Analysis of creep deformation and creep damage in thin-walled branched shells from materials with different behavior in tension and compression

International Journal of Solids and Structures

Volumn 44, Issue 16, 2007, Pages 5075-5100

  Zolochevsky, A ^a   Galishin, A ^b   Sklepus, S ^c   Voyiadjis, G Z ^d  

^a NORWEGIAN UNIVERSITY OF SCIENCE AND TECHNOLOGY   (Norway)

^b S P TIMOSHENKO INSTITUTE OF MECHANICS   (Ukraine)

^c Institute of Mechanical Engineering Problems   (Ukraine)

^d LOUISIANA STATE UNIVERSITY   (United States)

Author keywords

Asymmetric effect; Branched shell; Constitutive equation; Creep; Creep damage

Indexed keywords

BOUNDARY VALUE PROBLEMS; CONSTITUTIVE EQUATIONS; CREEP; DEFORMATION; NUMERICAL METHODS; ORDINARY DIFFERENTIAL EQUATIONS;

ASYMMETRIC EFFECT; BRANCHED SHELLS; CREEP DAMAGE; CREEP DEFORMATION;

SHELLS (STRUCTURES);

EID: 33947711684     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2006.12.019     Document Type: Article

References (83)

1. Altenbach H., and Naumenko K. Creep bending of thin-walled shells and plates by consideration of finite deflections. Comp. Mech. 19 (1997) 490-495
2. Altenbach H., and Zolochevsky A. Creep of thin shells in consideration of the anisotropic materials and the different behavior in tension and compression. Forsch. Ingenieurwesen 57 (1991) 172-179
3. Altenbach H., Altenbach J., and Zolochevsky A. Erweiterte Deformationsmodelle und Versagenskriterien der Werkstoffmechanik (1995), Deutscher Verlag für Grundstoffindustrie, Stuttgart
4. Ashby M.F., and Brown L.M. Perspectives in Creep Fracture (1983), Pergamon, Oxford
5. Bathe K.J. Finite Elements Procedures (1996), Prentice-Hall, Englewood Cliffs, NY
6. Bellenger E., and Bussy P. Phenomenological modeling and numerical simulation of different modes of creep damage evolution. Int. J. Solids Struct. 38 (2001) 577-604
7. Betten J. Creep Mechanics (2002), Springer-Verlag, Berlin
8. Betten J., and Borrmann M. Stationäres Kriechverhalten innendruckbelasteter dünnwandiger Kreiszylinderschalten unter Berücksichtigung des orthotropen Werkstoffverhaltens und des CSD-Effects. Forsch. Ingenieurwesen 53 (1987) 75-82
9. Betten J., Sklepus S., and Zolochevsky A. A creep damage model for initially isotropic materials with different properties in tension and compression. Eng. Fracture Mech. 59 (1998) 623-641
10. Betten J., Sklepus S., and Zolochevsky A. A microcrack description of creep damage in crystalline solids with different behaviour in tension and compression. Int. J. Damage Mech. 8 (1999) 197-232
11. Betten J., Sklepus A., and Zolochevsky A. A constitutive theory for creep behavior of initially isotropic materials sustaining unilateral damage. Mech. Res. Commun. 30 (2003) 251-256
12. Boyle J.T., and Spence J. Stress Analysis for Creep (1983), Butterworths, London
13. Chaboche J.-L., and Cailletaud G. Integration methods for complex plastic constitutive equations. Comput. Methods Appl. Mech. Eng. 133 (1996) 125-155
14. Chan K.S., Lankford J., and Page R.A. Viscous cavity growth in ceramics under compressive loads. Acta Metall. 32 (1984) 1907-1914
15. Chen I.W., and Argon A.S. Creep cavitation in 304 stainless steel. Acta Metall. 29 (1981) 1321-1333
16. Chen G.G., and Hsu T.R. A mixed explicit-implicit (El) algorithm for creep stress analysis. Int. J. Numerical Methods Eng. 26 (1988) 511-524
17. Cocks A.C.F., and Ashby M.F. Creep fracture by coupled power-law creep and diffusion under multiaxial stress. Met. Sci. 16 (1982) 465-474
