Resonance wood [Picea abies (L.) Karst.] - Evaluation and prediction of violin makers' quality-grading

Journal of the Acoustical Society of America

Volumn 121, Issue 4, 2007, Pages 2384-2395

  Buksnowitz, Christoph ^a   Teischinger, Alfred ^a   Müller, Ulrich ^b   Pahler, Andreas ^c   Evans, Robert ^d  

^a UNIVERSITY OF NATURAL RESOURCES AND LIFE SCIENCES   (Austria)

^b KOMPETENZZENTRUM HOLZ GMBH   (Austria)

^c TECHNICAL UNIVERSITY OF MUNICH   (Germany)

^d CSIRO   (Australia)

Author keywords

[No Author keywords available]

Indexed keywords

ACOUSTIC RESONATORS; NATURAL FREQUENCIES; WOOD;

EUROPEAN ALPS; KEYBOARD INSTRUMENTS; QUALITY GRADING; RESONANCE WOOD;

MUSICAL INSTRUMENTS;

ACOUSTICS; ARTICLE; COMPARATIVE STUDY; EUROPE; INSTRUMENT; KNOWLEDGE; MATERIALS; MEASUREMENT; MECHANICS; MULTIPLE LINEAR REGRESSION ANALYSIS; MUSIC; NORWAY SPRUCE; PREDICTION; PRIORITY JOURNAL; QUALITY CONTROL; SAMPLE; SOUND; STATISTICAL MODEL; WOOD;

ACOUSTICS; EQUIPMENT DESIGN; MODELS, THEORETICAL; MUSIC; PICEA; SOUND;

FREQUENCIES; INSTRUMENTS; MUSIC; PICEA ABIES; WOOD;

EID: 34047265994     PISSN: 00014966     EISSN: None     Source Type: Journal    
DOI: 10.1121/1.2434756     Document Type: Article

References (87)

