Fluid-structural coupling effects on the dynamics of mistuned bladed disks

AIAA Journal

Volumn 45, Issue 3, 2007, Pages 552-561

  He, Zhijiang ^a,c,d   Epureanu, Bogdan I ^a,c,d   Pierre, Christophe ^b,d,e  

^a UNIVERSITY OF MICHIGAN   (United States)

^b MCGILL UNIVERSITY   (Canada)

^c Department of Mechanical Engineering ^*  (United States)

^d AIAA   (United States)

^e Faculty of Engineering   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

AEROELASTIC MODELS; CANTILEVER BLADES; HIGH FIDELITY STRUCTURAL MODELS; MISTUNED BLADED DISKS;

AERODYNAMICS; COMPUTATION THEORY; CONSTRAINT THEORY; FLUID STRUCTURE INTERACTION; TURBOMACHINE BLADES;

DISKS (MACHINE COMPONENTS);

EID: 34047270106     PISSN: 00011452     EISSN: None     Source Type: Journal    
DOI: 10.2514/1.23809     Document Type: Article

References (33)

1. Tobias, S. A., and Arnold, R. N., "The Influence of Dynamical Imperfection on the Vibration of Rotating Disks," Proceedings of the Institution of Mechanical Engineers, Vol. 171, 1957, pp. 669-690.
2. Wei, S. T., and Pierre, C., "Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry, Part 1: Free Vibration," Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 110, No. 4, 1988, pp. 429-438.
3. Wei, S. T., and Pierre, C., "Localization Phenomena in Mistuned Assemblies with Cyclic Symmetry, Part 2: Forced Vibrations," Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 110, No. 4, 1988, pp. 439-449.
4. Griffin, J. H., and Hoosac, T. M., "Model Development and Statistical Investigation of Turbine Blade Mistuning," Journal of Vibration, Acoustics, Stress, and Reliability in Design, Vol. 106, No. 2, 1984, pp. 204-210.
5. Castanier, M. P., Òttarsson, G., and Pierre, C., "A Reduced Order Modeling Technique for Mistuned Bladed Disks," Journal of Vibration and Acoustics, Vol. 119, No. 3, 1997, pp. 439-447.
6. Bladh, R., Castanier, M. P., and Pierre, C., "Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part 1: Theoretical Models," Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 1, 2001, pp. 89-99.
7. Bladh, R., Castanier, M. P., and Pierre, C., "Component-Mode-Based Reduced Order Modeling Techniques for Mistuned Bladed Disks, Part 2: Applications," Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 1, 2001, pp. 100-108.
8. Lim, S., Bladh, R., Castanier, M. P., and Pierre, C., "A Compact, Generalized Component Mode Mistuning Representation for Modeling Bladed Disk Vibrations," Proceedings of the 44th AIAA/ASME/ASCE/AMA Structures, Structural Dynamics and Material Conference, Vol. 2, AIAA, Reston, VA, 2003, pp. 1359-1380.
9. Yang, M. T., and Griffin, J. H., "A Normalized Model Eigenvalue Approach for Resolving Model Interaction," Journal of Engineering for Gas Turbines and Power, Vol. 119, No. 3, 2001, pp. 647-650.
10. Yang, M. T., and Griffin, J. H., "A Reduced-Order Model of Mistuning Using a Subset of Nominal System Modes," Journal of Engineering for Gas Turbines and Power, Vol. 123, No. 4, 2001, pp. 893-900.
11. Feiner, D. M., and Griffin, G. H., "A Fundamental Model of Mistuning for a Single Family of Modes," Journal of Turbomachinery, Vol. 124, No. 4, 2002, pp. 597-605.
12. Petrov, E. P., Sanliturk, K. Y., and Ewins, D. J., "A New Method for Dynamic Analysis of Mistuned Bladed Disks Based on the Exact Relationship Between Tuned and Mistuned Systems," Journal of Engineering for Gas Turbines and Power, Vol. 124, No. 3, 2002, pp. 586-597.
13. Hall, K. C., "Deforming Grid Variational Principle for Unsteady Small Disturbance Flows in Cascades," AIAA Journal, Vol. 31, No. 5, 1993, pp. 891-900.
14. Hall, K. C., and Lorence, C. B., "Calculation of Three-Dimensional Unsteady Flows in Turbomachinery Using the Linearized Harmonic Euler Equations," Journal of Turbomachinery, Vol. 115, No. 4, 1993, pp. 800-809.
