The effect of time on crazing and fracture

Advances in Polymer Science

Volumn 187, Issue , 2005, Pages 1-33

  Kausch, Hans Henning ^a   Michler, Goerg H ^b  

^a EPFL   (Switzerland)

^b MARTIN LUTHER UNIVERSITY HALLE WITTENBERG   (Germany)

Author keywords

Crazing; Creep; Disentanglement; Molecular deformation mechanisms; Time dependent strength; Toughness

Indexed keywords

EID: 33947354606     PISSN: 00653195     EISSN: None     Source Type: Book Series    
DOI: 10.1007/b136954     Document Type: Review

References (74)

1. Michler GH (1992) Kunststoff-Mikromechanik. Carl Hanser, Munich
2. Materials Science and Technology: A Comprehensive Treatment (1993) Cahn RW, Haasen P, Kramer EJ (eds) Structure and Properties of Polymers, Thomas EL, vol-Ed, vol 12. Wiley, New York
3. Kausch H-H, Heymans N, Plummer CJ, Decroly P (2001) Matériaux Polymères: Propriétés Mécaniques et Physiques, Principes de Mise en Oeuvre. Presses Polytechniques et Universitaires Romandes, Lausanne
4. Lousteaux B (2002) PhD Thesis, University Pierre and Marie Curie, Paris
5. Flory P (1953) Principles of Polymer Chemistry. Cornell University Press, Ithaca
6. Dettenmaier M (1986) personal communication based on the experiments published in Macromolecules 19:773
7. Suter U, p 63 in [3]
8. Gentile FT, Suter UW Amorphous polymer microstructure, Chap 2 in [2]
9. Monnerie L, Lauprêtre F, Halary JL (2005) Investigation of Solid-State Transitions in Linear and Crosslinked Amorphous Polymers. Adv Polym Sci 187:35
10. Monnerie L, Halary JL, Kausch H-H (2005) Deformation, Yield and Fracture of Amorphous Polymers: Relation to the Secondary Transitions. Adv Polym Sci 187:215
11. Fischer EW, Dettenmaier M (1978) J Noncryst Solids 31:11
12. Michler GH (1992) p 216 in [1]
13. Chan C-M, Li L (2005) in volume 188
14. Grein C (2005) in volume 188
15. Brown HR (1991) Macromolecules 24:2752
16. Kausch H-H (1987) Polymer Fracture, 2nd ed. Springer, Heidelberg Berlin New York
17. Jud K, Kausch H-H, Williams JG (1981) J Materials Sci 16:204
18. Gensler R (1998) Thesis No 1863, Ecole Polytechnique Fédé rale de Lausanne, Lausanne, Switzerland
19. