First mirrors for diagnostic systems of an experimental fusion reactor II. The mirror tests on the large fusion devices under operation

Plasma Devices and Operations

Volumn 15, Issue 2, 2007, Pages 127-146

  Orlinski, D V ^a   Voitsenya, V S ^b   Vukolov, K Yu ^a  

^a KURCHATOV INSTITUTE   (Russian Federation)

^b INSTITUTE OF PLASMA PHYSICS   (Ukraine)

Author keywords

Diagnostics; First mirrors; Fusion reactor; Model experiments; Optical properties; Reactor environment impact; Sputtering and deposition

Indexed keywords

LASER DIAGNOSTICS; LASER PRODUCED PLASMAS; LOW TEMPERATURE PROPERTIES; MATHEMATICAL MODELS; MIRRORS; OPTICAL PROPERTIES; SPUTTER DEPOSITION;

DIAGNOSTIC SYSTEMS; FIRST MIRRORS; MIRROR SPUTTERING; REACTOR ENVIRONMENT IMPACT;

FUSION REACTORS;

EID: 34247156731     PISSN: 10519998     EISSN: 10294929     Source Type: Journal    
DOI: 10.1080/10519990701281235     Document Type: Article

References (35)

1. D. Orlinski, V. Voitsenya and K. Vukolov. First mirrors for diagnostic systems of an experimental fusion reactor. I. Simulation mirror tests under neutron and ion bombardment. Plasma Device Ops, 15, (2007).
2. G. Federici, C. H. Skinner, J.N. Brooks, et al. Plasma-material interaction in current tokamaks and their implications. Nucl. Fusion, 41, 12R 1967 (2001).
3. J. von Seggern, P. Wienhold, T. Hirai, et al. Long term behavior of material erosion and deposition on the vessel wall and remote areas of TEXTOR. J. Nucl. Mater., 313-316, 439 (2003).
4. M. Rubel, J.P. Coad, N. Bekris, et al Beryllium and carbon films in JET following D-T operation. J. Nucl. Mater., 313-316, 321 (2003).
5. M. Mayer, R. Behrisch, C. Gowers, et al. Change of optical reflectivity of mirror surfaces exposed to JET plasmas. In Diagnostics for Experimental Thermonuclear Fusion Reactors, Vol. 2, edited by P. Stott and others (Plenum, New York, 1998), p. 279.
6. V.S. Voitsenya, A. Sagara, A.F. Bardamid, et al. Effect of exposure inside the LHD vessel on reflectance of stainless steel mirrors. Probl. Atom. Sci. Technol., Sci: Plasma Phys., 5, 42 (2002).
7. A.J.H. Donne, M.F. Graswinckel, M. Cavinato, et al. Rev. Scient. Instrum., 75, 4694 (2004).
8. V.S. Voitsenya, A. Sagara, A.I. Belyaeva, et al. Effect of exposure inside the LHD vessel on optical properties of stainless steel mirrors. Plasma Device Ops, 13, 291 (2005).
9. V. Philipps, P. Wienhold, A. Kirschner, et al. Erosion and redeposition of wall material in controlled fusion devices. Vacuum, 67, 399 (2002).
10. T. Hino, A. Sagara, Y. Nobuta, et al. Material probe analysis for plasma facing surface in the Large Helical Device. Nucl. Fusion, 44, 496 (2004).
11. A.F. Bardamid, V. T. Gritsyna, V. G. Konovalov, et al. Ion energy distribution effect on degradation of optical properties of ion bombarded copper mirrors. Surf. Coating Technol., 103-104, 365 (1998).
12. K.Yu. Vukolov, M. I. Guseva, S.A. Evstigneev, et al. Exposure of stainless still mirrors in T-10 tokamak. Plasma Devices Ops, 12, 193 (2004).
13. K.Yu. Vukolov, V.M. Gureev, M.I. Guseva, et al. The deposition of contaminants on the in-vessel mirrors in T-10 tokamak. In Proceedings of the 31st EPS Conference on Plasma Physics, European Conference Abstracts, Vol. 28G, London, UK, 28 June-2 July 2004 (European Physical Society, Geneva, 2004), paper P-1.184.
14. W. Jacob. Surface reactions during growth and erosion of hydrocarbon films. Thin Solid Films, 326, 1 (1998).
15. M. Lipa, B. Schunke, Ch. Gil, et al. First mirror study in Tore Supra. Final Report EFDA TW2-TPDS-DIADEV-D02, Garching, Germany, January 2005.
16. M. Lipa, B. Schunke, Ch. Gil, et al. Analyses of metallic first mirror samples after long term plasma exposure in Tore Supra. Fusion Engng Des., 81, 221 (2006).
