Investigation of the burnishing force during the burnishing process with a cylindrical surfaced tool

Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

Volumn 220, Issue 6, 2006, Pages 893-904

  Luo, Hongyun ^a   Liu, Jianying ^b   Wang, Lijiang ^b   Zhong, Qunpeng ^a  

^a BEIHANG UNIVERSITY   (China)

^b JILIN UNIVERSITY   (China)

Author keywords

Burnishing process; Elastic plastic contact mechanics; Impact mechanics; Three dimensional burnishing force

Indexed keywords

BRASS; COMPUTER SIMULATION; ELASTOPLASTICITY; MATHEMATICAL MODELS; SURFACE ROUGHNESS;

POLYCRYSTALLINE DIAMOND TOOL; PROCESS PARAMETERS; SIMULATION CURVES; SURFACE HARDNESS;

BURNISHING;

EID: 34247107516     PISSN: 09544054     EISSN: None     Source Type: Journal    
DOI: 10.1243/09544054B07604     Document Type: Article

References (18)

1. Klocke, F. and Lier, J. Roller burnishing of hard turned surfaces. Int. J. Mach. Tools Mf., 1998, 38, 419-423.
2. Luo, H., Wang, L., and Zhang, C. Study on the aluminum alloy burnishing process and the existence of the outstripping phenomenon. J. Mater. Process Technol., 2001, 116, 88-90.
3. Luo, H., Liu, J., Wang, L., and Zhong, Q. Investigation of the burnishing process with PCD tool on non-ferrous metals. Int. J. Adv. Mfg Technol., 2005, 25, 454-459.
4. Hassan, A. M. and Al-Wahhab, O. M. A. Surface characteristics of some roller burnished non-ferrous components. Mater. Mfg Process, 1998, 13 (4), 505-515.
5. Hassan, A. M. Effects of ball and roller burnishing on the surface roughness and hardness of some nonferrous metals. J. Mater. Process Technol., 1997, 72 (3), 385-391.
6. Hassan, A. M. Investigation into the surface characteristics of burnished cast Al-Cu alloys. Int. J. Mach. Tools Mf., 1997, 37 (6), 813-821.
7. Lin, Y. C., Yan, B. H., and Huang, F. Y. Surface improvement using a combination of electrical discharge machining with ball burnish machining based on the Taguchi method. Int. J. Adv. Mfg Technol., 2001, 18 (9), 673-682.
8. Yu, X. and Wang, L. Effect of various parameters on the surface roughness of an aluminum alloy burnished with a spherical surfaced polycrystalline diamond tool. Int. J. Mach. Tools Mf., 1999, 39, 459-469.
9. Némat, M. and Lyons, A. G. An investigation of the surface topography of ball burnished mild steel and aluminum. Int. J. Adv. Mfg Technol., 2000, 16 (7), 469-473.
10. Wang, K. H., Blunt, L. A., and Stout, K. J. 3-D characterization of the surface topography of the ballizing process. Int. J. Mach. Tools Mf., 1998, 38, 437-444.
11. Hassan, A. M., Al-Jalil, H. F., and Ebied, A. A. Burnishing force and number of ball passes for the optimum surface finish of brass components. J. Mater. Process Technol., 1998, 83 (1-3), 176-179.
12. Xiao, Y. H. E. (translated by Gao, X. Z.) Theoretical cutting study, 1985 (Guo Fang Industry Publishing House, Beijing).
13. Wang, S. J. Research on the prediction machining with PCD tool. Masters dissertation, Jilin University of Technology, People's Republic of China, 1993.
14. Johnson, K. L. Contact mechanics, 1985 (Cambridge University Press, Cambridge).
15. Kapoor, A., Williams, J. A., and Johnson, K. L. The steady state sliding of rough surface. Wear, 1994, 175, 81-92.
16. Greenwood, J. A. and Williamson, J. B. P. Contact of nominally flat surfaces. Proc. R. Soc. (London), 1966, A295, 300-319.
17. Francis, H. A. Phenomenological analysis of plastic spherical indentation. Trans. ASME, J. Appl. Mechanics, 1976, 34, 153-159.
18. Tabor, D. The hardness of metals, 1951 (Oxford University Press).