18. El-Shennawy M., Morita Y., and Kouso M. Analytical and experimental investigation for tensile and compressive creep of the A3003P aluminium alloy used for plate-fin heat exchanger. JSME Int. J. 42A (1999) 403-413
19. Evans H.E. Mechanisms of Creep Fracture (1984), Elsevier Applied Science, London
20. Flügge W. Stresses in Shells (1973), Springer-Verlag, Berlin
21. Godunov S.K. Numerical solution of boundary value problems for systems of linear ordinary differential equations. Uspechi Mat. Nauk 16 (1961) 171-174
22. Gorev B.V., Rubanov V.V., and Sosnin O.V. Creep of materials with different properties in tension and compression. In: Pisarenko G.S. (Ed). Strength of Materials and Structural Members under Multiaxial Loading (1978), Naukova Dumka, Kiev 223-231
23. Gorev B.V., Rubanov V.V., and Sosnin O.V. Construction of creep equations for materials with different properties in tension and compression. J. Prikl. Mech. Tech. Phys. 4 (1979) 121-128
24. Grigolyuk E.I., and Shalashilin V.I. Problems of Nonlinear Deformation: The Computational Method Applied to Nonlinear Problems in Solid Mechanics (1991), Kluwer, Dordrecht
25. Hayhurst D.R. Creep rupture under multi-axial states of stress. J. Mech. Phys. Solids 20 (1972) 381-390
26. Hayhurst D.R. Discussion on the paper: "Generalised structural models in creep mechanics" by Boyle, J.T., Spence, J. In: Ponter A.R.S., and Hayhurst D.R. (Eds). Creep in Structures (1981), Springer-Verlag, Berlin 247
27. Hayhurst D.R., Dimmer P.R., and Chernuka M.W. Estimates of the creep rupture lifetime of structures using the finite element method. J. Mech. Phys. Solids 23 (1975) 335-355
28. Hayhurst D.R., Trampczynski W.A., and Leckie F.A. Creep rupture under non-proportional loading. Acta Metall. 28 (1980) 1171-1183
29. Hayhurst D.R., Dimmer P.R., and Morrison G.J. Development of continuum damage in the creep rupture of notched bars. Trans. R. Soc. Lond. A 311 (1984) 103-129
30. Hostert, B., 1975. Beitrag zum Kriechverhalten von Al 99,98 unter Druck-und Zugbeanspruchung. Ph.D. thesis, RWTH Aachen.
31. Hyde T.H., Xia L., and Becker A.A. Prediction of creep failure in aeroengine materials under multi-axial stress states. Int. J. Mech. Sci. 38 (1996) 385-403
32. Hyde, T.H., Sun, W., Leen, S.B., Rayner, G., 2003. FE analysis of the creep of branched pipes, In: Banks, W.M., Nash, D.H. (Eds.), Proceeding of the Conference on Pressure Equipment Technology: Theory and Practice. Glasgow, pp. 41-66.
33. Kassner M.E., and Hayes T.A. Creep cavitation in metals. Int. J. Plast. 19 (2003) 1715-1748
34. Kawai M. Constitutive modeling of creep and damage behaviors of the non-Mises type for a class of polycrystalline metals. Int. J. Damage Mech. 11 (2002) 223-246
35. Kaz Sh.N. Investigation of stress-rupture strength of pipes made from carbon steels. Teploenergetika 11 (1955) 37-40
36. Khojasteh-Vahabzadeh, M.T., 1991. Beitrag zum Zug- und Druckkriechverhalten von Ti 99,9 und TiA16V4. Ph.D. thesis, RWTH Aachen.
37. Kojic M., and Bathe K.J. Thermo-elastic-plastic and creep analysis of shell structures. Comput. Struct. 26 (1987) 135-143
38. Kraus H. Creep Analysis (1980), John Wiley and Sons, NY
39. Kumar V., Morjaria M., and Mukherjee S. Numerical integration of some stiff constitutive models of inelastic deformation. Trans. ASME. J. Eng. Mater. Technol. 102 (1980) 92-96
40. Lemaitre J., and Chaboche J.-L. Mechanics of Solid Materials (1990), Cambridge University Press, Cambridge
