Proposed effective width criteria for composite bridge girders

Journal of Bridge Engineering

Volumn 12, Issue 3, 2007, Pages 325-328

  Chen, Stuart S ^a   Aref, Amjad J ^a   Chiewanichakorn, Methee ^a,b   Ahn, Il Sang ^a  

^a the State University of New York   (United States)

^b KPFF CONSULTING ENGINEERS   (United States)

Author keywords

Bridge, girder; Bridges, composite; Concrete; Design criteria; Shear lag; Steel; Width

Indexed keywords

COMPOSITE BRIDGE GIRDERS; DESIGN CRITERIA; FIBER STRESSES; SHEAR LAG;

BEAMS AND GIRDERS; BENDING (DEFORMATION); CODES (SYMBOLS); SHEAR STRAIN; STRENGTH OF MATERIALS; STRUCTURAL ANALYSIS;

COMPOSITE BRIDGES;

EID: 34247261045     PISSN: 10840702     EISSN: None     Source Type: Journal    
DOI: 10.1061/(ASCE)1084-0702(2007)12:3(325)     Document Type: Article

References (42)

1. Adekola, A. O. (1968). "Effective widths of composite beams of steel and concrete." Struct. Eng., 46(9), 285-289.
2. Ahn, I., Nottis, A., Chiewanichakorn, M., Carpenter, J., Chen, S., and Aref, A. (2005). "Experimental study of the ultimate behavior at the negative moment regions of composite bridge." 84th Annual Meeting of the Transportation Research Board, Washington, D.C., Paper 05-2616.
3. Ahn, I.-S., Chiewanichakorn, M., Chen, S. S., and Aref, A. J. (2004). "Effective flange width provisions for composite steel bridges." Eng. Struct., 26(12), 1843-1851.
4. American Association of State Highway Officials (AASHO). (1944). Standard specifications for highway bridges, 4th Ed., Washington, D.C.
5. AASHTO. (2004). AASHTO-LRFD bridge design specifications, 3rd Ed., Washington, D.C.
6. American Concrete Institute (ACI). (1917). "Proposed standard building regulations for the use of reinforced concrete." ACI J., 13(2), 416.
7. ANATECH, Corp. (1997). ANACAP-U concrete analysis program user's manual, version 2.5, San Diego.
8. Ansourian, P. (1983). "The effective width of continuous beams." Civil Engineering Transitions, 25(1), 63-70.
9. Aref, A. J., Chiewanichakorn, M., Chen, S. S., and Ahn, I.-S. (2006). "Effective slab width definition for negative moment regions of composite bridges." J. Bridge Eng., in press.
10. British Standards Institution (BSI). (1979). "Code of practice for design of composite bridges." BS 5400 steel, concrete, and composite bridges, Part 5, London.
11. British Standards Institution (BSI). (1982). "Code of practice for design of steel bridges." BS 5400 steel, concrete, and composite bridges, Part 3, London.
12. Canadian Standards Association (CSA). (2000). "Canadian highway bridge design code." CAN/CSA-S6-00, CSA International, Rexdale, Ont., Canada.
13. Canadian Standards Association (CSA). (2001). "Commentary on CAN/CSA-S6-00, Canadian Highway Bridge Design Code." CSA International, Rexdale, Ont., Canada.
14. Chen, S. S., Aref, A. J., Ahn, I.-S., and Chiewanichakorn, M. (2005). "Effective flange width provisions for composite steel bridges." Proc., Int. Bridge Conf., Engineers' Society of Western Pennsylvania, Pittsburgh, Paper IBC 05-23.
15. Chen, S. S., Aref, A. J., Ahn, I.-S., Chiewanichakorn, M., Carpenter, J. A., Nottis, A., and Kalpakidis, I. (2005). "Effective slab width for composite steel bridge members." NCHRP Rep. No. 543, Transportation Research Board, National Research Council, Washington, D.C.
16. Cheung, M. S., and Chan, M. Y. T. (1978). "Finite strip evaluation of effective flange width of bridge girders." Can. J. Civ. Eng., 5(2), 174-185.
17. Chiewanichakorn, M. (2005). "Intrinsic method of effective flange width evaluation for steel-concrete composite bridges." Ph.D. dissertation, Univ. at Buffalo-State Univ. of New York, Buffalo, N.Y.
18. Chiewanichakorn, M., Aref, A. J., Chen, S. S., and Ahn, I.-S. (2004). "Effective flange width definition for steel-concrete composite bridge girder." J. Struct. Eng., 130(12), 2016-2031.
