Laser irradiation of AISI 316L stainless steel coated with Si3N4 and Ti

Optics and Laser Technology

Volumn 39, Issue 8, 2007, Pages 1504-1513

  Viswanathan, A ^a   Sastikumar, D ^a   Rajarajan, P ^a   Kumar, Harish ^b   Nath, A K ^b  

^a NATIONAL INSTITUTE OF TECHNOLOGY   (India)

^b RAJA RAMANNA CENTRE FOR ADVANCED TECHNOLOGY   (India)

Author keywords

Laser surface modification; Si3N4 Ti coating; Ti5Si3 reinforcement

Indexed keywords

CORROSION RESISTANCE; ENERGY DISPERSIVE SPECTROSCOPY; LASER BEAM EFFECTS; SILICON COMPOUNDS; SURFACE MORPHOLOGY; SURFACE TREATMENT; X RAY DIFFRACTION ANALYSIS;

AUSTENITIC STRUCTURE; LASER POWER; LASER-PROCESSING PARAMETERS; SURFACE HARDNESS;

STAINLESS STEEL;

EID: 34047248029     PISSN: 00303992     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.optlastec.2007.01.004     Document Type: Article

References (32)

1. Chaing K.A., and Chen Y.C. Microstructure characterisation and microscopy analysis of laser cladding stellite 12 and tungsten carbide. J Mater Process Technol 182 (2007) 297-302
2. Dubourg L., Ursescu D., Hlawka F., and Conet A. Laser cladding of MMC coatings on aluminium substrate: influence of composition and microstructure on mechanical properties. Wear 258 (2005) 1745-1754
3. Tain Y.S., Chen C.Z., Chen L.B., and Chen L.X. Study on the microstructure and wear resistance of the composite coatings fabrication on Ti-6Al-4V under different processing conditions. Appl Surf Sci 253 (2006) 1494-1499
4. 2 laser. Mater Charact 52 4-5 (2006) 341-348
5. Tassin C., Laroudie F., and Pons M. Improvement of the wear resistant of 316L stainless steel by laser surface alloying. Surf Coat Technol 80 (1996) 207-210
6. Chang F.T., Lo K.H., and Man H.C. A Preliminary study of laser cladding of AISI 316 stainless steel using preplaced NiTi wire. Mater Sci Eng A 380 (2004) 20-29
7. Glaeser W.A. Materials for tribology. Tribology Series 20 (1992), Elsevier, New York
8. 3 (Al, Ti, C) wear-resistant intermetallic matrix composite coatings. Mater Lett 57 (2006) 2029-2036
9. Lo K.H., Chang F.T., Kwok C.T., and Man H.C. Improvement of cavitation erosion resistance of AISI 316L stainless steel by laser surface alloying using fine WC powder. Surf Coat Technol 165 (2003) 258-307
10. 2 and Ni-WC for improving erosive-corrosive wear performance. Surf Coat Technol 190 (2005) 212-217
11. Man H.C., Yang Y.Q., and Lee W.B. Laser induced reaction synthesis of TiC+WC reinforced metal matrix composite coatings on Al6061. Surf Coat Technol 185 (2004) 74-80
12. 2/SiC composite coating on pure Al by laser cladding. Mater Lett 57 (2003) 3412-3416
13. Yang S., Zhong M., and Liu W. TiC particulate composite coating produced in situ by laser cladding. Mater Sci Eng A 343 (2003) 57-62
14. Dutta Majumdar J., Mordike B.L., and Manna Y. Friction and wear behaviour of Ti following laser surface alloying with Si, Al and Si+Al. Wear 242 (2000) 18-27
15. 2 intermetallic composite coating on titanium alloy. Mater Sci Eng A 338 (2002) 126-132
16. 3/γ/TiSi composite coatings on γ-TiAl intermetallic alloy. Surf Coat Technol 200 (2006) 4462-4470
17. Parlapanska S., and Parlapanki D. Corrosion behaviour of mechanically alloyed Ti-Si samples. Corrosion Sci 39 7 (1997) 1321-1327
18. Tsai W.-T., Lai T.-H., and Lee J.-T. Laser surface alloying of stainless steel with silicon nitride. Mater Sci Eng A 183 (1994) 239-245
19. 2 laser. Mater Charact 52 (2004) 341-348
20. Kwok C.T., Cheng F.T., and Man H.C. Laser surface modification of UNS S31603 stainless steel, Part I: microstructure and corrosion characteristics. Mater Sci Eng A 290 (2006) 55-73
21. Wang A.H., Xie C.S., and Nie J.H. Microstructural characteristics of iron-based alloy laser clad on Al-Si alloy. Mater Sci Technol 15 (1999) 957-964
22. Fischer P., Romano V., Weber H.P., Karaptis N.P., Boillat E., and Glardon R. Sintering of commercially pure titanium powder with a Nd:YAG laser source. Acta Mater 51 (2003) 1651-1662
23. 2 laser nitriding as a result of Ti Coating modification in a nitrogen atmosphere, Part I: features of nitriding process. Laser Eng 4 (1995) 85-96
24. Senthil Selven J., Soundarajan G., and Subramanian K. Laser alloying of aluminium with electrodeposited nickel: optimisation of plating thickness and processing parameters. Surf Coat Technol 124 (2000) 117-127
25. 2 laser. Opt Laser Eng 38 (2002) 279-289
26. Das D.K. Surface roughness by laser surface alloying of aluminium with nickel. Surf Coat Technol 64 (1994) 11-15
27. Yang S., Liu W., Zhong M., and Wang Z. TiC reinforced composite coating produced by powder feeding laser cladding. Mater Lett 58 (2004) 2958-2962
28. Anjos M.A., Vilar R., Li R., Ferreira M.G., Steen W.M., and Watkins K. Fe-Cr-Ni-Mo-C alloys produced by laser surface alloying. Surf Coat Technol 70 (1995) 235-242
29. Lo K.H., Cheng F.T., Kwok C.T., and Man H.C. Improvement of cavitation erosion resistance of AISI 316 stainless steel by laser surface alloying using fine WC power. Surf Coat Technol 165 (2003) 258-267
30. Senthil Selvan J., and Subramanian K. High-temperature thermal barrier coating formation by laser alloying of CP-Ti with pre-placed Ni-SiC coating. J Mater Sci 38 (2003) 4783-4801
31. Ziegler A., Idrobo J.C., Cinibulk M.K., Kisielowski C., Browning N.D., and Ritchie R.O. Interface structure and atomic bonding characteristics in silicon nitride ceramics. Science 306 5702 (2004) 1768-1770
32. Zhong M., Liu W., and Zhang H. Corrosion and wear resistance characteristics of NiCr coating by laser alloying with powder feeding on grey iron liner. Wear 260 (2006) 1349-1355