Studies of the performance of multi-unit impact dampers under stochastic excitation

Journal of Vibration and Acoustics

Volumn 129, Issue 2, 2007, Pages 239-251

  Nayeri, R D ^a   Masri, S F ^a   Caffrey, J P ^a  

^a University of Southern California   (United States)

Author keywords

Impact dampers; Modeling; Particle dampers; Random excitation; Structural control

Indexed keywords

COMPUTATIONAL METHODS; COMPUTER SIMULATION; INTERNAL FRICTION; MOMENTUM TRANSFER; PROBABILITY DISTRIBUTIONS; VIBRATIONS (MECHANICAL);

IMPACT DAMPERS; PARTICLE DAMPERS; RANDOM EXCITATION; STRUCTURAL CONTROL;

DAMPING;

EID: 34248346720     PISSN: 10489002     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2346694     Document Type: Article

References (182)

1. Masri, S. F., 1967, "Effectiveness of Two-Particle Impact Damper," J. Acoust. Soc. Am., 41, pp. 1533-1554.
2. Masri, S. F., 1967, "Motion and Stability of Two-Particle Single-Container Impact Dampers," ASME J. Appl. Mech., 34, pp. 506-507.
3. Masri, S. F., 1970, "Periodic Excitation of Multiple-Unit Impact Dampers," J. Engrg. Mech. Div., 96(5), pp. 1195-1207.
4. Masri, S. F., 1970, "General Motion of Impact Dampers," J. Acoust. Soc. Am., 47(1),pp. 229-237.
5. Christodoulou, L., and Venables, J. D., 2003, "Multifunctional Material Systems: The First Generation," JOM, 55(12), pp. 39-45.
6. Vecchio, K. S., 2005, "Synthetic Multifunctional Metallic-Intermetallic Laminate Composites," JOM, 57(3), pp. 25-31.
7. Masri, S. F., and Ibrahim, A. M., 1973, " Stochastic Excitation of a Simple System With Impact Damper," Earthquake Eng. Struct. Dyn., 1, pp. 337-346.
8. Masri, S. F., and Ibrahim, A. M., 1973, "Response of the Impact Damper to Stationary Random Excitation," J. Acoust. Soc. Am., 53(1), pp. 200-211.
9. Papalou, A., and Masri, S. F., 1996, Performance of Particle Dampers Under Random Excitation, ASME J. Vibr. Acoust., 118(4), pp. 614-621.
10. Papalou, A., and Masri, S. F., 1996, "Response of Impact Dampers With Granular Materials Under Random Excitation," Earthquake Eng. Struct. Dyn., 25(3), pp. 253-267.
11. Papalou, A., and Masri, S. F., 1998, "An Experimental Investigation of Particle Dampers Under Harmonic Excitation," J. Vib. Control, 4, pp. 361-379.
12. Masri, S. F., and Caughey, T. K., 1966, On the Stability of the Impact Damper," ASME J. Appl. Mech., 33(3), pp. 586-592.
13. Masri, S. F., 1978, "Response of Multidegree-of-Freedom System to Nonstationary Random Excitation," ASME J. Appl. Mech., 45(3), pp. 649-656.
14. Masri, S. F., Miller, R. K., Dehghanyar, T. J., and Caughey, T. K., 1989, "Active Parameter Control of Nonlinear Vibrating Structures," ASME J. Appl. Mech., 56, pp. 658-666.
15. Nudehi, S., Mukherjee, R., and Shaw, S. W., 2006, "Active Vibration Control of a Flexible Beam Using a Buckling-Type End Force," ASME J. Dyn. Syst., Meas., Control, 128, pp. 278-286.
16. Karyeaclis, M. P., and Caughey, T. K., 1989, "Stability of Semi-Active Impact Damper: Part I - Global Behavior," ASME J. Appl. Mech., 56, pp. 926-929.
17. Karyeaclis, M. P., and Caughey, T. K., 1989, "Stability of Semi-Active Impact Damper: Part II - Periodic Solutions," ASME J. Appl. Mech., 56, pp. 930-940.
18. Abdel, Gawad M., 1991, "Passive Vibration Damping With Non-Cohesive Granular Materials," in Proceedings of Damping, San Diego, CA, 13-15 February 1991, pp. 1-14.
19. Araki, Y., Yokomichi, I., and Inoue, J., 1985, "Impact Damper With Granular Materials (2nd Report, Both Sides Impact in a Vertical Oscillating System)," Bull. JSME, 241, pp. 1466-1472.
20. Araki, Y, Jinnouchi, Y., and Inoue, J., 1988, "Impact Damper With Granular Materials," ASME PVP Div., 133, pp. 879-893.
