Wear in the prosthetic shoulder: Association with design parameters

Journal of Biomechanical Engineering

Volumn 129, Issue 2, 2007, Pages 223-230

  Hopkins, Andrew R ^a   Hansen, Ulrich N ^a   Amis, Andrew A ^a   Knight, Lucy ^b   Taylor, Mark ^b   Levy, Ofer ^c   Copeland, Stephen A ^c  

^a IMPERIAL COLLEGE LONDON   (United Kingdom)

^b UNIVERSITY OF SOUTHAMPTON   (United Kingdom)

^c ROYAL BERKSHIRE HOSPITAL   (United Kingdom)

Author keywords

Finite elements; Orthopaedics; Shoulder; Wear

Indexed keywords

BONE; COMPUTATIONAL METHODS; FINITE ELEMENT METHOD; ORTHOPEDICS; PATIENT TREATMENT; POLYETHYLENES; PROSTHETICS; TENSILE STRESS;

CONFORMING JOINTS; GLENOID COMPONENTS; PROSTHETIC SHOULDERS;

JOINTS (ANATOMY);

POLY(METHYL METHACRYLATE); POLYETHYLENE;

ABDUCTION; ARTICLE; FINITE ELEMENT ANALYSIS; FRACTURE FIXATION; IMPLANT; KINEMATICS; PROSTHESIS; PROSTHESIS FAILURE; SCAPULA; SHOULDER;

EQUIPMENT FAILURE ANALYSIS; FINITE ELEMENT ANALYSIS; HUMANS; JOINT PROSTHESIS; MODELS, BIOLOGICAL; OSTEOLYSIS; POLYETHYLENES; PROSTHESIS DESIGN; PROSTHESIS FAILURE; SHOULDER JOINT; STRESS, MECHANICAL; TENSILE STRENGTH; WEIGHT-BEARING;

EID: 34248223692     PISSN: 01480731     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2486060     Document Type: Article

References (58)