41. Ling L., Tu S.-T., and Gong J.-M. Application of Runge-Kutta-Merson algorithm for creep damage analysis. Int. J. Press. Vessel Piping 77 (2000) 243-248
42. Lucas G.E., and Pelloux R.M.N. Texture and stress state dependent creep in Zircaloy-2. Met. Trans. 12A (1981) 1321-1331
43. Mahnken R. Creep simulation of asymmetric effects by use of stress mode dependent weighting functions. Int. J. Solids Struct. 40 (2003) 6189-6209
44. Miuazaki N. Creep buckling analysis of circular cylindrical shells under axial compression-bifurcation buckling analysis by the finite element method. Trans. ASME. J. Press. Vessel Technol. 109 (1987) 179-183
45. Morachkovskii O.K., and Zolochevskii A.A. Effect of initial orthotropy of material on the creep of shell structures. Sov. Appl. Mech. 16 (1980) 478-482
46. Murakami S., and Liu Y. Mesh-dependence in local approach to creep fracture. Int. J. Damage Mech. 4 (1995) 230-250
47. Murakami S., Liu Y., and Mizuno M. Computational methods for creep fracture analysis by damage mechanics. Comput. Methods Appl. Mech. Eng. 183 (2000) 15-33
48. Nechtelberger E. Raumtemperaturkriechen und Spannungsabhängigkeit des E-Moduls von Graudußwerkstoffen. Osterr. Ing. Archit. Z. 130 (1985) 29-36
49. Needleman A., and Rice J.R. Plastic creep flow effects in the diffusive cavitation of grain boundaries. Acta Metall. 28 (1983) 1315-1332
50. Nikitenko A.F., Sosnin O.V., Torshenov N.G., and Shokalo I.K. Creep of hardening materials with different properties in tension and compression. J. Appl. Mech. Technol. Phys. 12 (1971) 277-281
51. Ohashi Y., Ohno N., and Kawai M. Evaluation of creep constitutive equations for type 304 stainless steel under repeated multiaxial loading. Trans. ASME. J. Eng. Mat. Technol. 107 (1982) 1-6
52. Page R.A., Lankford J., and Spooner S. Nucleation and early-stage growth of creep cavities in hot-pressed silicon carbide. Acta Metall. 32 (1984) 1275-1286
53. Penny R.K., and Marriott D.L. Design for Creep (1995), Chapman and Hall, London
54. Pintschovius L., Gering E., Munz D., Fett T., and Soubeyroux J.L. Determination of non-symmetric secondary creep behaviour of ceramics by residual stress measurement using neutron diffractometry. J. Mater. Sci. Lett. 8 (1989) 811-813
55. Providakis C.P. D/BEM implementation of Robinson's viscoplastic model in creep analysis of metals using a complex variable numerical technique. Adv. Eng. Softw. 33 (2002) 805-816
56. Rabotnov Yu.N. Creep Problems in Structural Members (1969), North-Holland, Amsterdam
57. Riedel H. Fracture at High Temperatures (1987), Springer-Verlag, Berlin
58. Rix, K.F.W., 1997. Konstitutive Gleichungen für metallische Werkstoffe unter zeitveränderlicher Hochtemperatur-Beanspruchung. Ph.D. thesis, RWTH Aachen.
59. Rubanov, V.V., 1987. Experimental foundation of the constitutive equations of creep for materials with different behaviour in tension and compression. Ph.D. thesis, Siberian Branch of the Russian Academy of Sciences, Institute of Hydrodynamics, Novosibirsk.
60. Saanouni K., Chaboche J.L., and Bathias C. On the creep-crack growth predictions by a local approach. Eng. Fract. Mech. 25 (1986) 677-691
61. Sakane M., and Tokura H. Experimental study of biaxial creep damage for type 304 stainless steel. Int. J. Damage Mech. 11 (2002) 247-262
62. Saleeb A.F., Arnold S.M., Castelli M.G., Wilt T.E., and Graf W. A general hereditary multimechanism-based deformation model with application to the viscoplastic response of titanium alloys. Int. J. Plast. 17 (2001) 1305-1350
