A numerical study of the global performance of two static mixers

Journal of Fluids Engineering, Transactions of the ASME

Volumn 129, Issue 3, 2007, Pages 338-349

  Rahmani, Ramin K ^a   Ayasoufi, Anahita ^a   Keith, Theo G ^b  

^a University of Alabama at Birmingham   (United States)

^b NASA GLENN RESEARCH CENTER   (United States)

Author keywords

Helical static mixer; Particles distribution uniformity; Residence time distribution; Shear thickening fluids; Shear thinning fluids; SMX static mixer

Indexed keywords

HELICAL STATIC MIXERS; PARTICLES DISTRIBUTION UNIFORMITY; RESIDENCE TIME DISTRIBUTION; SHEAR-THINNING FLUIDS; THERMAL ENHANCEMENT;

COMPUTER SIMULATION; HEAT TRANSFER; MASS TRANSFER; MIXING; NEWTONIAN FLOW; STATIC ANALYSIS; VISCOUS FLOW;

MIXERS (MACHINERY);

EID: 34248219450     PISSN: 00982202     EISSN: None     Source Type: Journal    
DOI: 10.1115/1.2427082     Document Type: Article

References (50)

1. Sutherland, W. S., 1874, "Improvement in Apparatus for Preparing Gaseous Fuel," UK Patent No. 1784.
2. Shah, N. F., and Kale, D. D., 1991, "Pressure Drop for Laminar Flow of Non-Newtonian Fluids in Static Mixers," Chem. Eng. Sci., 46, pp. 2159-2161.
3. Chandra, K. G., and Kale, D. D., 1992, "Pressure Drop for Laminar Flow of Viscoelastic Fluids in Static Mixers," Chem. Eng. Sci., 47, pp. 2097-2100.
4. Xu, G., Feng, L., Li, Y., and Wang, K., 1997, "Pressure Drop of Pseudo-Plastic Fluids in Static Mixers," Chin. J. Chem. Eng., 5(1), pp. 93-96.
5. Pahl, M. H., and Muschlknautz, E., 1982, "Static Mixers and Their Applications," Int. Chem. Eng., 22, pp. 197-205.
6. Boss, J., and Czastkiewicz, W., 1982, "Principles of Scale-Up for Laminar Mixing Process of Newtonian Fluids in Fluids in Static Mixer," Int. Chem. Eng., 22, pp. 362-367.
7. Morris, W. D., and Misson, P., 1974, "An Experimental Investigation of Mass Transfer and Flow Resistance in the Kenics Static Mixer," I&EC Process Des. Dev., 13, pp. 270-279.
8. Middleman, S., 1974, "Drop Size Distributions Produced by Turbulent Pipe Flow of Immiscible Fluids Through a Static Mixer," I&EC Process Des. Dev., 13, pp. 78-83.
9. Morris, W. D., and Proctor, R., 1977, "The Effect of Twist Ration on Forced Convection in the Kenics Static Mixer," I&EC Process Des. Dev., 16, pp. 406-412.
10. Joshi, P., Nigam, K. D. P., and Nauman, E. B., 1995, "The Kenics Static Mixer: New Data and Proposed Correlations," Chem. Eng. J., 59, pp. 265-271.
11. Li, H. Z., Fasol, C., and Choplin, L., 1996, "Hydrodynamics and Heat Transfer of Rheologically Complex Fluids in a Sulzer SMX Static Mixer," Chem. Eng. Sci., 51(10), pp. 1947-1955.
12. Qi, Y., Kawaguchi, Y., Christensen, R. N., and Zakin, J. L., 2003, "Enhancing Heat Transfer Ability of Drag Reducing Surfactant Solutions With Static Mixers and Honeycombs," Int. J. Heat Mass Transfer, 46, pp. 5161-5173.
13. Lang, E., Drtina, P., Streiff, F., and Fleishli, M., 1995, "Numerical Simulation of the Fluid Flow and the Mixing Process in a Static Mixer," Int. J. Heat Mass Transfer, 38(12), pp. 2239-2250.
14. Visser, J. E., Rozendal, P. F., Hoogstraten, H. W., and Beenackers, A. A. C. M., 1999, "Three-Dimensional Numerical Simulation of Flow and Heat Transfer in the Sulzer SMX Static Mixer," Chem. Eng. Sci., 54, 2491-2500.
15. Khakhar, D. V., Franjione, J. G., and Ottino, J. M., 1987, "A Case Study of Chaotic Mixing in Deterministic Flows: The Partitioned-Pipe Mixer," Chem. Eng. Sci., 42, pp. 2909-2926.
16. Kusch, H. A., and Ottino, J. M., 1992, "Experiments on Mixing in Continuous Chaotic Flows," J. Fluid Mech., 236, pp. 319-348.
17. Hobbs, D. M., and Muzzio, F. J., 1998, "Reynolds Number Effects on Laminar Mixing in the Kenics Static Mixer," Chem. Eng. J., 70, pp. 93-104.
18. Jones, S. C., Sotiropoulos, F., and Amirtharajah, A., 2002, "Numerical Modeling of Helical Static Mixer for Water Treatment," J. Environ. Eng., 128, pp. 431-440.
19. Byrde, O., and Sawley, M. L., 1999, "Optimization of a Kenics Static Mixer for Non-creeping Flow Conditions," Chem. Eng. J., 72, pp. 163-169.
20. Byrde, O., and Sawley, M. L., 1999, "Parallel Computation and Analysis of the in a Static Mixer," Comput. Fluids, 28, pp. 1-18.
21. Rauline, D., Tanguy, P. A., Le Blevec, J. M., and Bousquet, J., 1998, "Numerical Investigation of the Performance of Several Static Mixers," Can. J. Chem. Eng., 76(3), pp. 527-534.