1. Anderson, B. E., and Strong, W. J. (2005). "The effect of an inharmonic partial on pitch of pianos," J. Acoust. Soc. Am. 117, 3268-3272.
2. Ashby, M. F. (1999). Materials Selection in Mechanical Design (Butterworth/Heinemann, Oxford), ISBN 07506 4357 9, p. 202.
3. Bariska, M. (1978). "Klangholz, Holzinstrumente, Musik," ("Resonance wood, wooden instruments, music"), Naturwiss. Rundsch. 31, 45-52.
4. Beldan, E. C., and Pescaru, P. (1996). "Research on the acoustic quality classes of resonance spruce wood in Romania", Tenth International Symposium on Non-Destructive Testing of Wood, Lausanne Switzerland, August 26-28, pp. 43-52.
5. Beuting, M., and Klein, P. (2003). "Holzkundliche und dendrochronologische Untersuchungen an Resonanzholz," ("Wood- scientific and dendrochronological investigations on resonance wood"), annual report of the Bundesforschungsanstalt für Forst- und Holzwirtschaft, 71-72.
6. Biernacki, J. M., and Beall, F. C. (1993). "Development of an acoustoultrasonic scanning system for NDE of wood and wood laminates," Wood Fiber Sci. 25, 289-297.
7. Blossfeld, O., Haasemann, W., and Haller, K. (1962). "Klangholz und Klangholzsortierung," ("Sound wood and sound wood grading"), Sozial. Forstwirtsch. 12, 140-145.
8. Bodig, J., and Jayne, B. A. (1982). Mechanics of Wood and Wood Composites (Van Nostrand Reinhold, New York). ISBN 0-442-00822-8, p. 53.
9. Borchardt, G. (2004). Verbal communication in Cremona Italy, P.zza S.A.M. Zaccaria, 11.
10. Bosshard, H. H. (1982). Holzkunde. Band 1. Mikroskopie und Makroskopie des Holzes (Woodscience. Vol. I. Microscopy and Macroscopy of Wood), 2nd ed. (Birkhäuser, Stuttgart), ISBN 3-7643-1328-5, p. 83.
11. Bucur, V. (1983). "Vers une appréciation objective des propriétés des bois du violon." ("An attempt at an objective appreciation of the properties of wood for violins"), Revue-Forestiere-Francaise (France) 35, 130-137.
12. Bucur, V. (2006). Acoustics of Wood, 2nd ed., (Springer, New York) ISBN 1431-8563, Chap. 7.
13. Bucur, V., and Böhnke, I. (1994). "Factors affecting ultrasonic measurements in solid wood," Ultrasonics 32, 385-390.
14. Bucur, V., and Feeney, F. (1992). "Attenuation of ultrasound in solid wood," Ultrasonics 30, 76-81.
15. Bucur, V., Clément, A., Bitch, M., and Houssement, C. (1999). "Acoustic properties of resonance wood and distribution of inorganic components of the cell wall," Holz Roh-Werkst. 57, 103-104.
16. Buksnowitz, C. (2006). Resonance wood of Picea abies, Doctoral thesis - Institute of Wood Science and Technology, Vienna University of Natural Resources and Applied Life Sciences - BOKU, Vienna.
17. Burckle, L., and Grissino-Mayer, H. D. (2003). "Stradivari, violins, tree rings, and the Maunder Minimum: A hypothesis," Dendrochronologia. 21, 41-45.
18. Burmester, A. (1965). "Zusammenhang zwischen Schallgeschwindigkeit und morphologischen und mechanischen Eigenschaften von Holz," ("Correlation between sound velocity and morphological and mechanical wood properties"), Holz Roh-Werkst. 23, 227-236.
19. Burmester, A. (1968). "Untersuchungen über den Zusammenhang zwischen Schallgeschwindigkeit und Rohdichte, Querzug-sowie Biegefestigkeiten von Spanplatten," ("Investigations on the correlation between sound velocity and density, bending strength and tensile strength transversial to the fiber direction of particle boards"), Holz Roh-Werkst. 26, 113-117.
20. Den Hartog, J. P. (1985). Mechanical Vibration (Dover, New York) ISBN 0486647854.
21. DIN 52 033 (1979). "Farbmessung Grundbegriffe der Farbmetrik" ("Color measurement; basic terminology of color metrics"), German Institute for Standardization.
22. DIN 52 184 (1979). "Prüfung von Holz. Bestimmung der Quellung und Schwindung." ("Testing of wood; determination of swelling and shrinkage"), German Institute for Standardization.
23. DIN 52 185 (1976). "Prüfung von Holz. Bestimmung der Druckfestigkeit parallel zur Faser," ("Testing of wood; compression test parallel to grain"), German Institute for Standardization.
24. DIN 52 186 (1978). "Prüfung von Holz. Biegeversuch," ("Testing of wood; bending test"), German Institute for Standardization.