15. Chaviaropoulos, P. K., and Hansen, M. O. L., "Investigating Three-Dimensional and Rotational Effects on Wind Turbine Blades by Means of a Quasi-3D Navier-Stokes Solver," Journal of Fluids Engineering, Vol. 22, No. 2, 2000, pp. 330-336.
16. Fransson, T. H., Jöcker, M., Böles, A., and Ott, P., "Viscous and Inviscid Linear/Nonlinear Calculations Versus Quasi-Three-dimensional Experimental Cascade Data for a New Aeroelastic Turbine Standard Configuration," Journal of Turbomachinery, Vol. 121, No. 4, 1999, pp. 717-725.
17. Bell, D. L., and He, L., "Three-Dimensional Unsteady Flow for an Oscillating Turbine Blade and the Influence of Tip Leakage," Journal of Turbomachinery, Vol. 122, No. 1, 2000, pp. 93-101.
18. Kaza, K. R. V., and Kielb, R. E., "Flutter of Turbofan Rotors with Mistuned Blades," AIM Journal, Vol. 22, No. 11, 1984, pp. 1618-1625.
19. Kaza, K. R. V., and Kielò, R. E., "Vibration and Flutter of Mistuned Bladed-Disk Assemblies," Journal of Propulsion and Power, Vol. 1, No. 5, 1985, pp. 336-344.
20. Pierre, C., and Murthy, D., "Aeroelastic Model Characteristics of Mistuned Blade Assemblies: Mode Localization and Loss of Eigenstructure," AIAA Journal, Vol. 30, No. 10, 1992, pp. 2483-2496.
21. Pierre, C., Smith, T. E., and Murthy, D., "Localization of Aeroelastic Modes in Mistuned High-Energy Turbines," Journal of Propulsion and Power, Vol. 10, No. 3, 1994, pp. 318-328.
22. Sadeghi, M., and Liu, F., "Computation of Mistuning Effects on Cascade Flutter," AIM Journal, Vol. 39, No. 1, 2001, pp. 22-28.
23. Gerolymos, G. A., "Coupled Three-Dimensional Aeroelastic Stability Analysis of Bladed Disks," Journal of Turbomachinery, Vol. 115, No. 4, 1993, pp. 791-799.
24. Moyroud, F. G., Jacquet-Richardet, G.., and Fransson, T., "A Model Coupling for Fluid and Structure Analyses of Turbomachine Flutter: pplication to a Fan Stage," ASME Paper 96-GT-335, 1996, pp. 1-10.
25. Seinturier, E., Dupont, C., Berthillier, M., and Dumas, M, "A New Aeroelastic Model for Mistuned Bladed Disks," Proceedings of the 43rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference Vol. 4, AIAA, Reston, VA, 2002, pp. 2628-2638.
26. Kielb, R. E., Feiner, D. M., Griffin, J. H., and Miyakozawa, T., "Probabilistic Analysis of Mistuned Bladed Disks and Blisks with Aerodynamic and FMM. Structural Coupling," Proceedings of the 9th National Turbine Engine HCF Conference, Universal Technology Corporation, Dayton, OH, 2004, pp. 1-10.
27. Kielb, R. E., Feiner, D. M., Griffin, J. H., and Miyakozawa, T., "Flutter of Mistuned Bladed. Disks and Blisks with Aerodynamic and FMM Structural Coupling," Proceedings of ASME Turbo Expo 2004, Vol. 6, ASME, New York, 2004, pp. 573-579.
28. Cedar, R. D., and Stow, P., "The Addition of Quasi-Three-Dimensional Terms into a Finite Element Method for Transonic Turbomachinery Blade-to-Blade Flows," International Journal for Numerical Methods in Fluids, Vol. 5, No. 2, 1985, pp. 101-114.
29. Bateman, H., "Irrotational Motion of a Compressible Fluid," Proceedings of the National Academy of Sciences of the United States of America, Vol. 16, No. 12, 1930, pp. 816-825.
30. Horn, R., and Johnson, C., Topics in Matrix Analysis, Cambridge Univ. Press, Cambridge, England, 1991.
31. Fransson, T. H., and Verdon, J. M., "Updated Report on Standard Configurations for Unsteady Flow Through Vibrating Axial-Flow Turbomachine Cascades: Status as of July 1991," Tech. rept., Royal Institute of Technology, Stockholm, Sweden and United Technologies Research Center, East Hartford, CT, 1992, http://www.energy.kth.se/proj/projects/Markus%20Joecker/ STCF/STCF1to10/Documents/SC2110.92update.pdf [cited 19 Dec. 2006].
32. Epureanu, B. I., Dowell, E. H., and Hall, K. C., "Mach Number Influence on Reduced-Order Models of Inviscid Potential Flows in Turbomachinery," Journal of Fluids Engineering, Vol. 124, No. 4, 2002, pp. 977-987.
33. Allemang, R. J., "The Modal Assurance Criterion-Twenty Years of Use and Abuse," Journal of Sound and Vibration, Vol. 37, No. 8, 2003, pp. 14-23.