Transient and steady-state solutions of 2D viscoelastic nonisothermal simulation model of film casting process via finite element method

Journal of Rheology

Volumn 51, Issue 3, 2007, Pages 393-407

  Shin, Dong Myeong ^a   Lee, Joo Sung ^b   Kim, Ju Min ^c   Jung, Hyun Wook ^a   Hyun, Jae Chun ^a  

^a Korea University   (South Korea)

^b UNIVERSITY OF CALIFORNIA   (United States)

^c Massachusetts Institute of Technology   (United States)

Author keywords

2D nonisothermal film casting; Draw resonance; Finite element method (FEM); Phan Thien Tanner (PTT) model; Transient solutions

Indexed keywords

COMPUTER SIMULATION; FINITE ELEMENT METHOD; MATHEMATICAL MODELS; PARAMETER ESTIMATION; POLYETHYLENES; VISCOELASTICITY;

2D NONISOTHERMAL FILM CASTING; DRAW RESONANCE; PHAN THIEN TANNER (PTT) MODELS; TRANSIENT SOLUTIONS;

THIN FILMS;

EID: 34247853288     PISSN: 01486055     EISSN: None     Source Type: Journal    
DOI: 10.1122/1.2714781     Document Type: Article

References (30)

1. Agassant, J. F., Y. Demay, C. Sollogoub, and D. Silagy, " Cast film extrusion-An overview of experimental and theoretical approaches., " Int. Polym. Process. 20, 136-148 (2005).
2. Anturkar, N. R., and A. Co, " Draw resonance in film casting of viscoelastic fluids: A linear stability analysis., " J. Non-Newtonian Fluid Mech. 28, 287-307 (1988).
3. Barq, P., J. M. Haudin, J. F. Agassant, and P. Bourgin, " Stationary and dynamic analysis of film casting process., " Int. Polym. Process. 9, 350-358 (1994).
4. Chae, K. S., M. H. Lee, S. J. Lee, and S. J. Lee, " Three-dimensional numerical simulation for the prediction of product shape in sheet casting process., " Korea-Aust. Rheol. J. 12, 107-117 (2000).
5. Co, A., " Draw resonance in film casting., " in Polymer Processing Instabilities, edited by, S. G. Hatzikiriakos, and, K. B. Migler, (Dekker, New York, 2005).
6. Dobroth, T., and L. Erwin, " Causes of edge beads in cast films., " Polym. Eng. Sci. 26, 462-467 (1986).
7. Doufas, A. K., " Analysis of the rheotens experiment with viscoelastic constitutive equations for probing extensional rheology of polymer melts., " J. Rheol. 50, 749-769 (2006).
8. Iyengar, V. R., and A. Co, " Film casting of a modified Giesekus fluid: Stability analysis., " Chem. Eng. Sci. 51, 1417-1430 (1996).
9. Jung, H. W., H.-S. Song, and J. C. Hyun, " Analysis of stability effect of spinline cooling in melt spinning., " J. Non-Newtonian Fluid Mech. 87, 165-174 (1999).
10. Jung, H. W., and J. C. Hyun, " Fiber spinning and film blowing instabilities., " in Polymer Processing Instabilities, edited by, S. G. Hatzikiriakos, and, K. B. Migler, (Dekker, New York, 2005).
11. Jung, H. W., and J. C. Hyun, " Instabilities in extensional deformation polymer processing., " in Rheology Reviews, edited by, D. M. Binding, and, K. Walters, (The British Society of Rheology, Aberystwyth, 2006).
12. Kim, J. M., J. S. Lee, D. M. Shin, H. W. Jung, and J. C. Hyun, " Transient solutions of the dynamics of film casting process using a 2-D viscoelastic model., " J. Non-Newtonian Fluid Mech. 132, 53-60 (2005).
13. Kohler, W. H., P. Shrikhande, and A. J. McHugh, " Modeling melt spinning of PLA fibers., " J. Macromol. Sci., Phys. 44, 185-202 (2005).
14. Lamberti, G., G. Titomanlio, and V. Brucato, " Measurement and modeling of the film casting process 1. Width distribution along draw direction., " Chem. Eng. Sci. 56, 5749-5761 (2001).
15. Lee, J. S., H. W. Jung, and J. C. Hyun, " Melt spinning dynamics of Phan-Thien-Tanner fluids., " Korea-Aust. Rheol. J. 12, 119-124 (2000).
16. Lee, J. S., H. W. Jung, H.-S. Song, K.-Y. Lee, and J. C. Hyun, " Kinematic waves and draw resonance in film casting process., " J. Non-Newtonian Fluid Mech. 101, 43-54 (2001).
17. Lee, J. S., H. W. Jung, and J. C. Hyun, " Stabilization of film casting by an encapsulation extrusion method., " J. Non-Newtonian Fluid Mech. 117, 109-115 (2004).
18. Lee, J. S., D. M. Shin, H. W. Jung, and J. C. Hyun, " Transient solutions of the dynamics in low-speed fiber spinning process accompanied by flow-induced crystallization., " J. Non-Newtonian Fluid Mech. 130, 110-116 (2005).
19. Muslet, I. A., and M. R. Kamal, " Computer simulation of the film blowing process incorporating crystallization and viscoelasticity., " J. Rheol. 48, 525-550 (2004).
20. Pearson, J. R. A., Mechanics of Polymer Processing (Elsevier, New York, 1985).
21. Phan-Thien, N., " A nonlinear network viscoelastic model., " J. Rheol. 22, 259-283 (1978).
22. Sakaki, K., R. Katsumoto, T. Kajiwara, and K. Funatsu, " Three-dimensional flow simulation of a film-casting process., " Polym. Eng. Sci. 36, 1821-1831 (1996).
23. Satoh, N., H. Tomiyama, and T. Kajiwara, " Viscoelastic simulation of film casting process for a polymer melt., " Polym. Eng. Sci. 41, 1564-1579 (2001).
24. Shin, D. M., J. S. Lee, H. W. Jung, and J. C. Hyun, " Analysis of the effect of flow-induced crystallization on the stability of low-speed spinning using the linear stability method., " Korea-Aust. Rheol. J. 17, 63-69 (2005).
25. Shin, D. M., J. S. Lee, H. W. Jung, and J. C. Hyun, " High-speed fiber spinning process with spinline flow-induced crystallization and neck-like deformation., " Rheol. Acta 45, 575-582 (2006).
26. Silagy, D., Y. Demay, and J. F. Agassant, " Study of the stability of the film casting process., " Polym. Eng. Sci. 36, 2614-2625 (1996).
27. Silagy, D., Y. Demay, and J. F. Agassant, " Stationary and stability analysis of the film casting process., " J. Non-Newtonian Fluid Mech. 79, 563-583 (1998).
28. Smith, S., and D. Stolle, " Nonisothermal two-dimensional film casting of a viscous polymer., " Polym. Eng. Sci. 40, 1870-1877 (2000).
29. Sollogoub, C., Y. Demay, and J. F. Agassant, " Cast film problem: A non isothermal investigation., " Int. Polym. Process. 18, 80-86 (2003).
30. Sollogoub, C., Y. Demay, and J. F. Agassant, " Non-isothermal viscoelastic numerical model of the cast-film process., " J. Non-Newtonian Fluid Mech. 138, 76-86 (2006).