1. Hopkins, A. R., Hansen, U. N., Amis, A. A., and Emery, R., 2004, "The Effects of Glenoid Component Alignment Variations on Cement Mantle Stresses in Total Shoulder Arthroplasty," J. Shoulder Elbow Surg., 13(6), pp. 668-675.
2. Murphy, L. A., Prendergast, P. J., Christie, R., and Resch, H., 2000, "Finite Element Analysis of an Offset Keeled Glenoid Prosthesis Compared to a Centre Keeled Design," Proceedings of 12th Conference of the European Society of Biomechanics, Dublin, August 27-30.
3. Lacroix, D., Murphy, L. A., and Prendergast, P. J., 2000, "Three-Dimensional Finite Element Analysis of Glenoid Replacement Prostheses: A Comparison of Keeled and Pegged Anchorage Systems," J. Biomech. Eng., 122, pp. 430-436.
4. Gupta, S., van der Helm, F. C. T., and van Keulen, A., 2000, "Stress Analysis of Cemented and Uncemented Glenoid Prostheses," Proceedings of 12th Conference of the European Society of Biomechanics, Dublin, August 27-30.
5. Amstutz, H. C., Campbell, P., Kossovsky, N., and Clarke, I. C., 1992, "Mechanism and Clinical Significance of Wear Debris-Induced Osteolysis," Clin. Orthop. Relat. Res., 276, pp. 7-18.
6. Revell, P. A., AL-Saffar, N., and Kobayashi, A., 1997, "Biological Reaction to Debris in Relation to Joint Prostheses," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 211, pp. 187-197.
7. Ingham, E., and Fisher, J., 2000, "Biological Reactions to Wear Debris in Total Joint Replacement," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 214, pp. 21-37.
8. Blunn, G. W., Joshi, A. B., Minns, R. J., Lidgren, L., Lilley, P., Ryd, L., Engelbrecht, E., and Walker, P. S., 1997, "Wear in Retrieved Condylar Knee Arthroplasties: A Comparison of Wear in Different Designs of 280 Retrieved Condylar Knee Prostheses," J. Arthroplasty, 12, pp. 281-290.
9. Bowsher, J. G., and Shelton, J. C., 2000, "The Influence of Activity Level on Wear, Counterface Roughness and Frictional Torque of CoCr-UHMWPE Total Hip Replacements," Proceedings of 12th Conference of the European Society of Biomechanics, Dublin, August 27-30.
10. McGloughlin, T. M., and Kavanagh, A. G., 2000, "Wear of Ultra-High Molecular Weight Polyethylene (UHMWPE) in Total Knee Prostheses: A Review of Key Influences," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 214, pp. 349-359.
11. Learmonth, I. D., and Cannigham, J. L., 1997, "Factors Contributing to the Wear of Polyethylene in Clinical Practice," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 211, pp. 49-57.
12. Mabrey, J. D., Landry, M. E., Huang, D., Dean, D. D., Blanchard, C. R., Boyan, B. D., Wirth, M. A., Rockwood, C. A., and Agrawal, C. M., 1998, "Comparison of Polyethylene Wear Particles Isolated From Failed Total Hip and Total Shoulder Arthroplasties," Proceedings of Transactions of the Annual Meeting of the ORS.
13. McGee, M. A., Howie, D. W., Costi, K., Haynes, D. R., Wildenauer, C. J., Pearcy, M. J., and McLean, J. D., 2000, "Implant Retrieval Studies of the Wear and Loosening of Prosthetic Joints: A Review," Wear, 241, pp. 158-165.
14. Anglin, C., Wyss, U. P., and Pichora, D. R., 2000, "Glenohumeral Contact Forces," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 214, pp. 637-644.
15. Gillis, A., and Li, S., 2001, "Polyethylene Damage of Glenoid Components from Total Shoulder Replacements as Determined from Retrieval Analysis," Proceedings of 47th Meeting of the Orthopaedic Research Society, San Francisco, CA, February 25-28.
16. Gunther, S. B., Graham, J., Norris, T. R., Ries, M. D., and Pruitt, L., 2002, "Retrieved Glenoid Components - A Classification System for Surface Damage Analysis," J. Arthroplasty, 17(1), pp. 95-100.
17. Hertel, R., and Ballmer, F. T., 2003, "Observations on Retrieved Glenoid Components," J. Arthroplasty, 18(3), pp. 361-366.
18. Scarlat, M. M., Goldberg, B. A., and Matsen, F. A., 2000, "Physical Changes in Polyethylene Glenoid Components After "In Vivo" Use," J. Shoulder Elbow Surg., 9(6), p. 550.
