Corrigendum to "Uniaxial viscosity of gadolinium-doped ceria determined by discontinuous sinter forging" [J. Eur. Ceram. Soc. 27 (2007) 3127-3133] (DOI:10.1016/j.jeurceramsoc.2007.01.003);Uniaxial viscosity of gadolinium-doped ceria determined by discontinuous sinter forging

Journal of the European Ceramic Society

Volumn 27, Issue 10, 2007, Pages 3127-3133

  Chang, Jaemyung ^a   Guillon, Olivier ^b   Rödel, Jürgen ^b   Kang, Suk Joong L ^a  

^a Korea Advanced Institute of Science and Technology (KAIST)   (South Korea)

^b Laboratory for Control Engineering and Process Automation   (Germany)

Author keywords

CeO2; Fuel cells; Sintering; Viscous behaviour

Indexed keywords

DENSITY (SPECIFIC GRAVITY); FORGING; GADOLINIUM COMPOUNDS; GRAIN SIZE AND SHAPE; MATHEMATICAL MODELS; NANOCRYSTALLINE MATERIALS; SINTERING; VISCOSITY;

DISCONTINUOUS SINTER FORGING; GADOLINIUM-DOPED CERIA; RELATIVE DENSITY; UNIAXIAL VISCOSITY;

FUEL CELLS;

DENSITY (SPECIFIC GRAVITY); FORGING; FUEL CELLS; GADOLINIUM COMPOUNDS; GRAIN SIZE AND SHAPE; MATHEMATICAL MODELS; NANOCRYSTALLINE MATERIALS; SINTERING; VISCOSITY;

EID: 34147165518     PISSN: 09552219     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jeurceramsoc.2008.10.014     Document Type: Erratum

References (38)