21. Araki, Y., Jinnouchi, Y., Inoue, J., and Yokomichi, I., 1989, "Indicial Response of Impact Damper With Granular Material," Seismic Eng., 182, pp. 73-79.
22. Azar, R. C., and Crossley, F. R. E., t977, "Digital Simulation of Impact Phenomenon in Spur Gear Systems," ASME J. Eng. Ind., 9, pp. 792-798.
23. Bapat, C. N., Popplewell, N., and McLachlan, K., 1983, "Stable Periodic Motions of an Impact Pair," J. Sound Vib., 87(1), pp. 19-40.
24. Bapat, C. N., and Sankar, S., 1985, "Single Unit Impact Damper in Free and Forced Vibration," J. Sound Vib.,99(1), pp. 85-94.
25. Bapat, C. N., and Sankar, S., 1985, "Multiunit Impact Damper - re-Examined," J. Sound Vib., 103(4), pp. 457-469.
26. Bapat, C. N., 1995, "The General Motion of an Inclined Impact Damper With Friction," J. Sound Vib., 184(3), pp. 417-427.
27. Bell, L. H., and Bell, D. H., 1994, Industrial Noise Control: Fundamentals and Applications, Marcel Dekker, New York.
28. Beranek, L. L., 1977, Noise and Vibration Control, McGraw-Hill, New York.
29. Blazejczyk Okolewska B., and Peterka, F., 1998, "An Investigation of the Dynamic System With Impacts," Chaos, Solitons Fractals, 9(8), pp. 1321-1338.
30. Bourinet, J., and Hou, D., 1999, "A Dynamic Stiffness Analysis of Damped Tubes Filled With Granular Material," Comput. Struct., 73, pp. 395-406.
31. Brown, G. V., and North, C. M., 1987, "The Impact Damped Harmonic Oscillator in Free Decay," NASA TM 89897.
32. Cempel, C., 1975, "Receptance Model of the Multi-Unit Vibration Impact Neutralizer (Muvin)," J. Sound Vib., 40(2), pp. 249-266.
33. Cempel, C., and Lotz, G., 1993, "Efficiency of Vibrational Energy Dissipation by Moving Shot," J. Struct. Eng., 119(9), pp. 2642-2652.
34. Chaterjee, S., Mallik, A. K., and Ghosh, A., 1995, "On Impact Dampers for Non-Linear Vibrating Systems," J. Sound Vib., 187(3), pp. 403-420.
35. Chaterjee, S., Mallik, A. K., and Ghosh, A., 1996, "Impact Dampers for Controlling Self-Excited Oscillation," J. Sound Vib., 193(5), pp. 1003-1014.
36. Chen, T., Mao, K., Huang, X., and Wang, M. Y., 2001, "Dissipation Mechanisms of Nonobstructive Particle Damping Using Discrete Element Method," Proceedings of SPIE International Symposium on Smart Structures and Materials, Vol. 4331 of Damping and Isolation, pp. 294-301.
37. Chikatani, Y., and Suebiro, A., 1991, "Reduction of Idling Rattle Noise in Trucks," SAE Paper No. 911044, pp. 49-56.
38. Choy, P. K., Liu, C. K., Liao, W. H., and Wang, Y., 2004, "High Speed Pick and Place Apparatus," US Patent No. 6.758.113 B2.
39. Cleary, P. W., 2000, "DEM Simulation of Industrial Particle Flows: Case Studies of Dragline Excavators, Mixing in Tumblers and Centrifugal Mills," Powder Technol., 109, pp. 83-104.
40. Collette, F., Huynh, D., and Semercigil, S. E., 2000, "Further Results With Tuned Absorber-Impact Damper Combination," Proc. of the International Modal Analysis Conference, San Antonio, TX, 7-10 February 2000, Vol. 1, IMAC pp. 404-410.
41. Comparin, R. J., and Singh, R., 1989, "Non-Linear Frequency Response Characteristics of an Impact Pair," J. Sound Vib., 134(2), pp. 259-290.
42. Comparin, R. J., and Singh, R., 1990, "An Analytical Study of Automotive Neutral Gear Rattle," ASME J. Mech. Des., 112, pp. 237-245.
43. Comparin, R. J., and Singh, R., 1990, "Frequency Response of Multi-Degree-of-Freedom System With Clearances," J. Sound Vib., 142, pp. 101-124.
44. Cundall, P. A., and Struck, O. D., 1979, "A Discrete Numerical Model for Granular Assemblies," Geotechnique, 29, pp. 47-65.
45. Yang, D. C. H., and Lin, J. Y., 1987, "Hertzian Damping, Tooth Friction and Bending Elasticity in Gear Impact Dynamics," ASME J. Mech., Transm., Autom. Des., 109, pp. 189-196.
