Functionally graded structural members obtained via the low temperature strain induced phase transformation

International Journal of Solids and Structures

Volumn 44, Issue 16, 2007, Pages 5182-5207

  Skoczen B ^a  

^a CRACOW UNIVERSITY OF TECHNOLOGY   (Poland)

Author keywords

Cryogenic temperatures; FGM; functionally graded materials; Phase transformation; Torsion

Indexed keywords

LOW TEMPERATURE PHENOMENA; MICROSTRUCTURE; PHASE TRANSITIONS; PLASTIC DEFORMATION; SUPERCONDUCTING MAGNETS; TORQUE;

CRYOGENIC TEMPERATURES; KINEMATIC CONTROL; MARTENSITE INCLUSIONS;

FUNCTIONALLY GRADED MATERIALS;

EID: 33947614615     PISSN: 00207683     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.ijsolstr.2006.12.032     Document Type: Article

References (61)

1. Aboudi J., Pindera M.J., and Arnold S.M. Higher-order theory for functionally graded materials. Composites B 30 (1999) 777-832
2. Aboudi J., Pindera M.J., and Arnold S.M. Higher-order theory for periodic multiphase materials with inelastic phases. Int. J. Plast. 19 (2003) 805-847
3. Alzina A., Toussaint E., Beakou A., and Skoczen B. Multiscale modelling of thermal conductivity in composite materials for cryogenic structures. Composite Struct. 74 2 (2006) 175-185
4. Benveniste Y. A new approach to the application of Mori-Tanaka's theory in composite materials. Mech. Mater. 6 (1987) 147-157
5. Benvenuti C., Circelli N., and Hauer M. Niobium films for superconducting accelerating cavities. Appl. Phys. Lett. 45 (1984) 583-584
6. Benvenuti C., Chiggiato P., Parrini L., and Russo R. Reactive diffusion produced niobium nitride films for superconducting cavity applications. Nucl. Instrum. Meth. Phys. Res. A336 (1993) 16-22
7. Benvenuti C., Chiggiato P., Escudeiro-Santana A., Hedley T., Mongelluzzo A., Ruzinov V., and Wevers I. Vacuum properties of TiZrV non-evaporable getter films for LHC vacuum system. Vacuum 60 (2001) 57-65
8. Cherkaoui M., Berveiller M., and Lemoine X. Couplings between plasticity and martensitic phase transformation: overall behavior of polycrystalline TRIP steels. Int. J. Plast. 16 (2000) 1215-1241
9. Dachowski S., and Boehm M. Finite thermoplasticity with phase changes based on isomorphisms. Int. J. Plast. 20 2 (2004) 323-334
10. Diani J.M., and Parks D.M. Effects of strain state on the kinetics of strain induced martensite in steels. J. Mech. Phys. Solids 46 9 (1998) 1613-1635
11. Doghri I., and Ouaar A. Homogenization of two-phase elasto-plastic composite materials and structures: study of tangent operators, cyclic plasticity and numerical algorithms. Int. J. Solids Struct. 40 7 (2003) 1681-1712
12. Eshelby J.D. The determination of the elastic field of an ellipsoidal inclusion, and related problems. Proc. R. Soc. Lond. Ser A 241 (1957) 376-396
13. Fischer, F.D., 1997. Modeling and simulation. In: Berveiller, M., Fischer, F.D. (Eds.), Mechanics of Solids with Phase Changes, No. 368. Springer, Wien, New York, pp. 189-237.
14. Fischer F.D., Oberaigner E.R., Tanaka K., and Nishimura F. Transformation induced plasticity revised an updated formulation. Int. J. Solids Struct. 35 18 (1998) 2209-2227
15. Fischer F.D., Reisner G., Werner E., Tanaka K., Cailletaud G., and Antretter T. A new view on transformation induced plasticity (TRIP). Int. J. Plast. 16 7-8 (2000) 723-748
16. Garion C., and Skoczeń B. Modeling of plastic strain induced martensitic transformation for cryogenic applications. J. Appl. Mech. 69 6 (2002) 755-762
