Short-fibre-reinforced reaction-bonded silicon nitride (RBSN) by precursor route: Processing and properties

Journal of the European Ceramic Society

Volumn 27, Issue 12, 2007, Pages 3561-3572

  Herzog, A ^a   Woetting, G ^b   Vogt, U F ^a  

^a SWISS FEDERAL LABORATORIES FOR MATERIALS SCIENCE AND TECHNOLOGY   (Switzerland)

^b HC Starck Ceramics GmbH and Co KG   (Germany)

Author keywords

Composites; Mixing; Precursors organic; Pressing; Short fibre reinforcement; Si3N4

Indexed keywords

CARBON FIBERS; CERAMIC MATRIX COMPOSITES; FILLERS; MIXING; NITRIDATION; NITRIDES; PLASTICS FORMING; PYROLYSIS;

PRECURSORS-ORGANIC; SHORT FIBRE REINFORCEMENT;

SILICON NITRIDE;

CARBON FIBERS; CERAMIC MATRIX COMPOSITES; FILLERS; MIXING; NITRIDATION; NITRIDES; PLASTICS FORMING; PYROLYSIS; SILICON NITRIDE;

EID: 34248556280     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2006.08.021     Document Type: Article

References (36)

1. Benitsch B. Carbon fibre based silicon carbide ceramics for industrial applications. cfi/Ber. DKG 82 9 (2005) E44-E46
2. Krenkel W., Heidenreich B., and Renz R. C/C-SiC composites for advanced friction systems. Adv. Eng. Mater. 4 7 (2002) 427-436
3. Kevorkijan V. Ceramic break rotor for passenger cars. Am. Ceram. Soc. Bull. 81 4 (2002) 27-29
4. Greil P. Active filler controlled pyrolysis of preceramic polymers. 5th Proc. Eur. Ceram. Soc. 4 (1995) 101ff
5. Herzog A., Manufacturing and properties of short fibre reinforced reaction bonded silicon nitride, (Herstellung und Eigenschaften von reaktionsgebundenem Siliciumnitrid). PhD thesis. University Erlangen-Nuernberg, VDI Fortschrittsberichte Reihe 5 Nr. 668, VDI Verlag, Düsseldorf, Germany, 2002 (in German only).
6. Krautkrämer H. Werkstoffprüfung mit Ultraschall (1966), Springer Verlag, Berlin
7. O'Conner J.E. Short-fiber-reinforced elastomer composites. Rubber Chem. Technol. 50 (1977) 945-958
8. Bader M., and Hill A. Short fiber composites. In: Cahn R., Haasen P., and Kramer E. (Eds). Materials Science and Technology (1993), Wiley-VCH, Weinheim 327
9. Eduljee R., and McCullough R. Elastic properties of composites. In: Cahn R., Haasen P., and Kramer E. (Eds). Materials Science and Technology (1993), Wiley-VCH, Weinheim 393
10. Renlund G., Prochazka S., and Doremus R. Silicon oxycarbid glasses, I + II. J. Mater. Res. 6 12 (1991) 2716ff
11. Hurwitz F., Heimann P., Gyekenyesi J., Masnovi J., and Bu X. Polymeric routes to silicon carbide and silicon oxycarbide. Ceram. Eng. Sci. Proc. 12 (1991) 1292ff
12. Seibold, M., Filler induced reaction pyrolysis of polymeric precursors a new concept for production of ceramic composites (Füllergesteuerte Reaktionspyrolyse polymerer Precursoren - ein neues Verfahren zur Herstellung keramischer Verbundwerkstoffe). PhD thesis. University Erlangen-Nuernberg, VDI Fortschrittsberichte Reihe 5, VDI Verlag, Düsseldorf, Germany, 1993 (in German only).
13. Hurwitz F., Heimann P., Farmer S., and Hembree D. Characterisation of pyrolytic conversion of polysilsesquioxanes to silicon oxycarbide. J. Mater. Sci. 28 (1993) 6622ff
14. Bois L., Maquet J., and Babouneau F. Structural characterisation of sol-gel derived oxycarbide glasses. Chem. Mater. 7 (1995) 975ff
15. Erny, T., Production, structure and properties of polymer derrived composites in the MeSi/Polysiloxane system (Herstellung, Aufbau und Eigenschaften Polymer abgeleiteter Verbundkeramik des Ausgangssystems MeSi/Polysiloxan). PhD thesis. University Erlangen-Nuernberg, VDI Fortschrittsberichte Reihe 5, VDI Verlag, Düsseldorf, Germany, 1996 (in German only).