46. de Souza, S. L. T., and Caldas, I. L., 2001, "Basins of Attraction and Transient Chaos in a Gear-Rattling Model," J. Vib. Control, 7, pp. 849-862.
47. de Souza, S. L. T., and Caldas, I. L., 2004, "Controlling Chaotic Orbits in Mechanical Systems With Impacts," Chaos, Solitons Fractals, 19, pp. 171-178.
48. Diaz, A., and Mukherjee, R., 2006, "Modal Disparity Enhancement Through Optimal Insertion of Non-structural Masses," Struct. Multidiscip. Optim., 31(1), pp. 1-7.
49. Diaz, A., and Mukherjee, R., 2006, "A Topology Optimization Problem in Control of Structures Using Modal Disparity," ASME J. Mech. Des., 128(3), pp. 536-541.
50. Dokainish, M. A., and Elmaraghy, H., 1973, "Optimum Design Parameters for Impact Dampers," The ASME Publications Design Engineering and Technical Conference, 61, pp. 1-7.
51. Dubowsky, S., and Freudenstein, F., 1971, "Dynamic Analysis of Mechanical Systems With Clearances, Part 1: Formation of Dynamic Model," ASME J. Eng. Ind., 93, pp. 305-309.
52. Dubowsky, S., and Freudenstein, F., 1971, "Dynamic Analysis of Mechanical Systems With Clearances, Part 2: Dynamic Response," ASME J. Eng. Ind., 93, pp. 310-316.
53. Duffy, K. P., Brown, G. V., and Mehmed, O., 1998, "Impact Damping of Rotating Cantilever Plates," 3rd National Turbine Engine High Cycle Fatigue Conference, San Antonio, TX, 2-5 February 1998.
54. Duffy, K. P., Bagley, R. L., and Mehmed, O., 2000, "On a Self-Tuning Impact Vibration Damper for Rotating Turbomachinery," NASA TM-2000-210215, AIAA Paper 2000-3100, AIAA Joint Propulsion Conference.
55. Duffy, K. P., 2005, "Self-Tuning Impact Damper for Rotating Blades," J. Acoust. Soc. Am., 117(5), p. 2690.
56. Duffy, K. P., Bagley, L., and Mehmed, O., 2001, "A Self-Tuning Impact Damper for Rotating Blades," NASA Tech Briefs TSP LEW-168333. pp. 1-15.
57. Duffy, K. P., Mehmed, O., and Johnson, D., 2001, "Self-Tuning Impact Dampers for Fan and Turbine Blades," 6th National Turbine Engine High Cycle Fatigue Conference, Wright-Patterson AFB, Ohio, 5-8 March 2001.
58. Duffy, K. P., and Mehmed, O., 2002, "Self-Tuning Impact Dampers for Turbine Blades," 7th National Turbine Engine High Cycle Fatigue Conference, Palm Beach Gardens, FL, 14-17 May 2002.
59. Ekwaro Osire S., and Desen, I. C., 2001, "Experimental Study on an Impact Vibration Absorber," J. Vib. Control, 7, pp. 475-493.
60. Ema, S., and Marui, E., 1994, "A Fundamental Study on Impact Dampers," Int. J. Mach. Tools Manuf., 34(3), pp. 407-421.
61. Ema, S., and Marui, E., 1996, "Damping Characteristics of an Impact Damper and its Application," Int. J. Mach. Tools Manuf., 36(3), pp. 293-306.
62. Ema, S., and Marui, E., 2000, "Suppression of Chatter Vibration of Boring Tools Using Impact Dampers," Int. J. Mach. Tools Manuf., 40, pp. 1141-1156.
63. Evesque, P., 1992, "Shaking Dry Powders and Grains," Contemp. Phys., 33(4), pp. 245-261.
64. Erlikh, L. B., 1953, "Vibration Absorber With Impact Action and its Use in Machine Tools," Eng. Dig. (Toronto), 14, pp. 31-32.
65. Fan, L. S., and Zhu, C., 2005, Principles of Gas-Solid Flows, Cambridge University Press, Cambridge, UK.
66. Fandrich, M., and Hogue, C., 1995, "An Experimental Study of Rigid Body Impacts," in Contact Mechanics, M. Raous et al. (eds.) Plenum, New York, pp. 389-396.
67. Fayed, M. E., and Otten, L., 1997, Handbook of Powder Science and Technology, Chapman & Hall, New York.
68. Flint, E. M., 1999, "Experimental Measurements of Particle Damping Effectiveness Under Centrifugal Loads," Proceedings of the Fourth National Turbine Engine High Cycle Fatigue Conference, Monterey, CA, 9-11 February 1999, pp. 1-6.