22. Hobbs, D. M., 1998, "Characterization of a Kenics Static Mixer Under Laminar Flow Conditions," Ph.D. thesis, Rutgers, The State University of New Jersey.
23. Wilkinson, W. L., 1960, Non-Newtonian Fluids: Fluid Mechanics, Mixing and Heat Transfer, Pergamon Press, London.
24. Reiner, M., 1949, Deformation and Flow, Lewis, London.
25. Tanner, R. I., 2000, Engineering Rheology, Oxford University Press, London.
26. Wilkinson, W. L., 1960, Non-Newtonian Fluids: Fluid Mechanics, Mixing and Heat Transfer, Pergamon Press, London.
27. Owens, R. G., and Phillips, T. N., 2002, Computational Rheology, Imperial College Press, London.
28. Bird, R. B., Stewart, W. E., and Lightfoot, E. N., 1960, Transport Phenomena, Wiley, New York.
29. Kumar, N. G., 1980, "Viscosity-Molecular Weight-Temperature-Shear Rate Relationships of Polymer Melts: A Literature Review," J. Polym. Sci., Part A-1, 15, pp. 255-325.
30. Carreau, P. J., and Kee, D. D., 1979, "Review of Some Useful Rheological Equations," Can. J. Chem. Eng., 57(1), pp. 3-15.
31. Dziubiński, M., and Marcinkowski, A., 2005, "Comments on Reynolds Number Definition for the Discharge of Non-Newtonian Liquids from Tanks," ASME J. Fluids Eng.. 127(5), pp. 1043-1046.
32. Rahmani, R. K., 1997, "Unstructured Three-Dimensional Delaunay Grid Generation and Solving Three-Dimensional Euler Equations," Master's thesis, Sharif University of Technology, Iran.
33. Thompson, J. F., Soni, B. K., and Weatherill, N. P., 1999, Handbook of Grid Generation, CRC Press, Boca Raton.
34. Warming, R. F., and Beam, R. M., 1975, "Upwind Second-Order Difference Schemes and Applications in Unsteady Aerodynamic Flows," Proc. AIAA 2nd Computational Fluid Dynamics Conference, Hartford, AIAA, Washington, DC, pp. 17-28.
35. Barth, T. I., and Jespersen, D., 1989, "The Design and Application of Upwind Schemes on Unstructured Meshes," Technical Report No. AIAA-89-0366, AIAA 27th Aerospace Sciences Meeting, Reno.
36. Vandoormaal, J. P., and Raithby, G. D., 1984, "Enhancements of the SIMPLE Method for Predicting Incompressible Fluid Flows," Numer. Heat Transfer, 7, pp. 147-163.
37. Rahmani, R. K., Keith, T. G., and Ayasoufi, A., 2005, "Three-Dimensional Numerical Simulation and Performance Study of an Industrial Helical Static Mixer," ASME J. Fluids Eng., 127(3), pp. 467-483.
38. Heywood, N. I., Viney, L. I., and Stewart, I. W., 1984, "Mixing Efficiencies and Energy Requirements of Various Motionless Mixer Designs for Laminar Mixing Applications," Institution of Chemical Engineers Symposium Series No., 89, pp. 147.
39. Byrde, O., and Sawley, M. L., 1999, "Optimization of a Kenics Static Mixer for Non-Creeping Flow Conditions," Chem. Eng. J., 72, pp. 163-169.
40. Tung, T. T., 1976, "Low Reynolds Number Entrance Flows: A Study of a Motionless Mixer," Ph.D. thesis, University of Massachusetts.
41. Kemblowski, Z., and Pustelnik, P., 1988, "Residence Time Distribution of a Power-Law Fluid in Kenics Static Mixers," Chem. Eng. Sci., 43(3), pp. 473-478.
42. Hobbs, D. M., and Muzzio, F. J., 1997, "The Kenics Static Mixer: A Three-Dimensional Chaotic Flow," Chem. Eng. J., 67, pp. 153-166.
43. Nauman, E. B., 1991, "On Residence Time and Trajectory Calculations in Motionless Mixers," Chem. Eng. Sci., 47, pp. 141-148.
44. Heniche, M., Tanguy, P. A., Reeder, M. F., and Fasano, J. B., 2005, "Numerical Investigation of Blade Shape in Static Mixing," AIChE J., 51(1), pp. 44-58.
45. Mickaily-Huber, E. S., Bertrand, F., Tanguy, P., Meyer, T., Renken, A., Rys, F. S., and Wehrli, M., 1996, "Numerical Simulations of Mixing in an SMRX Static Mixer," Chem. Eng. J., 63, pp. 117-126.
46. Lawal, A., and Kalyon, D. M., 1995, "Simulation of Intensity of Segregation Distributions Using Three-Dimensional FEM Analysis: Application to Corotating Twin Screw Extrusion Processing," J. Appl. Polym. Sci., 58, pp. 1501-1507.
47. Rahmani, R. K., Keith, T. G., and Ayasoufi, A., 2006, "Numerical Simulation and Mixing Study of Pseudo-Plastic Fluids in an Industrial Helical Static Mixer," ASME J. Fluids Eng., 128(3), pp. 467-480.
48. Rahmani, R. K., Keith, T. G., and Ayasoufi, A., 2006, "A Numerical Study of the Heat Transfer Rate in a Helical Static Mixer," ASME J. Heat Transfer, 128(8), pp. 769-783.
49. Pahl, M. H., and Muschelknautz, E., 1982, "Static Mixers and Their Applications," Int. Chem. Eng., 22(2), pp. 197-205.
50. Liu, S., Hrymak, A. N., and Wood, P. E., 2006, "Laminar Mixing of Shear Thinning Fluids in a SMX Static Mixer," Chem. Eng. Sci., 61, pp. 1753-1759.