19. Scarlat, M. M., and Matsen, F. A., 2001, "Observations on Retreived Polyethylene Glenoid Components," J. Arthroplasty, 16(6), pp. 795-801.
20. Wirth, M. A., Agrawal, C. M., Mabrey, J. D., Dean, D. D., Blanchard, C. R., Miller, M. A., and Rockwood, C. A., 1999, "Isolation and Characterization of Polyethylene Wear Debris Associated with Osteolysis Following Total Shoulder Arthroplasty," J. Bone Joint Surg. Br., 81A(1), pp. 29-37.
21. Walch, G., Edwards, T. B., Boulahia, A., Boileau, P., Molé, D., and Adeleine, P., 2002, "The Influence of Glenohumeral Prosthetic Mismatch on Glenoid Radiolucent Lines: Results of a Multicenter Study," J. Bone Joint Surg. Br., 84A, pp. 2186-2191.
22. Terrier, A., Büchler, P., and Farron, A., 2006, "Influence of Glenohumeral Conformity After Total Shoulder Arthroplasty," J. Shoulder Elbow Surg., 15, pp. 515-520.
23. Swieszkowski, W., Bednarz, P., and Prendergast, P. J., 2002, "Contact Stresses in the Glenoid Component in Total Shoulder Arthroplasty," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 217, pp. 49-57.
24. Boileau, P., Avidor, C., Krishnan, S. G., Walch, G., Kempf, J.-F., and Molé, D., 2002, "Cemented Polyethylene Versus Uncemented Metal-Backed Glenoid Components in Total Shoulder Arthroplasty: A Prospective, Double-Blind, Randomized Study," J. Shoulder Elbow Surg., 11(4), pp. 351-359.
25. Martin, S. A., Zurakowski, D., and Thornhill, T. S., 2002, "Total Shoulder Arthroplasty With an Uncemented Glenoid Component: 5 to 13-Year Follow-Up," Proceedings of Annual Meeting of the American Academy of Orthopaedic Surgeons, Rosemont, IL.
26. Martin, S. A., Zurakowski, D., and Thornhill, T. S., 2003, "Uncemented Glenoid in Total Shoulder: A Five- to Thirteen-Year Follow-up," Proceedings of Annual Meeting of the American Academy of Orthopaedic Surgeons, New Orleans, LA.
27. Robinson, E. J., Devane, P. A., Bourne, P. A., Rorabeck, C. H., and Hardie, R., 1995, "Comparison of Acetabular Polyethylene Wear in Cemented Versus Cementless Hip Arthroplasty Using 3-D Technique," Proceedings of Annual Meeting of the American Academy of Orthopaedic Surgeons, Chicago, IL.
28. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J., 1996, "Adaptive Finite Element Modelling of Long-Term Polyethylene Wear in Total Hip Arthroplasty," J. Orthop. Res., 14(4), pp. 668-675.
29. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J., 1996, "3-Dimensional Sliding/Contact Computational Simulation of Total Hip Wear," Clin. Orthop. Relat. Res., 333, pp. 41-50.
30. Maxian, T. A., Brown, T. D., Pedersen, D. R., and Callaghan, J. J., 1996, "A Sliding-Distance-Coupled Finite Element Formulation for Polyethylene Wear in Total Hip Arthroplasty," J. Biomech., 29(5), pp. 687-692.
31. Maxian, T. A., Brown, T. D., Pedersen, D. R., McKellop, H. A., Lu, B., and Callaghan, J. J., 1997, "Finite Element Analysis of Acetabular Wear - Validation, and Backing and Fixation Effects," Clin. Orthop. Relat. Res., 344, pp. 111-117.
32. NIH, 1996, "An Anatomical Data Set Developed Under a Contract from the NLM by The Departments of Cellular and Structural Biology, and Radiology, University of Colorado School of Medicine," http://www.nlm.nih.gov/ research/visible/visiblehuman
33. Rice, J. C., Cowin, S. C., and Bowman, J. A., 1988, "On the Dependence of the Elasticity and Strength of Cancellous Bone on Apparent Density," J. Biomech., 21, pp. 155-168.
34. Schaffler, M. B., and Burr, D. B., 1988, "Stiffness of Compact Bone: Effects of Porosity and Density," J. Biomech., 21, pp. 13-16.
35. Zannoni, C., Mantovani, R., and Viceconti, M., 1998, "Material Properties Assignment to Finite Element Models of Bone Structures: A New Method," Med. Eng. Phys., 20, pp. 753-740.
36. Cattaneo, P. M., Dalstra, M., and Frich, L. H., 2001, "A Three-Dimensional Finite Element Model from Computed Tomography: A Semi-Automated Method," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 215, pp. 203-213.