69. Flint, E. M., Ruhl, E., and Olson, S. E., 2000, "Experimental Centrifuge Testing and Analytical Studies of Particle Damping Behavior," 5th National Turbine Engine High Cycle Fatigue Conference, Chandler, AZ, 7-9 March 2000.
70. Fowler, B. L., Flint, E. M., and Olson, S. E., 2000, "Effectiveness and Predictability of Particle Damping," In Smart Structures and Materials 2000: Damping and Isolation, Proc. SPIE, 3989, pp. 356-367.
71. Flint, E. M., Lindler, J., and Olson, S. E., 2001, "Particle Damping Under Centrifugal Loading," 6th National Turbine Engine High Cycle Fatigue Conference, Palm Beach Gardens, FL, 14-17 May 2002.
72. Fowler, B. L., Flint, E. M., and Olson, S. E., 2000, "Effectiveness and Predictability of Particle Damping," Proceedings of SPIE, Smart Structures and Materials, Damping and Isolation, Proc. SPIE, 3989, pp. 356-367.
73. Fowler, B. L., Flint, E. M., and Olson, S. E., 2001, "Design Methodology for Particle Damping," Proceedings of SPIE, The International Society for Optical Engineering, Smart Structures and Materials, Proc. SPIE, 4331, pp. 186-197.
74. Fricke, J. R., 2000, "Lodengraf Damping - an Advanced Vibration Damping Technology," Shock Vib., 34(7), pp. 22-27.
75. Friend, R. D., and Kinra, V. K., 1999, "Measurement and Analysis of Particle Impact Damping," in Proceedings of SPIE Conf. on Passive Damping and Isolation, San Jose, CA, 23-29 January 1999, pp. 20-31.
76. Friend, R. D., and Kinra, V. K., 2000, "Particle Impact Damping," J. Sound Vib., 233(1), pp. 93-118.
77. Goldsmith, W., 1985, Impact: the Theory and Physical Behavior of Colliding Solids, Dover, Mineola, NY.
78. Grubin, C., 1956, "On the Theory of the Acceleration Damper," ASME J. Appl. Mech., 23(3), pp. 373-378.
79. Hamilton, H. R., Riggs, G. S., and Pickett, J. S., 2000, "Increased Damping in Cantilevered Traffic Signal Structures," J. Struct. Eng., 126(4), pp. 530-537.
80. Heiman, M. S., Sherman, P. J., and Bajaj, A. K., 1987, "On the Dynamics and Stability of an Inclined Impact Pair," J. Sound Vib., 114(3), pp. 535-547.
81. Herbert, R. G., and McWhannell, D. C., 1977, "Shape and Frequency Composition of Pulses From an Impact Pair," ASME J. Eng. Ind., 99, pp. 513-518.
82. Hogue, C., and Newland, D., 1994, "Efficient Computer Simulation of Moving Granular Particles," Powder Technol., 78(1), pp. 51-66.
83. Hollkamp, J. J., and Gordon, R. W., 1998, "Experiments With Particle Damping," Proceedings of SPIE D The International Society for Optical Engineering. Smart Structures and Materials, Passive Damping and Isolation, Proc. SPIE, 3327, pp. 2-12.
84. Hollkamp, J. J., Bagley, R. L., and Gordon, R. W., 1999, "A Centrifugal Pendulum Absorber for Rotating, Hollow Engine Blades," J. Sound Vib., 219(3), pp. 539-549.
85. Holmes, P. J., 1982, "The Dynamics of Repeated Impacts With a Sinusoidally Vibrating Table," J. Sound Vib., 84(2), pp. 173-189.
86. Housner, G. W., Bergman, L. A., Caughey, T. K., Chassiakos, A. G., Claus, R. O., Masri, S. F., Skelton, R. E., Soong, T. T., Spencer, B. F., and Yao, J. T. P., 1997, "Special Issue: Structural Control: Past, Present and Future," J. Eng. Mech., 123(9), pp. 897-971.
87. Hunt, K. H., and Crossley, F. R. E., 1975, "Coefficient of Restitution Interpreted as Damping in Vibro-impact," ASME J. Appl, Mech., 42, pp. 440-445.
88. Hutter, K., and Rajagopal, K., 1994, "On Flows of Granular Materials," Continuum Mech. Thermodyn., 6, pp. 81-139.
89. Ivanov, A. P., 1993, "Stabilization of an Impact Oscillator Near Grazing Incidence Owing to Resonance," J. Sound Vib., 162(3), pp. 562-565.
90. Johnson, K. L., 1995, Contact Mechanics, Cambridge U.P., Cambridge, UK.
91. Kaper, H. G., 1961, "The Behavior of a Spring Mass System Provided With a Discontinuous Dynamic Vibration Absorber," Appl. Sci. Res., Sect. A, 10(1), pp. 369-383.
