Bond performance of reinforcing bars in inorganic polymer concrete (IPC)

Journal of Materials Science

Volumn 42, Issue 9, 2007, Pages 3107-3116

  Sofi, M ^a   Van Deventer, J S J ^a   Mendis, P A ^a   Lukey, G C ^a  

^a UNIVERSITY OF MELBOURNE   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

BONDING; ELASTIC MODULI; EXTRAPOLATION; INORGANIC POLYMERS; PORTLAND CEMENT;

BONDING STRENGTH; INORGANIC POLYMER CONCRETE (IPC); MATRIX FORMATION; REINFORCING BARS;

REINFORCED CONCRETE;

EID: 34248350743     PISSN: 00222461     EISSN: 15734803     Source Type: Journal    
DOI: 10.1007/s10853-006-0534-5     Document Type: Article

References (42)

1. Phair JW, van Deventer JSJ, Smith JD (2004) Appl Chem 19(3):423
2. Glukovskii VD, Rostovskaja GS, Rumina GV (1980) Commun 7th Int Cong Chem Cement 3:164
3. Yip CK (2004) The Role of Calcium in Geopolymerisation. PhD Thesis, The University of Melbourne, Department of Chemical Engineering, Melbourne, Australia
4. van Jaarsveld, JGS (2000) The Physical and Chemical Characterisation of Fly Ash Based Geopolymers. PhD Thesis, The University of Melbourne, Department of Chemical Engineering, Melbourne, Australia
5. Davidovits J, Davidovics M (1988) Ceramic Eng Sci Process 9(7-8):835
6. van Jaarsveld JGS, van Deventer JSJ (1999) Cement Concrete Res 29:1189
7. Davidovits J (1994) Properties of Geopolymer Cements. First International Conference on Alkaline Cements and Concretes, Scientific Research Institute on Binders and Materials, vol 1. Kiev State Technical University, Kiev, Ukraine, 131-149
8. Carroll D, Dougherty A, Nisbet M, O'Hare A (1998) U.S. Portland cement industry, concrete and global climate, Proceedings of the 1998 91st Annual Meeting and Exhibition, 98-MA7.04, 9pp, Pittsburgh, PA, USA, San Diego, CA, USA, 9
9. Xu A (1997) In: Chandra S (ed) Waste materials used in concrete manufacturing. Noyes Publications, Westwood, NJ, USA, pp 141-173
10. Priori L, Salvaderi L (2003) Limiting the Greenhouses Gases: A possible Italian strategy in the European Framework, 2003 IEEE Power Engineering Society General Meeting, Jul 13-17 2003, Institute of Electrical and Electronics Engineers Inc., Toronto, Ont., Canada, 2000-2003
11. Malhotra VM (1999) Indian Concrete J 73(10):609
12. Madaan DS, Kukreja CB, Sastry VV (1979) Indian Concrete J 53(11):294
13. Wong YL, Lam L, Poon CS, Zhou FP (1999) Cement Concrete Res 29(12):1905
14. Lee CY, Lee HK, Lee KM (2003) Cement and Concrete Res 33(3):425
15. Shi C, Qian J (2003) Energ Source 25(6):617
16. Shi C, Day LR (1996) Cement Concrete Res 26(9):537
17. Xu A, Sarkar SL (1991) Cement and Concrete Res 21(6):1137
18. Davidovits J (1987) Concrete Int 9:23
19. van Jaarsveld JGS, van Deventer JSJ, Lukey GC (2004) Chem Eng Commun 191(4):531
20. Feng D, Tan H, van Deventer JSJ (2004) J Mater Sci 39(2):571
21. Xu H, van Deventer JSJ (2003) Ind Eng Chem Res 42(8):698
22. Lee WKW, van Deventer JSJ (2004) Cement Concrete Res 34(2):195
23. Malone PG, Kirkpatrick T, Randall CA (1986) "Potential Applications of Alkali-activated Alumino Silicate Binders in Military Operations", WES/MP/GL-85-15, U.S. Army Corps of Engineers, Vicksburg, Mississipi
24. Warner RF, Rangan BV, Hall AS, Faulkes KA (1998) Concrete structures. Ed. Longman, Melbourne, Australia
25. Mendis PA, French CW (2000) Adv Struct Eng J 3(3):245
26. ASTM C 234-91 (1991) Standard Test Method for Comparing Concrete on the Basis of the Bond Developed with Reinforced Steel, ASTM Annual Book of Standards, West Conshohocken, United States
27. Abrishami HH, Mitchell D (1996) J Struct Eng 122(3):255
28. Cairns J, Abdullah R (1995) Struct Eng 73(11):179
29. Choi OC, Hadje-Ghaffari H, Darwin D, McCabe SL (1990) ACI Mater J 88(2):207
30. ASTM A 944-99 (2000) Standard test method for comparing bond strength of steel reinforcing bars to concrete using beam-end specimens. Annual Book of ASTM Standards, West Conshohocken, United States
31. Yip CK, Lukey GC, Van Deventer JSJ (2005) The coexistence of geopolymeric gel and calcium silicate hydrate at the early stage of alkaline activation. Cement Concrete Res 35(9):1688
32. Phair JW (2001) Compositional effects and microstructure of fly ash based geopolymers. PhD Thesis, Department of Chemical Engineering, The University of Melbourne, Australia
33. Lee WKW, van Deventer JSJ (2001) The Addition of Chemical Additives to Control the Setting Speed of Geopolymeric Binders, Proceedings of the 6th World Congress of Chemical Engineering, CD-ROM, Melbourne, Australia
34. Soft M, van Deventer JSJ, Mendis PA, Lukey GC (2006) Engineering properties of inorganic polymer concretes (IPCs). Cement and Concrete Res (In press)
35. Soft, M (2003) Bond Performance of Reinforcing Bars in Geopolymer Concretes. Masters Thesis, Department of Civil and Environmental Engineering, Melbourne University, Melbourne, Australia
36. AS 3600 (2001) Concrete Structures Code, Standard Association of Australia, Sydney
37. Beeby AW (1995) Designers' Handbook to Eurocode 2, London: T. Telford; New York: American Society of Civil Engineers
38. ACI 318 - 02 (2002) "Building Code Requirements for Structural Concrete", Reported by ACI Committee 318
39. Neville AM (1996) Properties of concrete, 4th edn. John Wiley and Sons, Inc
40. Orangun CO, Jirsa JO, Breen JE (1977) J ACI 74(11):14
41. Darwin D, Ebenezer KG (1993) ACI Mater J 90(6):46
42. Tepfers R (1973) A theory of bond applied to overlapped tensile reinforcement splices for deformed bars, Chalmers University of Technology, Goteborg