17. Garion C., Skoczeń B., and Sgobba S. Constitutive modelling and identification of parameters of the plastic strain induced martensitic transformation in 316L stainless steel at cryogenic temperatures. Int. J. Plast. 22 7 (2006) 1234-1264
18. Goupee A.J., and Vel S.S. Two-dimensional optimization of material composition of functionally graded materials using meshless analyses and a genetic algorithm. Comput. Methods Appl. Mech. Engrg. 195 (2006) 5926-5948
19. Hashin Z., and Shtrikman S. A variational approach to the theory of the elastic behaviour of multiphase materials. J. Mech. Phys. Solids 211 (1963) 127-140
20. Hecker S.S., Stout M.G., Staudhammer K.P., and Smith J.L. Effects of strain state and strain rate on deformation-induced transformation in 304 stainless steel: Part I. Magnetic measurements and mechanical behaviour. Metall. Trans. A 13A (1982) 619-626
21. Hershey A.V. The elasticity of an isotropic aggregate of anisotropic cubic crystals. J. Appl. Mech. 21 (1954) 236-240
22. Han H.N., Lee C.G., Oh C.-S., Lee T.-H., and Kim S.-J. A model for deformation behavior and mechanically induced martensitic transformation of metastable austenitic steel. Acta Mater. 52 17 (2004) 5203-5214
23. Hill R. A self consistent mechanics of composite materials. J. Mech. Phys. Solids 13 (1965) 213-222
24. Iwamoto T. Multiscale computational simulation of deformation behavior of TRIP steel with growth of martensitic particles in unit cell by asymptotic homogenization method. Int. J. Plast. 20 4-5 (2004) 841-869
25. Kieback B., Neubrand A., and Riedel H. Processing techniques for functionally graded materials. Mater. Sci. Eng. A362 (2003) 81-105
26. Koizumi, M., 1992. The concept of FGM. In: Proceedings of the Second International Symposium on the Functionally Graded Materials at the Third International Ceramic Science and Technology Congress, San Francisco, USA.
27. Koizumi M., and Niino M. Overview of FGM research in Japan. MRS Bull. 20 (1995) 19-21
28. Koizumi M. FGM activities in Japan. Composites B 28B (1997) 1-4
29. Kordas Z., and Wróblewski A. The problem of full plastification of circular cylinder with asymmetric nonhomogeneity. Rozp. Inz. 35 2 (1987) 327-340
30. Kordas Z., and Dollar A. Non-homogeneous, circular thick-walled fully plasticized at failure cylinders under non-uniformly distributed pressure. Mech. Teor. Stos. 28 1-2 (1990)
31. Kröner E. Berechnung der elastischen Konstanten des Vielkristalls aus den Konstanten des Einkristalls. Z. Physik. 151 (1958) 504-518
32. Levitas V.I., Idesman A.V., and Olson G.B. Continuum modeling of strain-induced martensitic transformation at shear band intersections. Acta Mater. 47 1 (1999) 219-233
33. Mori T., and Tanaka K. Average stress in matrix and average elastic energy of materials with misfitting inclusions. Acta Metall. Mater. 21 (1973) 571-574
34. Morris J.W., Chan J.W., and Mei Z. The influence of deformation-induced martensite on the cryogenic behavior of 300-series stainless steels. Cryogenics ICMC Suppl. 32 (1992) 78-85
35. o 12, Tome 43 (1982) 429-434
36. Nemat-Nasser S. Averaging theorems in finite deformation plasticity. Mech. Mater. 31 (1999) 493-523
37. Nemat-Nasser S. Multi-inclusion method for finite deformations: exact results and applications. Mater. Sci. Eng. A285 (2000) 239-245
38. Olson G.B., and Cohen M. Kinetics of strain-induced martensitic nucleation. Metall. Trans. 6A (1975) 791-795