92. Karagiannis, K., and Pfeiffer, F., 1991, "Theoretical and Experimental Investigations of Gear-Rattling," Nonlinear Dyn., 2, pp. 367-387.
93. Kataoka, M., Ohno, S., and Sugimoto, T., 1991, "A Two-Degree-of-Freedom System Including a Clearance Two-Step Hardening Spring," JSME Int. J., Ser. II, 34, pp. 345-354.
94. Kelly, S. G., 2000, Fundamentals of Mechanical Vibrations, McGraw Hill, New York.
95. Kim, D. J., Guibas, L. J., and Shin, S. Y., 1998, "Fast Collision Detection Among Multiple Moving Spheres," IEEE Trans. Vis. Comput. Graph., 4(3), pp. 230-242.
96. Kim, T. C., and Singh, R., 2001, "Dynamic Interactions Between Loaded and Unloaded Gear Pairs Under Rattle Conditions," SAE Trans., 110(6), pp. 1934-1943.
97. Kim, T. C., Rook, T. E., and Singh, R., 2003, "Effect of Smoothening Functions on the Frequency Response of an Oscillator With Clearance Non-Linearity," J. Sound Vib., 263, pp. 665-678.
98. Kim, T. C., Rook, T. E., and Singh, R., 2005, "Super- and Sub-harmonic Response Calculations for a Torsional System With Clearance Non-Linearity Using the Harmonic Balance Method," J. Sound Vib., 281, pp. 965-993.
99. Lenci, S., Demeio, L., and Petrini, M., 2006, "Response Scenario and Nonsmooth Features in the Nonlinear Dynamics of an Impacting Inverted Pendulum," ASME J. Comput. Nonlinear Dyn., 1(1), pp. 56-64.
100. Lieber, P., and Jensen, D. P., 1945, "An Acceleration Damper: Development, Design, and Some Applications," Trans. ASME, pp. 523-530.
101. Liu, A. Q., Wang, B., Choo, Y. S., and Ong, K. S., 2000, "The Effective Design of Bean Bag as a Vibroimpact Damper," Shock Vib., 7(6), pp. 343-354.
102. Luo, G. W., and Xie, J. H., 1998, "Hopf Bifurcations of a Two-Degree-of-Freedom Vibro-Impact System," J. Sound Vib., 213(3), pp. 391-480.
103. Luo, G. W., and Xie, J. H., 2002, "Hopf Bifurcations and Chaos of a Two-Degree-of-Freedom Vibro-Impact System in Two Strong Resonance Cases," Int. J. Non-Linear Mech., 37(1), pp. 19-34.
104. Ma, S., and Semercigil, S. E., 1997, "A Modified Passive Tuned Absorber for Secondary Systems Under Random Excitation," J. Sound Vib., 208(3), pp. 349-366.
105. Maley, S., and Sun, C. T., 1999, "Particulate Enhanced Damping in Sandwich Structures," Advances in Aerospace Materials and Structures, AD-58, pp. 53-64.
106. Maley, S., 2001, "Particulate Enhanced Damping of Sandwich Structures," Ph.D. thesis, Purdue University.
107. Mao, K. M., Wang, M. Y., Xu, Z. W., and Chen, T. N., 2004, "Simulation and Characterization of Particle Damping in Transient Vibrations," ASME J. Vibr. Acoust., 126(2), pp. 202-211.
108. Mao, K. M., Xu, Z., Wang, M. Y., and Chen, T. N., 2003, "Efficient Computation of Particle Motions in Discrete Element Modeling of Particle Damping," Proc. of Eighth International Symposium on Plasticity and Impact Mechanics, Whistler, Canada, 16-20 July 2003, pp. 994-1005.
109. Masri, S. F., 1969, "Analytical and Experimental Studies of Multiple-Unit Impact Dampers," J. Acoust. Soc. Am., 45(5), pp. 1111-1117.
110. Masri, S. F., 1972, "Forced Vibration of a Class of Non-Linear Two-Degree-of-Freedom Oscillators," Int. J. Non-Linear Mech., 7, pp. 663-674.
111. Mishra, B. K., and Murty, C. V. R., 2001, "On the Determination of Contact Parameters for Realistic Dem Simulations of Ball Mills," Powder Technol., 115, pp. 290-297.
112. Moon, F. C., 1998, Applied Dynamics with Applications to Multi-Body and Mechatronic Systems, Wiley, New York.
113. Nayfeh, S., Verdirame, J., and Varanasi, K., 2002, "Damping of Flexural Vibration by Coupling to Low-Density Granular Materials," 9th SPIE International Symposium on Smart Structures and Materials, San Diego, Ca, 17-21 March 2002, pp. 158-167.