37. Teoh, S. H., Chan, W. H., and Thampuran, R., 2002, "An Elasto-Plastic Finite Element Model for Polyethylene Wear in Total Hip Arthroplasty," J. Biomech., 35, pp. 323-330.
38. Stone, K. D., Grabowski, J. J., Cofield, R. H., Morrey, B. F., and An, K. N., 1999, "Stress Analysis of Glenoid Components in Total Shoulder Arthroplasty," J. Shoulder Elbow Surg., 8(2), pp. 151-158.
39. van der Helm, F. C. T., 1994, "Analysis of the Kinematic and Dynamic Behaviour of the Shoulder Mechanism," J. Biomech., 27(5), pp. 527-550.
40. Poppen, N. K., and Walker, P. S., 1976, "Normal and Abnormal Motion of the Shoulder," J. Bone Joint Surg. Br., 58A(2), pp. 195-201.
41. Inman, V. T., Saunders, J. B. M., and Abbot, L. C., 1944, "Observation on the Function of the Shoulder Joint," J. Bone Joint Surg. Br., 26A, pp. 195-201.
42. Archard, J. F., 1953, "Contact and Rubbing of Flat Surfaces," J. Appl. Physiol., 24, pp. 981-988.
43. Anglin, C., Wyss, U. P., and Pichora, D. R., 2000, "Shoulder Prosthesis Subluxation: Theory and Experiment," J. Shoulder Elbow Surg., 9(2), pp. 104-114.
44. Davis, P. R., 1997, "Some Significant Aspects of Normal Upper Limb Functions," Proceedings of IMechE Conference on Joint Replacement in the Upper Limb, London, UK.
45. Godest, A. C., Beaugonin, M., Haug, E., Taylor, M., and Gregson, P. J., 2002, "Simulation of Knee Joint Replacement During a Gait Cycle Using Explicit Finite Element Analysis," J. Biomech., 35, pp. 267-275.
46. Hopkins, A. R., Hansen, U. N., Amis, A. A., Taylor, M., Gronau, N., and Anglin, C., 2006, "Finite Element Modelling of Glenohumeral Kinematics Following Total Shoulder Arthroplasty," J. Biomech., 39, pp. 2476-2483.
47. Johnson, K. L., 1985, Contact Mechanics, Cambridge University Press, Cambridge, UK.
48. Friedman, R. J., An, Y. H., and Draughn, R. A., 1996, "Conformity and Contact Pressures in Total Shoulder Arthroplasty," Proceedings of 5th World Biomaterials Conference, Toronto, ON, May 29-June 2.
49. Davies, J. P., Burke, D. W., O'Connor, D. O., and Harris, W. H., 1987, "Comparison of the Fatigue Characteristics of Centrifuged and Uncentrifuged Simplex-P Bone Cement," J. Orthop. Res., 5, pp. 366-371.
50. Hopkins, A. R., Hansen, U. N., and Amis, A. A., 2005, "Finite Element Models of Total Shoulder Replacement: Application of Boundary Conditions," Comput. Methods Biomech. Biomed. Eng., 8(1), pp. 39-44.
51. Fisher, J., McEwen, H. M. J., Barnett, P. I., Bell, C. J., Stewart, T. D., Stone, M. H., and Ingham, E., 2001, "Wear of Polyethylene in Artificial Knee Joints," Current Orthopaedics, 15, pp. 399-405.
52. Timoshenko, S. P., and Goodier, J. N., 1970, Theory of Elasticity, McGraw-Hill, New York.
53. Anglin, C., and Wyss, U. P., 2000, "Review of Arm Motion Analyses," Proc. Inst. Mech. Eng., Part H: J. Eng. Med., 214, pp. 541-555.
54. Hopkins, A. R., 2004, "Total Shoulder Arthroplasty Simulation Using Finite Element Analysis," Ph.D. thesis, Imperial College, London, UK.
55. Robinson, E. J., Devane, P. A., Bourne, P. A., Rorabeck, C. H., and Hardie, R., 1995, "Effect of Implant Position on Polyethylene Wear in Total Hip Arthroplasty," Proceedings of Annual Meeting of the American Academy of Orthopaedic Surgeons, Chicago, IL.
56. Kesteris, U., Ilchmann, T., Wingstrand, H., and Onnerfalt, R., 1996, "Polyethylene Wear in Scanhip(R) Arthroplasty with a 22 or 32 mm Head - 62 Matched Patients Followed for 7-9 Years," Acta Orthop. Scand., 67, pp. 125-127.
57. Sychterz, C. J., Engh, C. A., Shah, N., and Engh, C. A., 1997, "Radiographic Evaluation of Penetration by the Femoral Head into the Polyethylene Liner Over Time," J. Bone Joint Surg. Br., 79A, pp. 1040-1046.
58. Kurtz, S. M., Ochoa, J. A., Hovey, C. B., and White, C. V., 1999, "Simulation of Initial Frontside and Backside Wear Rates in a Modular Acetabular Component with Multiple Screw Holes," J. Biomech., 32, pp. 967-976.