25. DIN 52 188 (1979). "Prüfung von Holz. Bestimmung der Zugfestigkeit parallel zur Faser," ("Testing of wood; determination of ultimate tensile stress parallel to grain"), German Institute for Standardization.
26. DIN 6721-1 (2003). "Kunststoffe. Bestimmung dynamisch-mechanischer Eigenschaften. Teil 1: Allgemeine Grundlagen," ("Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2001)"), German Institute for Standardization.
27. DIN 6721-3 (1996). "Kunststoffe. Bestimmung dynamisch-mechanischer Eigenschaften. Teil 3: Biegeschwingung Resonanzkurven-Verfahren." ("Plastics - Determination of the dynamic mechanical properties - Part 3: Flexural vibration, Resonance curve (ISO 621-3: 1994)"), German Institute for Standardization.
28. Evans, R. (1994). "Rapid measurement of the transverse dimensions of tracheids in radial wood sections from Pinus radiate," Holzforschung 48, 168-172.
29. Evans, R. (1999). "A variance approach to the x-ray diffractometric estimation of microfibril angle in wood," Appita J. 52, 283-289.
30. Evans, R., and llic, J. (2001). "Rapid prediction of wood stiffness from microfibril angle and density," For. Prod. J. 51, 53-57.
31. Evans, R., Hughes, M., and Menz, D. (1999). "Microfibril angle variation by scanning x-ray diffractometry," Appita J. 52, 363-367.
32. Evans, R., Stuart, S. A., and Van der Touw, J. (1996). "Microfibril angle scanning of increment cores by x-ray diffractometry," Appita J. 49, 411-414.
33. Feuerstein, A. (1935). "Das Klangholz," ("Resonance wood"), Forstwiss. Centralbl. 57, 617-624.
34. Gindl, W., Hansmann, C., Notgurga, G., Schwanninger, M., Hinterstoisser, B., and Jeronimidis, G. (2004): "Using water-soluble melaminformaldehyd resin to improve the hardness of Norway spruce wood." J. Appl. Polym. Sci., 93(4), 1900-1907.
35. Gough, C. (2000). "Science and the Stradivarius," Physics World, April 2000, http://physicsweb.org/article/world/13/4/8/1.
36. Grabner, M., and Wimmer, R. (2006). "Variation of different tree-ring parameters in samples from each terminal shoot of a Norway spruce tree," Dendrochronologia. 23, 111-120.
37. Gureyev, T. E., and Evans, R. (1999). "A method for measuring vessel-free density distribution in hardwoods," Wood Sci. Technol. 33, 31-42.
38. Hearmon, R. F. S. (1948). The Elasticity of Wood and Plywood (For. Prod. m. Res. Spec. Rep. No. 7, London).
39. Holz, D. (1966). "Untersuchungen an Resonanzhölzern. 1. Mitteilung: Beurteilung von Fichtenresonanzhölzern auf der Grundlage der Rohdichteverteilung und der Jahrringbreite," ("Research on resonance wood: Part 1: Quality assessment on the basis of density distribution and tree ring width"), Arch. Forstwes. 15, 1287-1300.
40. Holz, D. (1967). "Untersuchungen an Resonanzholz. 3. Mitteilung: Über die gleichzeitige Bestimmung des dynamischen Elastizitätsmoduls und der Dämpfung an Holzstäben im hörbaren Frequenzbereich," ("Research on resonance wood: Part 3: Simultanious determination of the dynamic modulus of elasticity and damping on wooden rods in the audible frequency range"), Holztechnologie 8, 221-224.
41. Holz, D. (1972). "Zur Beurteilung von Resonanzhölzern und einigen vergleichbaren Austauschstoffen durch Messungen akustisch wichtiger Eigenschaften," ("Evaluation of resonance wood and comparable substitutes by measurements of acoustical properties"), Dissertation TU-Dresden. Holtechnol. 14, (1973), 113-114.
42. Holz, D. (1973). "Untersuchungen an Resonanzholz. 5. Mitteilung: Über bedeutsame Eigenschaften nativer Nadel- und Laubhölzer im Hinblick auf mechanische und akustische Parameter von Piano-Resonanzböden," ("Research on resonance wood: Part 5: Quality assesment on the basis of density distribution and tree ring width"), Holztechnologie 14, 195-202.
43. Holz, D. (1984). "Über einige Zusammenhänge zwischen forstlichbiologischen und akustischen Eigenschaften von Klangholz (Resonanzholz )," ("On relations between biological and acoustical properties of resonance wood"), Holztechnologie 25, 31-36.
44. Holz, D. (1996). "Comments on: Chemical treatment of wood for musical instrument," J. Acoust. Soc. Am. 99, 1795-1796.
45. Holz, D. (2000). "Die Birke als Klangholz," ("Birch as resonance wood"), Bayrische Landesanst. f. Wald Forstwirts. LWF-Bericht Nr. 28, 92-98.