114. Nordmark, A. B., 1991, "Non-Periodic Motion Caused by Grazing Incidence in an Impact Oscillator," J. Sound Vib., 145(2), pp. 279-297.
115. Oledzki, A. A., Siwicki, I., and Wisniewski, J., 1999, "Impact Dampers in Application for Tube, Rod and Rope Structures," Mech. Mach. Theory, 34, pp. 243-253.
116. Padmanabhan, C., and Singh, R., 1995, "Dynamics of a Piecewise Non-Linear System Subject to Dual Harmonic Excitation Using Parametric Continuation," J. Sound Vib., 184(5), pp. 767-799.
117. Padmanabhan, C., Barlow, R. C., Rook, T. E., and Singh, R., 1995, "Computational Issues Associated With Gear Rattle Analysis," ASME J. Mech. Des., 117, pp. 185-192.
118. Paget, A. L., 1937, "Vibration in Steam Turbine Buckets and Damping by Impacts," Engineering (London), 143, pp. 305-307.
119. Pang, C., Popplewell, N., and Semercigil, S. E., 1989, "An Overview of a Bean Bag Dampers Effectiveness," J. Sound Vib., 133(2), pp. 359-363.
120. Panossian, H. V., 1989, "Non-Obstructive Impact Damping Applications for Cryogenic Environments," in Proceedings of Damping 089, West Palm Beach, FL, 8-10 February 1989, Vol. KBC, pp. 1-9.
121. Panossian, H. V., 1990, "Structural Damping/Acoustic Attenuation Optimization Via Nopd," JANNAF Propulsion Meeting.
122. Panossian, H. V., 1991, "An Overview of Nopd: A Passive Damping Technique," Shock Vib., 1(6), pp. 4-10.
123. Panossian, H. V., 1992, "Structural Damping Enhancement via Non-Obstructive Particle Damping Technique," ASME J. Vibr. Acoust., 114(1), pp. 101-105.
124. Panossian, H. V., 1991, "Nonobstructive Particle Damping (Nopd) Performance Under Compaction Forces," Machi. Dyn. Element Vib., 36, pp. 17-20.
125. Papalou, A., 1993, "Analytical and Experimental Studies of Particle Dampers," Ph.D. thesis, Civil Engineering Department, University of Southern California.
126. Pascal, M., 2006, "Dynamics and Stability of a Two-Degree-of-Freedom Oscillator With an Elastic Stop," J. Comput. Nonlinear Dyn., 1(1), pp. 94-102.
127. Pfeiffer, F., and Kunert, A., 1990, "Rattling Models From Deterministic to Stochastic Processes," Nonlinear Dyn., 1, pp. 63-74.
128. Pinotti, P. C., and Sadek, M. M., 1970, "Design Procedure and Charts for the Impact Damper," Proceedings of the 11th International Machine Tool Design and Research Conference, Birmingham, UK, September 1970, Vol. A, pp. 181-195.
129. Popplewell, N., Bapat, C. N., and McLachlan, K., 1983, "Stable Periodic Vibroimpacts of an Oscillator," J. Sound Vib., 87(1), pp. 41-59.
130. Popplewell, N., and Semercigil, S. E., 1989, "Performance of the Bean Bag Impact Damper for a Sinusoidal External Force," J. Sound Vib., 133(2), pp. 193-223.
131. Popplewell, N., and Liao, M., 1991, "A Simple Design Procedure for Optimum Impact Dampers," J. Sound Vib., 146(3), pp. 519-526.
132. Reed, H. H., 1967, "Hanging Chain Impact Dampers: A Simple Model of Damping Tall, Flexible Structures," Wind Effects on Buildings and Structures, Proceedings of Internal Research Seminar, Ottawa, Canada, February 1967.
133. Richards, E., and Lenzi, A., 1984, "On the Prediction of Impact Noise, vii: The Structural Damping of Machinery," J. Sound Vib., 97(4), pp. 549-586.
134. Rigaud, E., and Perret-Liaudet, J., 2003, "Experiments and Numerical Results on Non-Linear Vibrations of an Impacting Hertzian Contact. Part 1: Harmonic Excitation," J. Sound Vib., 265(2), pp. 309-327.
135. Rook, T. E., and Singh, R., 1995, "Dynamic Analysis of a Reverse-Idler Gear Pair With Concurrent Clearances," J. Sound Vib., 182(2), pp. 303-322.
136. Ryzhkov, D. I., 1953, "Vibration Damper for Metal Cutting," Eng. Dig. (Toronto), 14, p. 246.
137. Sadek, M. M., and Mills, B., 1966, "The Application of the Impact Damper to the Control of Machine Tool Chatter," Proceedings of the 7th International Machine Tool Design and Research Conference, Birmingham, UK, January 1966, pp. 243-257.