39. Olszak W., and Urbanowski W. Elastic-plastic thick-walled non-homogeneous cylinder subjected to internal pressure and longitudinal load. AMS 7 3 (1955) 315-336 in Polish
40. Olszak W., and Murzewski J. Elastic-plastic bending of non-homogeneous orthotropic circular plates. AMS 9 4 (1957) 467-485 5, 605-629
41. Olszak, W., Sawczuk, A., 1957. Problems of the limit analysis and design of non-homogeneous axially symmetric shells, 2nd CSRC, 249-256.
42. Paul B. Prediction of elastic constants of multiphase materials. Trans. Metall. Soc. AIME (1960) 36-41
43. Pierard O., Friebel C., and Doghri I. Mean-field homogenization of multi-phase thermo-elastic composites: a general framework and its validation. Composites Sci. Technol. 64 (2004) 1587-1603
44. Pierard O., and Doghri I. An enhanced affine formulation and the corresponding numerical algorithms for the mean fields homogenization of elasto-viscoplastic composites. Int. J. Plast. 22 1 (2006) 131-157
45. Pindera M.J., and Dunn P. Evaluation of the higher-order theory for functionally graded materials via the finite element method. Composites B 28B (1997) 109-119
46. Rooney F., and Ferrari M. Tension, bending and flexure of functionally graded cylinders. Int. J. Solids Struct. 38 (2001) 413-421
47. Sacchi G. Limit analysis and design of structures having elements with random distribution of yield stresses, with associated and non-associated flow laws. Mec 6 1 (1971) 65-68
48. Smith G.F., and Spencer A.J.M. A continuum theory of a plastic-rigid solid reinforced by two families of inextensible fibres. QJMAM 23 4 (1970) 489-504
49. Sofiyev A.H., and Schnack E. The stability of functionally graded cylindrical shells under linearly increasing dynamic torsional load. Eng. Struct. 26 (2004) 1321-1331
50. Stringfellow R.G., Parks D.M., and Olson G.B. Constitutive model for transformation plasticity accompanying strain-induced martensitic transformations in metastable austenitic steels. Acta Metall. 40 7 (1992) 1703-1716
51. Suzuki K., Fukakura J., and Kashiwaya H. Cryogenic fatigue properties of 304L and 316L stainless steels compared to mechanical strength and increasing magnetic permeability. Am. Soc. Testing Mater. (1988) 190-197
52. Tarn J.Q. Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads. Int. J. Solids Struct. 38 (2001) 8189-8206
53. Tarn J.Q., and Wang Y.M. Laminated composite tubes under extension, torsion, bending, shearing and pressuring: a state space approach. Int. J. Solids Struct. 38 (2001) 9053-9075
54. Tomita Y., and Iwamoto T. Computational prediction of deformation behavior of TRIP steels under cyclic loading. Int. J. Mech. Sci. 43 9 (2001) 2017-2034
55. Van Sciver S.W. Helium Cryogenics (1986), Plenum Press, New York
56. Watanabe Y., and Sakai H. Control of magnetic gradient in magnetically graded materials fabricated by martensitic transformation technique. Mater. Sci. Forum (2003) 423-425 435-440
57. Wechsler M.S., Lieberman D.S., and Read T.A. On the theory of the formation of martensite. AIME Trans. J. Metals 197 (1953) 1503-1515
58. Yang Y.Y. Time-dependent stress analysis in functionally graded materials. Int. J. Solids Struct. 37 (2000) 7593-7608
59. Życzkowski M. The limit load of a thick-walled tube in a general circularly symmetrical case. AMS 8 2 (1957) 155-179 9th ICAM 1956, 8, 1957, 129-139
60. Życzkowski M. Limit state of non-homogeneous rotating circular disks. 9th ICAM 1956 6 (1957) 351-360
61. Życzkowski M. Combined loadings in the theory of plasticity (1981), PWN - Polish Scientific Publishers, Warsaw, Poland