17. A. Bardamid, V. Bryk, V. Konovalov, et al. Erosion of steel under bombardment with ions of a deuterium plasma. Vacuum, 58, 10 (2000).
18. V.S. Voitsenya, A. Sagara, M. Lipa, et al. The properties of contaminated films deposited on in-vessel mirrors in Large Helical Device, Tore Supra, TCV and TRIAM- IM. In Proceedings of the 33rd EPS Conference on Plasma Physics, European Conference Abstracts, Vol. 301, Rome, Italy, 19-23 June 2006 (European Physical Society, Geneva, 2006), paper P-5.134 (2006). Available online at: http://eps2006.frascati.enea.it.
19. G. De Temmerman, R.A. Pitts, V.S. Voitsenya, et al. First mirror tests for ITER: influence of material choice on the deposition/erosion mechanisms affecting optical reflectivity. In Proceedings of the International Conference on Plasma-Surface Interaction in Controlled Fusion Devices, Hefei Anhui, PR China, 22-26 May 2006, paper P1-31, in J. Nucl. Mater. (to be published).
20. P. Wienhold, A. Litnovsky, V. Philipps, et al. Exposure of metal mirrors in the scrape-off layer of TEXTOR. J. Nucl. Mater., 337-339, 1116 (2005).
21. V. Voitsenya, A.E. Costley, V. Bandurko, et al. Diagnostic first mirror for burning plasma experiment. Rev. Scient. Instrum., 72, 475 (2001).
22. E.T. Arakawa, S.M. Dolfini, J.C. Ashley, et al. Arc-evaporated carbon films: Optical properties and electron free paths. Phys. Rev., 31, 8097 (1985).
23. K. Narihara and S. Hirokura. Cleaning of Thomson scattering window by a laser blow-off method. Rev. Scient. Instrum., 63, 3527 (1992).
24. B.W. Brown, C.W. Gowers, P. Nielsen, et al. Window transmission and cleaning schemes used with the light detection and ranging Thomson scattering diagnostic on the JET tokamak. Rev. Scient. Instrum., 66, 3077 (1995).
25. H. Yoshida, O. Naito, T. Hatae, et al. Solution for window coating problem developed in the JT-60U Thomson scattering system. Research Report JAERI-Research 96-062, Japan Atomic Energy Research Institute, Naka, Japan, 1996, 25 pp.
26. V.S. Voitsenya, V.G. Konovalov, M.F. Becker, et al. Material selection for the in situ mirrors of laser diagnostics in fusion devices. Rev. Scient. Instrum., 70, 2016 (1999).
27. H.M. Musal. Thermomechanical stress degradation of metal mirror surface under pulsed laser irradiation. In Laser Induced Damage in Optical Materials, NBS Special Publication 568 (National Bureau of Standards, Washington, DC, 1980), pp. 159-173.
28. R.M. Wood, Laser Damage in Optical Materials, Adam Hilger Series on Optics and Optoelectronics (Adam Hilger, Bristol, 1986), p.27.
29. N. Koumvakalis, C.S. Lee and M. Bass. Single and multiple pulse catastrophic damage in diamond-turned Cu and Ag mirrors at 10.6, 1.06 and 0.532 μm. Opt. Engng, 22, 419 (1983).
30. M.F. Becker, Ch. Ma and R.M. Walser. Predicting multipulse laser induced failure for molybdenum metal mirrors. Appl. Optics, 30, 5239 (1991).
31. Y. Jee, M.F. Becker and R.M. Walser. Laser induced damage on single crystal metal surfaces. J. Opt. Soc. Am. B, 5, 648 (1988).
32. A. Gorshkov, I. Bel'bas, V. Sannikov, et al. Frequency laser damage on single Mo mirrors. Fusion Engng Des., 66-68, 865 (2003).
33. A. Gorshkov, I. Bel'bas, M. Maslov, et al. Laser damage investigations of Cu mirrors. Fusion Engng Des., 74, 859 (2005).
34. A. Gorshkov, K. Vukolov, I. Bel'bas, et al. Laser damage thresholds of single crystal tungsten mirror. In Proceedings of the 30th EPS Conference on Controlled Fusion and Plasma Physics, European Conference Abstracts, Vol. 27A, St Petersburg, Russia, 7-11 July, 2003 (European Physical Society, Geneva, 2003), paper P-2.82.
35. A.F. Bardamid, A.I. Belyaeva, V.N. Bondarenko, et al. Behaviour of mirrors fabricated from amorphous alloy under impact of deuterium plasma ions. Phys. Scripta T, 123, 89 (2006).