138. Sadek, M. M., and Mills, B., 1970, "Effect of Gravity on the Performance of an Impact Damper: Part 1. Steady-State Motion," J. Mech. Eng. Sci., 12(4), pp. 268-277.
139. Sadek, M. M., and Williams, C. J. H., 1970, "Effect of Gravity on the Performance of an Impact Damper: Part 2. Stability of Vibrational Modes," J. Mech. Eng. Sci., 12(4), pp. 278-287.
140. Sadek, M. M., 1970, "Impact Dampers for Controlling Vibration in Machine Tools," Machinery, 120, pp. 52-161.
141. Saeki, M., 2002, "Impact Damping With Granular Materials in a Horizontally Vibrating System," J. Sound Vib., 251(1), pp. 153-161.
142. Saluena, C., Poschel, T., Esipov, S. E., and Simonian, S., 1998, "Dissipative Properties of Granular Ensembles," Proc. SPIE Conference on Smart Structures and Materials: Passive Damping and Isolation, Proc. SPIE, 3327, pp. 23-29.
143. Saluena, C., Esipov, S. E., Poschel, T., and Simonian, S., 1998, "Dissipative Properties of Granular Ensembles," Proceedings of SPIE, The International Society for Optical Engineering. Smart Structures and Material: Passive Damping and Isolation, Proc. SPIE, 3327, pp. 23-29.
144. Saluena, C., Esipov, S. E., D., R., and Panossian, H., 1999, "On Modeling of Arrays of Passive Granular Dampers," Proceedings of SPIE D The International Society for Optical Engineering. Smart Structures and Material: Passive Damping and Isolation, Proc. SPIE, 3672, pp. 32-42.
145. Saluena, C., Poschel, T., and Esipov, S. E., 1999, "Dissipative Properties of Vibrated Granular Materials," Phys. Rev. E, 59(4), pp. 4422-4425.
146. Saluenya, C., Esipov, S. E., Poeschel, T., and Simonian, S. S., 1998, "Dissipative Properties of Granular Ensembles," Proceedings of SPIE Conference on Smart Structures, Proc. SPIE, 3327, pp. 18-26.
147. Salvino, L., Dupont, P., and McDaniel, J. G., 1998, "Evaluation of Granular-Fill Damping in Shock-Loaded Box Beams," Proceedings of the 69th Shock and Vibration Symposium, St. Paul, MN, October 1998, pp. 1-10.
148. Sato, T., T., K. A. S. M. Y., 1995, "Vibration Isolation in a System Using Granular Medium," JSME Int. J., Ser. C, 38(3), pp. 434-440.
149. Semercigil, S. E., Collette, F., and Huynh, D., 2002, "Experiments With Tuned Absorber-Impact Damper Combination," J. Sound Vib., 256(1), pp. 179-188.
150. Sharif-Bakhtar, M., and Shaw, S. W., 1988, "The Dynamic Response of a Centrifugal Pendulum Vibration Absorber With Motion-Limiting Stops," J. Sound Vib., 126(2), pp. 221-235.
151. Shaw, S. W., and Homles, P. J., 1983, "Periodically Forced Linear Oscillator With Impacts: Chaos and Long-Period Motions," Phys. Rev. Lett., 51(8), pp. 623-626.
152. Shaw, J., and Shaw, S. W., 1989, "The Onset of Chaos in a Two-Degree-of-Freedom Impacting System," ASME J. Appl. Mech., 56, pp. 168-174.
153. Shaw, S. W., and Pierre, C., 2006, "The Dynamic Response of Tuned Impact Absorbers for Rotating Flexible Structures," ASME J. Comput. Nonlinear Dyn., 1(1), pp. 13-24.
154. Simonian, S. S., 1995, "Smart Structures and Material: Passive Damping," Proceedings of SPIE, The International Society for Optical Engineering, Proc. SPIE, 2445, pp. 149-160.
155. Singh, R., Xie, H., and Comparin, R. J., 1989, "Analysis of an Automotive Neutral Gear Rattle," J. Sound Vib., 131, pp. 177-196.
156. Singh, A., Mukherjee, R., Turner, K., and Shaw, S. W., 2006, "MEMS Implementation of Axial and Follower End Forces," J. Sound Vib., 286(3), pp. 637-644.
157. Skipor, E., and Bain, L. J., 1980, "Application of Impact Damping to Rotary Printing Equipment," ASME J. Mech. Des., 102, pp. 338-343.
158. Sommer, R., 1995, "Sports Equipment for Ball Games Having an Improved Attenuation of Oscillations and Kick-Back Pulses and an Increased Striking Force," U.S. Patent 5,454,562.