1. Minh M.Q., and Takahashi T. Science and Technology of Ceramic Fuel Cells (1995), Elsevier, Amsterdam
2. Singh P., and Minh N.Q. Solid oxide fuel cells: technology status. Int. J. Appl. Ceram. Technol. 1 (2004) 5-15
3. Inaba H., and Tagawa H. Ceria-based solid electrolytes. Solid State Ionics 83 (1996) 1-16
4. Goodenough J.B. Oxide-ion electrolytes. Annu. Rev. Mater. Res. 33 (2003) 91-128
5. Yokokawa H., Sakai N., Horita T., and Yamaji K. Recent developments in solid oxide fuel cell materials. Fuel Cells 1 (2001) 117-131
6. Cai Z., Lan T.N., Wang S., and Dokiya M. Supported Zr(Sc)O-2 SOFCs for reduced temperature prepared by slurry coating and co-firing. Solid State Ionics 152 (2002) 583-590
7. Scherer G.W. Sintering Inhomogeneous glasses: application to optical waveguides. J. Non-Cryst. Solids 34 (1979) 239-256
8. Scherer G.W. Viscous Sintering under a uniaxial load. J. Am. Ceram. Soc. 69 (1986) C206-C207
9. Bordia R.K., and Scherer G.W. On constrained sintering. II. Comparison of constitutive models. Acta Mater. 36 (1988) 2399-2409
10. McMeeking R.M., and Kuhn L.T. A diffusional creep law for powder compacts. Acta Metall. Mater. 40 (1992) 961-969
11. Du Z.Z., and Cocks A.C.F. Constitutive models for the sintering of ceramic components. 1. Material models. Acta Mater. 40 (1992) 1969-1979
12. Cocks A.C.F. The structure of constitutive laws for the sintering of fine-grained materials. Acta Metall. Mater. 42 (1994) 2191-2210
13. Hsueh C.H., Evans A.G., Cannon R.M., and Brook R.J. Viscoelastic stresses and sintering damage in heterogeneous powder compacts. Acta Metall. 34 (1986) 927-936
14. Svoboda J., Riedel H., and Zipse H. Equilibrium pore surfaces, sintering stresses and constitutive-equations for the intermediate and late stages of sintering. 1. Computation of equilibrium surfaces. Acta Metall. Mater. 42 (1994) 435-443
15. Riedel H., Zipse H., and Svoboda J. Equilibrium pore surfaces, sintering stresses and constitutive-equations for the intermediate and late stages of sintering. 2. Diffusional densification and creep. Acta Metall. Mater. 42 (1994) 445-452
16. Bouvard D., and Meister T. Modelling bulk viscosity of powder aggregate during sintering. Model. Simul. Mater. Sci. Eng. 8 (2000) 377-388
17. Skorokhod V.V. Rheological Basis of the Theory of Sintering (1972), Naukova Dumka, Kiev
18. Boutz M.M.R., Winnubst L., and Burggraaf A.J. Low-temperature sinter forging of nanostructured Y-TZP and YCe-TZP. J. Am. Ceram. Soc. 78 (1995) 121-128
19. Cai P.Z., Messing G.L., and Green D.J. Determination of the mechanical response of sintering compacts by cyclic loading dilatometry. J. Am. Ceram. Soc. 80 (1997) 445-452
20. Bang J., Lu G.Q., and Calata J.N. Determination of shear viscosity of borosilicate glass plus silica powder compacts by an optical system. J. Mater. Res. 14 (1999) 1062-1068
21. Gillia O., Josserond C., and Bouvard D. Viscosity of WC-Co compacts during sintering. Acta Mater. 49 (2001) 1413-1420
22. Lee S.H., Messing G.L., and Green D.J. Bending creep test to measure the viscosity of porous materials during sintering. J. Am. Ceram. Soc. 86 (2003) 877-882
23. Zuo R., Aulbach E., Bordia R.K., and Rödel J. Critical evaluation of hot forging experiments: case study in alumina. J. Am. Ceram. Soc. 86 (2003) 1099-1105
24. Zuo R., Aulbach E., and Rödel J. Experimental determination of sintering stresses and sintering viscosities. Acta Mater. 51 (2003) 4563-4574
25. Aulbach E., Zuo R., and Rödel J. Laser-assisted high-resolution loading dilatometer and applications. Exp. Mech. 44 (2004) 71-75
26. Kanters J., Eisele U., and Rödel J. Cosintering simulation and experimentation: case study of nanocrystalline zirconia. J. Am. Ceram. Soc. 84 (2001) 2757
27. Lee S.H., Messing G.L., and Green D.J. Warpage evolution of screen printed multilayer ceramics during co-firing. Key Eng. Mater. 264-268 (2004) 321-328
28. Ravi D., and Green D.J. Sintering stresses and distortion produced by density differences in bi-layer structures. J. Eur. Ceram. Soc. 26 (2006) 17-25
29. Horovistiz A.L., Frade J.R., and Hein L.R.O. Comparison of fracture surface and plane section analysis for ceramic grain size characterization. J. Eur. Ceram. Soc. 24 (2004) 619-626
30. Kleinlogel C., and Gauckler L.J. Sintering and properties of nanosized ceria solid solutions. Solid State Ionics 135 (2000) 567-573
31. 2 ceramics: sintering and grain growth behaviors. Acta Mater. 52 (2004) 2221-2228
32. Rahaman M.N., DeJonghe L.C., and Brook R.J. Effect of shear-stress on sintering. J. Am. Ceram. Soc. 69 (1986) 53-58
33. Venkatachari K.R., and Raj R. Shear deformation and densification of powder compacts. J. Am. Ceram. Soc. 69 (1986) 499-506
34. Jud E., Huwiler C.B., and Gauckler L.J. Sintering analysis of undoped and cobalt oxide doped ceria solid solutions. J. Am. Ceram. Soc. 88 (2005) 3013-3019
35. Beere W. Unifying theory of stability of penetrating liquid-phases and sintering pores. Acta Metall. 23 (1975) 131-138
36. Coble R.L., and Kingery W.D. Effect of porosity on physical properties of sintered alumina. J. Am. Ceram. Soc. 39 (1956) 377-385
37. Rahaman M.N., and De Jonghe L.C. Creep-sintering of zinc oxide. J. Mater. Sci. 22 (1987) 4326-4330
38. Guillon, O., Bordia, R. and Rödel, J., Effect of green state processing on the sintering stress and viscosity of alumina compacts. J. Am. Ceram. Soc., in press.