Studies on polycarbonate and polydimethylsiloxane rubber blends

Polymer - Plastics Technology and Engineering

Volumn 46, Issue 4, 2007, Pages 427-433

  Kumar, Sandeep ^a   Maiti, S N ^b  

^a BIRLA INSTITUTE OF TECHNOLOGY   (India)

^b INDIAN INSTITUTE OF TECHNOLOGY DELHI   (India)

Author keywords

[No Author keywords available]

Indexed keywords

BLENDING; CRAZING; IMPACT STRENGTH; MECHANICAL TESTING; PHASE STRUCTURE; PLASTICS EXTRUDERS; POLYCARBONATES; POLYDIMETHYLSILOXANE; RUBBER;

MELT BLENDING; TWIN-SCREW EXTRUDER;

POLYMER BLENDS;

BLENDING; CRAZING; IMPACT STRENGTH; MECHANICAL TESTING; PHASE STRUCTURE; PLASTICS EXTRUDERS; POLYCARBONATES; POLYDIMETHYLSILOXANE; POLYMER BLENDS; RUBBER;

ELECTRICAL PROPERTY; EXTRUSION; GLASS TRANSITION TEMPERATURE; MECHANICAL PROPERTY; MORPHOLOGY; POLYCARBONATE; POLYDIMETHYLSILOXANE; POLYMER BLEND; SCANNING ELECTRON MICROSCOPY; STRENGTH; TENSILE PROPERTY; TESTING; THERMAL PROPERTY;

EID: 33947715282     PISSN: 03602559     EISSN: 15256111     Source Type: Journal    
DOI: 10.1080/03602550701244634     Document Type: Article

References (41)

1. Liu, Z. H., Kwok, K. W. and Choy, C. L. (2002) Polymer, 43, p. 2501.
2. Tjong, S. C. and Meng, Y. Z. (2000) Eur. Polym. J., 36, p. 123.
3. Jana, R. N., Mukunda, P. G. and Nando, G. B. (2003) Polym. Degrad. Stabil., 80, p. 75.
4. Wang, K., Wu, J. and Zeng, H. (2001) Comp. Sci. Tech., 61, p. 1529.
5. Gamie, B., Dana, F. and Delunaj, D. (1992) Calorim. Anal. Them., 23, p. 213.
6. Walid, S. A. and Winding, C. C. (1971) Polym. Eng. Sci., 11, p. 57.
7. Arends, B. and Charles, B. Arends (1996) Polymer Toughening, p. 4. Marcel Dekker, New York
8. Mark, H. F., Bikales, N. M. and Mengers, G. (1986) Mengers Encyclopedia of Polym. Sci. Eng., 3, p. 758.
9. Morton, M. (1987) Rubber Technology, p. 375. Van Nostrand Reinhold Company, New York
10. Runt, J. P., Zhang, X., Milay, D. M., Gallagher, K. P. and Zhang, A. (1992) Macromolecules, 25, p. 3902.
11. Oevaux, J., Godard, P. and Mercier, J. P. (1982) J. Polym. Sci. Polym. Phys., 20, p. 1875.
12. William, M. W. and Kamisky, K. L. (1981)
13. Brinke, J.W. ten, Debnath, S. C., Reuvekamp, L. A. E. M. and Noordermeer, J. W. M. (2003) Compo. Sci. Tech., 63, p. 1165.
14. Utracki, L. A. (1998) Commercial Polymer Blends, p. 118. Chapman and Hall, London
15. Xhaoqin, L. C., Guohua, T. and Zhang, Y. (2002) Polymer, 21, p. 919.
16. (1990) Analysis and Performance of Fiber Composites, John Wiley &Sons, New York
17. Cohen, L. J. and Ishai, O. (1963) J. Compos. Mater., 1, p. 399.
18. Katz, H. S. and Milewski, J. V. (1987) Handbook of Fillers and Reinforcements of Plastics, Van Nostrand Reinhold, New York
19. Jancar, J., Anselmo, A. Di, Benedetto, A.T. Di and Kucera, J. (1993) Polymer, 34, p. 1684.
20. Maiti, S. N., Barman, N. and Gupta, A. K. (2005) Intern. J. Polym. Mater., 54, pp. 467-482.
21. Pukanszky, B., Tudos, F., Kallo, A. and Bodor, G. (1989) Polymer, 30, p. 1407.
22. Chiang, W. -Y., Yang, W. -D. and Pukanszky, B. (1992) Polym. Eng. Sci., 32, p. 641.
23. Gupta, A. K. and Purwar, S. N. (1985) J. Appl. Polym. Sci., 30, p. 1799.
24. Gupta, A. K. and Purwar, S. N. (1984) J. Appl. Polym. Sci., 29, p. 3513.
25. Maiti, S. N. and Sharma, K. K. (1992) J. Mater. Sci., 27, p. 4605.
26. Piggot, M. R. and Leidner, J. (1974) J. Appl. Polym. Sci., 18, p. 1619.
27. Kunori, T. and Geil, P. H. (1980) J. Macromol. Sci. Phys. B., 18, p. 135.
28. Ramsteiner, F. and Theyson, R. (1984) Composites, 15, p. 121.
29. Nielsen, L. E. (1966) J. Appl. Polym. Sci., 10, p. 97.
30. Nicodemo, L. and Nicolais, L. (1983) Mater. Sci. Lett., 2, p. 201.
31. Maiti, S. N. and Subbarao, R. (1991) Int. J. Polym. Mater., 15, p. 1.
32. Passmore, E. M., Spriggs, R. M. and Vasilos, T. J. (1965) J. Amer. Ceram. Soc., 48, p. 1.
33. Nielsen, L. E. (1967) J. Compos. Mater., 1, p. 100.
34. Mitsuishi, K., Kodama, S. and Kawasaki, H. (1995) Polym. Eng. Sci., 25, p. 1069.
35. Wang, Y. and Jiang, S. (1996) J. Appl. Polym. Sci., 60, p. 1779.
36. Bucknall, C. B. (1977) Toughened Plastics, Applied Science, London
37. Dwyer, S. M., Boutni, O. M. and Shu, C. (1996) Polypropylene Handbook, Hanser, New York
38. Bhattacharya, A. R. (2000), IIT Delhi, New Delhi
39. (1996) Image Processing and Analysis System, Leica Qwin User Guide, Cambridge
40. Brydson, J. A. (1999) Plastics Materials, Butterworth-Heinemann, Oxford
41. Silverstein, R. M., Bassler, G. C. and Morrill, T. C. (1981) Spectometric Identification of Organic Compounds, p. 45-58. John Wiley & Sons, New York