159. Sun, J., Sun, H., Chow, L., and Richards, F., 1986, "Predictions of Total Loss Factors of Structures, Part ii: Loss Factors of Sand-Filled Structure," J. Sound Vib., 104(2), pp. 243-257.
160. Thomas, M. D., Knight, W. A., and Sadek, M. M., 1975, "The Impact Damper as a Method Improving Cantilever Boring Bars," ASME J. Eng. Ind., 97(3), pp. 859-866.
161. Thompson, J. M. T., 1983, "Chaos After Period-Doubling Bifurcations in the Resonance of an Impact Oscillator," Phys. Lett., 91A, pp. 5-8.
162. Thompson, J. M. T., S., H. B., 1986, Nonlinear Dynamics and Chaos, Wiley, New York.
163. Tianning, C., Kuanmin, M., Xieqing, H., and Wang, M. Y., 2001, "Dissipation Mechanisms of Non-Obstructive Particle Damping Using Discrete Element Method," Proceedings of SPIE International Symposium on Smart Structures and Materials, pp. 1-8.
164. Tomlinson, G. R., Pritchard, D., and Wareing, R., 2001, "Damping Characteristics of Particle Dampers: Some Preliminary Results," Proc. Inst. Mech. Eng., IMechE Conf., 215, pp. 253-257.
165. Tsuji, Y., Tanaka, T., and Ishida, T., 1992, "Lagrangian Numerical Simulation of Plug Flow of Cohesionless Particles in a Horizontal Pipe," Powder Technol., 71, pp. 239-250.
166. Valuswami, M. A., C., F. R. E., 1975, "Multiple Impacts of a Ball Between Two Plates, Part 1: Some Experimental Observations," ASME J. Eng. Ind., 97, pp. 920-827.
167. Varanasi, K., and Nayfeh, S., 2003, "Vibration Damping by Coupling to Lossy Low-Wave-Speed Media," in SPIE Smart Structures and Materials 2003: Damping and Isolation, SPIE.
168. Vemuri, B. C., Chen, L., Vu-Quoc, L., Zhang, X., and Walton, O., 1998, "Efficient and Accurate Collision Detection for Granular Flow Simulation," Graph. Models Image Process., 60, pp. 403-422.
169. Venugopal, R., and Rajamani, R. K., 2001, "3-D Simulation of Charge Motion in Tumbling Mills by the Discrete Element Method," Powder Technol., 115, pp. 157-166.
170. Mansour, W. M., and Teixeira Filho, D. R., 1974, "Impact Dampers With Coulomb Friction," J. Sound Vib., 33(3), pp. 247-265.
171. Wallascheck, J., 1990, "Dynamics of Non-Linear Automobile Shock-Absorbers," Int. J. Non-Linear Mech., 25, pp. 299-308.
172. Wang, B., and Yang, M., 2000, "Damping of Honeycomb Sandwich Beams," J. Mater. Process. Technol., 105, p. 67.
173. Warburton, G. B., 1957, "Discussion of the Theory of the Acceleration Damper," ASME J. Appl. Mech., 24, pp. 322-324.
174. Wen, G. L., 2001, "Codimension-2 hopf Bifurcation of a Two-Degree-of-Freedom Vibro-Impact System," J. Sound Vib., 242(3), pp. 475-485.
175. Whiston, G., 1992, "Singularities in Vibro-Impact Dynamics," J. Sound Vib., 152(3), pp. 427-460.
176. Wiercigroch, M., and Dekraker, B., 2000, Applied Nonlinear Dynamics and Chaos of Mechanical Systems with Discontinuities, World Scientific, Singapore.
177. Wolf, D. E., 1996, Modeling and Computer Simulation of Granular Media, K. H. Hoffmann and M. Schreiber (eds.), Springer, Heidelberg.
178. Worden, K., and Tomlinson, G., 2001, Nonlinearity in Structural Dynamics: Detection, Identification and Modeling, Inst. of Physics, London.
179. Xie, J. H., 1996, "Codimension Two Bifurcations and hopf Bifurcations of an Impacting Vibrating System," Appl. Math. Mech., 17(1), pp. 65-75.
180. Xu, Z. W., Wang, M. Y., and Chen, T. N., 2005, "Particle Damping for Passive Vibration Suppression: Numerical Modeling and Experimental Investigation," J. Sound Vib., 279, pp. 1097-1120.
181. Yokomichi, I., Araki, Y., Jinnouchi, Y., and Inoue, J., 1996, "Impact Dampers With Granular Materials for Multibody System," ASME J. Pressure Vessel Technol., 118, pp. 95-103.
182. Zhang, X., and Vu-Quoc, L., 2001, "Modeling the Dependence of the Coefficient of Restitution on the Impact Velocity in Elasto-Plastic Collisions," Int. J. Impact Eng., 27, pp. 317-341.