R. Soc. London, Ser. A 213, 437 (1914).
11. J. S. Rinehart, J. Appl. Phys. 0021-8979 10.1063/1.1700005 22, 555 (1951).
12. J. S. Rinehart, J. Appl. Phys. 0021-8979 10.1063/1.1702038 23, 1229 (1952).
13. K. B. Broberg, J. Appl. Mech. 22, 317 (1955). 0021-8936
14. L. V. Altshuler, S. A. Novikov, and I. I. Divnov, Sov. Phys. Dokl. 11, 79 (1966).
15. W. E. Drummond, J. Appl. Phys. 0021-8979 10.1063/1.1723059 29, 167 (1958).
16. V. A. Ogorodnikov, E. S. Tyunkin, A. A. Khokhlov, V. A. Grigorev, and V. V. Mishukov, Strength Mater. 21, 1207 (1989).
17. V. I. Romanchenko and G. V. Stepanov, J. Appl. Mech. Tech. Phys. 0021-8944 10.1007/BF00916495 21, 555 (1981).
18. V. I. Romanchenko and G. V. Stepanov, Strength Mater. 14, 1345 (1982).
19. J. N. Johnson, G. T. Gray III, and N. K. Bourne, J. Appl. Phys. 0021-8979 10.1063/1.371527 86, 4892 (1999).
20. J. A. Brusso, R. N. Wright, and D. E. Mikkola, in Metallurgical Applications of Shock-Wave and High-Strain-Rate Phenomena, edited by, L. E. Murr, K. P. Staudhammer, and, M. A. Meyers, (Marcel Dekker, New York, 1986), pp. 403-418.
21. A. R. Champion and R. W. Rohde, J. Appl. Phys. 0021-8979 10.1063/1.1659190 41, 2213 (1970).
22. R. N. Wright and D. E. Mikkola, Mater. Sci. Eng. 53, 273 (1982).
23. F. Cottet and M. Boustie, J. Appl. Phys. 0021-8979 10.1063/1.343991 66, 4067 (1989).
24. F. Cottet and M. Boustie, in Shock Compression of Condensed Matter-1989, edited by, S. C. Schmidt, J. N. Johnson, and, L. W. Davidson, (Elsevier, Amsterdam, 1990), pp. 425-428.
25. G. T. Gray III and P. S. Follansbee, in Impact Loading and Dynamic Behaviour of Materials, edited by, C. Y. Chiem, H. -D. Kunze, and, L. W. Meyer, (DGM Informationsgesellschaft mbH, Oberursel, Germany, 1988), p. 541-548.
26. G. I. Kanel, S. V. Razorenov, A. Bogatch, A. V. Utkin, and D. E. Grady, Int. J. Impact Eng. 0734-743X 10.1016/S0734-743X(97)87435-0 20, 467 (1997).
27. V. I. Kolomytsev, V. A. Lobodyuk, and G. I. Savvakin, Metallofizika 0204-3580 3, 69-75 (1981); V. I. Kolomytsev, V. A. Lobodyuk, and G. I. Savvakin, [Physics of Metal 0275-9144 3, 1063 (1981)].
28. V. I. Kolomytsev, V. A. Lobodyuk, and G. I. Savvakin, Metallofizika 0204-3580 3, 69-75 (1981); V. I. Kolomytsev, V. A. Lobodyuk, and G. I. Savvakin, [Physics of Metal 0275-9144 3, 1063 (1981)].
29. S. Larouche, E. T. Marsh, and D. E. Mikkola, Metall. Trans. A 12, 1777 (1981).
30. M. A. Meyers, H. -J. Kestenbach, and C. A. O. Soares, Mater. Sci. Eng. 45, 143 (1980).
31. M. A. Meyers, Mater. Sci. Eng. 51, 261 (1981).
32. L. E. Murr and K. P. Staudhammer, Mater. Sci. Eng. 20, 35 (1975).
33. L. E. Murr and J. -Y. Huang, Mater. Sci. Eng. 19, 115 (1975).
34. L. E. Murr and D. Kuhlmann-Wilsdorf, Acta Metall. 26, 847 (1978). 0001-6160
35. L. E. Murr, in Shock Waves and High Strain Rate Phenomena in Metals, edited by, M. A. Meyers, and, L. E. Murr, (Plenum, New York, 1981), pp. 753-777.
36. V. A. Ogorodnikov, Combust., Explos. Shock Waves 38, 484 (2002).
37. K. Wongwiwat and L. W. Murr, Mater. Sci. Eng. 35, 273 (1978).
38. M. A. Meyers, Dynamic Behavior of Materials (Wiley Interscience, New York, 1994).
39. S. A. Novikov, A. P. Pogorelov, and V. A. Sinitsyn, J. Appl. Mech. Tech. Phys. 24, 412 (1984). 0021-8944
40. L. E. Murr, in Shock Waves and High Strain Rate Phenomena in Metals, edited by, M. A. Meyers, and, L. E. Murr, (Plenum, New York, 1981), pp. 607-673.
41. F. R. Tuler and B. M. Butcher, Int. J. Fract. Mech. 4, 431 (1968).
42. T. W. Barbee Jr., L. Seaman, R. Crewdson, and D. Curran, J. Mater. 0022-2453 10.1007/BF02403402 7, 393 (1972).
43. J. J. Gilman and F. R. Tuler, Int. J. Fract. Mech. 6, 169 (1970).
44. N. K. Bourne, Rev. Sci. Instrum. 0034-6748 10.1063/1.1633988 75, 253 (2004).
45. J. C. F. Millett and N. K. Bourne, Meas. Sci. Technol. 0957-0233 10.1088/0957-0233/14/5/309 14, 601 (2003).
46. Z. Rosenberg, D. Yaziv, and Y. Partom, J. Appl. Phys. 0021-8979 10.1063/1.328155 51, 3702 (1980).
47. B. L. Adams, S. I. Wright, and K. Kunze, Metall. Trans. A 24A, 819 (1993).
48. N. K. Bourne, J. Appl. Phys. 0021-8979 10.1063/1.1383584 90, 1201 (2001).
49. A. K. Zurek and M. A. Meyers, in High Pressure Shock Compression of Solids II: Dynamic Fracture and Fragmentation, edited by, L. Davison, D. E. Grady, and, M. Shahinpoor, (Springer-Verlag, New York, 1996), pp. 25-70.