16. Greil P., and Seibold M. Modelling of dimensional changes during polymer ceramic conversion for bulk component fabrication. J. Mater. Sci. 27 (1992) 1053ff
17. Erny T., Seibold M., Jarchow O., and Greil P. Microstructure development of oxycarbide composites during active-filler-controlled polymer pyrolysis. J. Am. Ceram. Soc. 76 1 (1993) 207ff
18. Burns G., Taylor R., Zu Y., Zangvil A., and Zank G. High temperature chemistry of the conversion of siloxanes to silicon carbide. Chem. Mater. 4 (1992) 1313ff
19. Müller, C., A new oxidation protection system for porous ceramics derived from filled silicon polymers (Neuartige Oxidationsschutzbeschichtungen für poröse Keramiken ausgehend von gefülltem Silicium-Polymer). PhD thesis. University Erlangen-Nuernberg, VDI Fortschrittsberichte Reihe 5 Nr. 545, VDI Verlag, Düsseldorf, Germany, 1999 (in German only).
20. Becher P. Microstructural design of toughend ceramics. J. Am. Ceram. Soc. 74 2 (1991) 255ff
21. Kelly A., and Tyson W. Tensile properties of fibre reinforced metals. J. Mech. Phys. Solids 13 (1965) 329ff
22. Navarre, G., Etude des mecanismes d'endommagement et de rupture des materiaux composites a fibres et a matrice ceramiques. PhD thesis. Institut National des Siences Appliquees de Lyon, France, 1990.
23. Rosen B. Thermomechanical properties of fibrous composites. Proceedings of the Royal Society of London A 319 (1970), Materials Science Corporation, Washington, PA 79ff
24. Milewski J. Efficient use of whiskers in the reinforcement of ceramics. Adv. Ceram. Mater. 1 1 (1986) 36ff
25. Starr T. Packing density of fiber/powder blends. Am. Ceram. Soc. Bul. 65 9 (1986) 1293ff
26. Schapery R. Thermal expansion coefficients of composite materials based on energy principles. J. Comp. Mater. (1986) 380ff
27. Munz D., and Fett T. Mechanical Behaviour of Ceramic Materials (Mechanisches Verhalten Keramischer Werkstoffe) (1989), Springer Verlag, Berlin (in German only)
28. Herzog A., Vogt U., and Woetting G. Short fibre reinforced RBSN. 7th Conference and Exhibition of the European Ceramic Society. Brugge, Belgium, 2001. Key Eng. Mater. 206 2 (2002) 923-928
29. 3 composites. J. Mater. Sci. 29 12 (1994) 3215ff
30. Marcks, A., Influence of oxygen to the nitirdation kinetics of silicon (Einfluss von Sauerstoff auf die Nitridierungskinetik von Silicium). PhD thesis. Technische Universität Berlin, Germany, 1980 (in German only).
31. Pigeon R., and Varma A. Quantitative kinetic analysis of silicon nitridation. J. Mater. Sci. 28 (1993) 2999ff
32. 4/SiC fibrous composites using polysilazanes as pre-ceramic binders. Ceram. Eng. Sci. Proc. 11 7-8 (1990) 920ff
33. Pigeon R., Varma A., and Miller A. Some factors influencing the formation of reaction bonded silicon nitride. J. Mater. Sci. 28 (1993) 1919ff
34. Wada H., Ming W., and Tseng T. Stability of phases in the Si-C-N-O system. J. Am. Ceram. Soc. 71 10 (1988) 37ff
35. Licko T., Figusch V., and Puchyova J. Synthesis of silicon nitride by carbothermal reduction and nitriding of silica: control of kinetics and morphology. J. Eur. Ceram. Soc. 9 3 (1992) 219ff
36. Weimer A., Eisman G., Susnitzky D., Beaman D., and McCoy J. Mechanism and kinetics of carbothermal nitridation synthesis of alpha-silicon nitride. J. Am. Ceram. Soc. 80 11 (1997) 2853ff