46. Hori, R., Wantanabe, U., Müller, M., Lichtenegger, H. C., Frazl, P., and Sugiyama, J. (2002). "The importance of seasonal differences in the cellulose microfibril angle in softwoods in determining acoustic properties," J. Mater. Sci. 37, 4279-4284.
47. Hutchins, C. M. (1992). "A 30-year experiment in the acoustical and musical development of violin-family instruments," J. Acoust. Soc. Am. 92, 639-650.
48. Ille, R. (1975). "Eigenschaften und Verarbeitung von Fichtenresonanzholz für Meistergeigen," ("Properties and processing of Norway spruce resonance wood for masters' instruments"), Holztechnologie 16, 95-101.
49. Ille, R. (1976). "Eigenschaften und Verarbeitung von Fichtenresonanzholz für Meistergeigen (II)," ("Properties and processing of Norway spruce resonance wood for masters' instruments - Part II") Holztechnologie 17, 32-35.
50. Jeffrey, E. C. (1917). "The Anatomy of Woody Plants" (University of Chicago Press, Chicago).
51. Joppig, G. (2003). "In Schwingung versetzt Hölzer im Instrumentenbau," ("Wood in musical instrument making"), Zeitschr. Zuschnitt. 12, 22ff.
52. Kollmann, F. (1951/82). Technologie des Holzes und der Holzwerkstoffe (Technology of solid wood and wooden materials) (Springer-Verlag, Berlin ). ISBN 3-540-11778-4, pp. 549, 552, 607.
53. Kollmann, F. (1983). "Holz und Schall - Theorie und Nutzanwendung," ("Wood and sound - theorie and applications"), Holz-Zentralbl. 109, 201-202.
54. Kollmann, F., and Côté, W. A. (1969). Principles of Wood Science and Technology. Solid Wood. (Springer, Berlin), Chap. 7, pp. 294, 276.
55. Kollmann, F., and Krech, H. (1960). "Dynamische Messungen der elastischen Holzeigenschaften und der Dämpfung," ("Dynamic measurements of elastic wood properties and damping"), Holz Roh-Werkst. 18, 41-54.
56. Koponen, T., Peura, M., Karppinen, T., Hæggström, E., Müller, M., Saranpää, P., and Serimaa, R. (2004). "Elastic properties and cell wall structure of Norway spruce as a function of year ring," Proceedings of the Second International Symposium on Wood Machining, Vienna, Austria, pp. 53-59.
57. Kucera, L. J., Niemz, P., and Fliesch, A. (1998). "Vergleichende Messungen zur Ermittlung der Eigenschaften von Fichtenholz mittels Eigenfrequenz und Schallgeschwindigkeit," ("Comparative measurements to determine Norway spruce wood properties using resonance frequency and sound velocity"), Holzforsch. Holzverwert. 5, 96-99.
58. Macdonald, J. R. (1966). "Energy dissipation and attenuation under high-loss conditions," Br. J. Appl. Phys. 17, 1347-1354.
59. Mombächer, R. (1988). Holzlexikon. Nachschlagewerk für die Holz- und Forstwirtschaft (Wood encyclopaedia), (DRW-Verlag). ISBN 3-87181-318-4, p. 133.
60. Niemz, P. (1993). Physics des Holzes und der Holzwerkstoffe. ("Physics of solid wood and wooden materials"), (DRW, Leinfeld-Echterdingen), ISBN 3-87181-324-9, Chap. 8, pp. 111, 119.
61. Niemz, P., Kucera, L. J., and Pöhler, E. (1997). "Vergleichende Untersuchungen zur Bestimmung des dynamischen E-Moduls mittels Schall-Laufzeit- und Resonanzfrequenzmessung," ("Comparative measurements to determine the dynamic modulus of elasticity using sound velocity and resonance"), Holzforsch. Holzverwert. 5, 91-93.
62. ÖNORM B 3012 (2003). "Wood species - Characteristic values to terms and symbols of ÖNORM EN 13556." (Austrian Standards Institute, Zwota).
63. ÖNORM EN 1534 (2000). "Parkett und andere Hölzfussböden. Bestimmung des Eindruckwiderstandes (Brinell). Prüfmethode." ("Wood parquet flooring - Determination of resistence to indentation (Brinell) - Test Method") (Austrian Standards Institute, Zwota).
64. Rajcan, E. (1991). "Die physikalisch-akustischen Charakteristiken von Holz als Material für die Produktion von Streichinstrumenten," ("Physical and acoustical characteristics of wood as raw material for the manufacturing of bowed instruments,") Instrumentenbau-Zeit 53, 44-45.
65. Ramagnoli, M., Bernabei, M., and Codipietro, G. (2003). "Density variations in spruce wood with indented rings (Picea abies)," Holz Roh-Werkst. 61, 311-312.
66. Romanillos, J. L. (1998). Antonio De Torres: Guitar Maker - His Life and Work (Kahn and Averill, London) ISBN 0933224931.