63. Shariyat M., and Eslami M.R. Isoparametric finite-element thermoelasto-plastic creep analysis of shells of revolution. Int. J. Press. Vessel Piping 68 (1996) 249-259
64. Sichov, A., 1998. Eine verbesserte Schalentheorie unter Einbeziehung geometrischer Nichtlinearität sowie der Schubverzerrungen in Problemen der Kriechmechanik. Journal of the National Technical University "Kharkov Polytechnic Institute" 17, 68-72.
65. Sichov, A., 2003. Creep analysis in thin shells taking into account damage, geometrical nonlinearity and shear. Ph.D. thesis, National Academy of Sciences of Ukraine, Institute of Mechanical Engineering Problems, Kharkov.
66. Simo J.C., and Hughes T.J.R. Computational Inelasticity (1998), Springer-Verlag, NY
67. Sosnin O.V. Creep in materials with different tension and compression behaviour. J. Appl. Mech. Technol. Phys. 11 (1970) 832-835
68. Takezono S., and Fujioka S. The creep of moderately thick shells of revolution under axisymmetrical load. In: Ponter A.R.S., and Hayhurst D.R. (Eds). Creep in Structures (1981), Springer-Verlag, Berlin 128-143
69. Tilly G.P., and Harrison G.F. A comparison between the tensile and compressive creep behaviour of an 11 per cent chromium steel. J. Strain Anal. 7 (1972) 163-169
70. Tsvelodub I.Yu. The Stability Postulate and its Applications in Creep Theory of Metallic Materials (1991), Institute of Hydrodynamics, Novosibirsk
71. Tvergaard V. On the creep constrained diffusive cavitation of grain boundary effects. J. Mech. Phys. Solids 32 (1984) 373-393
72. Voyiadjis G.Z., and Zolochevsky A. Thermodynamic modeling of creep damage in materials with different properties in tension and compression. Int. J. Solids Struct. 37 (2000) 3281-3303
73. 4. J. Eur. Ceramic Soc. 19 (1999) 227-237
74. Zolochevskii A.A. Allowance for differences in strain resistance in the creep of isotropic and anisotropic materials. J. Appl. Mech. Technol. Phys. 23 (1982) 591-596
75. Zolochevskii A.A. Effect of the type of loading on the creep of isotropic strain-hardening materials. Sov. Appl. Mech. 24 (1988) 185-191
76. Zolochevskii A.A., and Morachkovskii O.K. Investigation of the creep of thin-walled shells under nonstationary loading. Sov. Appl. Mech. 18 (1982) 807-810
77. Zolochevsky, A.A., 1980. Allowance for differences in tension and compression for materials in the creep problems of shells. In: Dynamics and Strength of Machines, No. 32, Kharkov, pp. 8-13.
78. Zolochevsky, A.A., 1982. Creep of thin shells for materials with different behavior in tension and compression. Ph.D. thesis, Institute of Mechanical Engineering Problems, Kharkov.
79. Zolochevsky A. Creep of isotropic and anisotropic materials with different behaviour in tension and compression. In: Zyczkowski M. (Ed). Creep in Structures (1991), Springer-Verlag, Berlin 217-220
80. Zolochevsky, A.A., Morachkovsky, O.K., 1978. Investigation of axisymmetric creep of shell structures. In: Dynamics and Strength of Machines, No. 27, Kharkov, pp. 8-13.
81. Zolochevsky, A.A., Morachkovsky, O.K., 1979. Investigation of stress-rupture strength of shell structures. In: Dynamics and Strength of Machines, No. 30, Kharkov, pp. 32-36.
82. Zolochevsky A., and Obataya Y. Tension-compression asymmetry of creep and unilateral creep damage in aluminum for isothermal and nonisothermal processes. JSME Int. J. 44A (2001) 100-108
83. Zolochevsky A., and Voyiadjis G.Z. Theory of creep deformation with kinematic hardening for materials with different properties in tension and compression. Int. J. Plast. 21 (2005) 435-462