19. Chiewanichakorn, M., Aref, A. J., Chen, S. S., Ahn, I.-S., and Carpenter, J. A. (2005). "Effective flange width of composite girders in negative moment region." 6th Int. Bridge Engineering Conf., Transportation Research Board, Boston.
20. Committee on Reinforced Concrete Bridges and Culverts. (1916). "Prelininary report." ACI J., 12, 419.
21. Daniels, J. H., and Fisher, J. W. (1966). "Shear connector design for highway bridges: Static behavior of continuous composite beams." Fritz Engineering Laboratory Rep. No. 324.2, Lehigh Univ., Bethlehem, Pa.
22. Elhebaway, M., Fu, C. C., Sahin, M. A., and Schelling, D. R. (1999). "Determination of slab participation from weigh-in-motion bridge testing." J. Bridge Eng., 4(3), 165-173.
23. Ferro-Concrete. (1910). Engineering: An Illustrated Weekly J., 90, 607.
24. Goldbeck, A. T., and Smith, E. B. (1916). "Test of large reinforced concrete slabs." ACI J., 12(2), 324-333.
25. Goode, R. D. (1999). "The Tagushi approach to fractional factorial experimental design." J. Validation Technology, 7(1), 443-447.
26. Heins, C. P., and Fan, H. M. (1976). "Effective composite beam width at ultimate load." J. Struct. Div., 102(11), 2163-2179.
27. Hibbitt, Karlsson and Sorensen, Inc. (HKS). (2000). ABAQUS/standard user's manual, version 6.1, Pawtucket, R.I.
28. Johnson, R. P., and Anderson, D. (1993). Designer's handbook to Eurocode 4 (Part 1.1: Design of composite steel and concrete structures), Thomas Telford, London.
29. Kathol, S., Azizinamini, A., and Luedke, J. (1995). "Strength capacity of steel girder bridges." Technical Rep., Nebraska Department of Roads (NDOR), Lincoln, Neb.
30. Minervino, C., Sivakumar, B., Moses, F., Mertz, D., and Edberg, W. (2004). "New AASHTO guide manual for load and resistance factor rating of highway bridges," J. Bridge Eng., 9(1), 43-54.
31. Moffatt, K. R., and Dowling, P. J. (1978). "British shear lag rules for composite girders." J. Struct. Div., 104(7), 1123-1130.
32. Montgomery, D. C. (2001). Design and analysis of experiments, 5th Ed.,
33. Wiley, New York. Nassif, H. N., Abu-Amra, T., and El-Tawil, S. (2005). "Effective flange width criteria for composite steel girder bridges." Transportation Research Board 84th Annual Meeting, Paper No. 05-2477, Washington, D.C.
34. National Cooperative Highway Research Program (NCHRP). (2003). "Bridge software-validation guideline and examples." NCHRP Rep. No. 454, Transportation Research Board, Washington, D.C.
35. National Cooperative Highway Research Program (NCHRP). (2005). "Effective slab width for composite steel bridge members." NCHRP Rep. No. 543, Transportation Research Board, Washington, D.C.
36. Oehlers, D. J., and Coughlan, C. G. (1986). "The shear stiffness of stud shear connections in composite beams." J. Constr. Steel Res., 6(4), 273-284.
37. Special Committee on Concrete and Reinforced Concrete. (1916). "Final report." Proc. Am. Soc. Civ. Eng., 42,(10) 1657-1708.
38. Unwin, W. C. (1911). "Simplification of formula for ferro-concrete beams with single reinforcement." Engineering: An Illustrated Weekly J., 91, 267-268.
39. Viest, I. M., Fountain, R. S., and Siess, C. P. (1958). "Development of the new AASHO specification for composite steel and concrete bridges." Bulletin of the National Research Council No. 174, U.S. Highway Research Board, Washington, D.C., 1-17.
40. Viest, I. M., and Siess, C. P. (1953). "Composite construction for I-beam bridges." Bulletin of the National Research Council, Vol. 32, No. 161, U.S. Highway Research Board, Washington, D.C., 161-179.
41. Waldram, P. J. (1913). "Some notes on the proposed L.C.C. regulations for reinforced concrete - No. II." Engineering: An Illustrated Weekly J., 95, 836-838.
42. Welch, K. A. (2003). "Validation of checkweighers: A case study." J. Validation Technology, 9(3), 246-252.