67. Sakai, H., Minimisawa, A., and Takagi, K. (1990). "Effect of moisture content on ultrasonic velocity and attenuation in woods," Ultrasonics 28, 382-385.
68. Saranpää, P., Serimaa, R., Anderson, S., Pesonen, E., Suni, T., and Paakkari, T. (1997). "Variation of microfibril angle of Norway spruce [Picea abies (L.) Karst.] and Scots pine (Pinus silvestris L.) - comparing x-ray diffraction and optical methods," Proceedings of the IAWA/IUFRO Int. Workshop "Significance of Microfibril Angle to Wood Quality," Westport, New Zealand.
69. Schnur, K. (1985). "Klangholzanalysen," ("Resonace wood analysis,") Das Musikinstrumentenheft. 8, 61-63.
70. Schultze-Dewitz, G. (1959). "Variation und Häufigkeit der Faserlänge der Fichte," ("Variation and frequency of tracheid lengths in norway spruce"), Holz Roh-Werkst. 17, 316-326.
71. Schumacher, R. T. (1988). "Compliances of wood for violin plates," J. Acoust. Soc. Am. 84, 1223-1235.
72. Schwalbe, C., and Becker, E. (1920). "Chemische Untersuchung des Holzes einer alten Amatigeige," ("Chemical investigations on wood of an original Amati violin"), Z. Angew. Chem. 33, 272.
73. Schwalbe, C., and Schepp, R. (1925). "Zur Kenntnis des alten Italienischen Geigenholzes," ("Ancient Italian violin resonance wood") Z. Angew. Chem. 38, 965-966.
74. Sell, J. (1989). Eigenschaften und Kenngrössen von Holzarten. (Properties and Material Characteristics of Wood Species), (Baufachverlag, Lignum). ISBN 3-85565-223-6, p. 34.
75. Stuart, S. A., and Evans, R. (1995). "X-ray diffraction estimation of the microfibril angle variation in eucalypt wood," Appita J. 48, 197-200.
76. TGL 15799/12, (1982). "Fachbereichstandard der DDR. Rohholz, Bootsbauholz, Zündwarenholz," ("Standard of the DDR").
77. Treu, A., and Hapla, F. (2000). "Untersuchung der Qualität von Fichten- und Tannenklangholz," ("Investigations on the quality of Norway spruce and Fir resonance wood"), Allg. Forst-Jagdztg. 171, 215-222.
78. Wagenführ, A., Pfriem, A., and Eichelberger, K. (2005). "Einfluss einer thermischen Modifikation von Holz auf im Musikinstrumentenbau relevante Eigenschaften. Teil 1: Spezielle anatomische und physikalische Eigenschaften," ("Influence of thermal modification on wood properties relevant for musical instrument making-Part 1: Specific anatomical and physical properties"), Holztechnologie 46, 36-42.
79. Wagenführ, R. (1984). Anatomie des Holzes, (Wood Anatomy), (VEB Fachbuchverlag, Leipzig), pp. 153-154.
80. Wagenführ, R. (1996). Holzatlas, (Wood Encyclopedia), (Fachbuchverlag, Leipzig). ISBN 3-446-00900-0, pp. 177-178.
81. Washusen, R., Ades, P., Evans, R., Ilic, J., and Vinden, P. (2001). "Relationship between density, shrinkage, extractives content and microfibril angle in tension from three provenances of 10-year-old Eucalyptus globules Labill.," Holzforschung 55, 176-182.
82. Yano, H., Kajita, H., and Minato, K. (1994). "Chemical treatment of wood for musical instruments," J. Acoust. Soc. Am. 96, 3380-3391.
83. Ziegenhals, G. (1999). "Ermittlung von Auswahlkriterien für Resonanzholz," ("Selection criteria for resonance wood"), Projekt Report - Institute für Musikinstrumentenbau Zwota.
84. Ziegenhals, G. (2001). "Resonanzholzmerkmale von Gitarrendecken," ("Resonance wood properties"), Fachausschuss Musikalische Akustik in der DEGA, Sept. 2001, 20-23.
85. Zieger, E. (1960). "Untersuchungen über äußere Merkmale, Holzeigenschaften und forstgeographische Vorkommen der Resonanzholzqualitäten bei Fichte und einigen anderen Holzarten," ("Investigations on outer characteristics, wood properties and provenances of resonance wood qualities of Norway spruce and some other species"), Mitt. aus der Staatsforstverwaltung Bayern. 31, 285-298.
86. Ziegler, H., and Merz, W. (1961). "Der Haselwuchs; Über die Beziehung zwischen unregelmäßigem Dickenwachstum und Markstrahlverteilung," ("Hazel growth: Relation between irregular radial growth and xylem ray distribution"), Holz Roh-Werkst. 19, 1-8.
87. Zimmermann, U. (1996). "Anforderungen an das Klangholz," ("Requirements for resonance wood"), Schweizer. Zeitschr. f. d. Forstwesen. 9, 695-702.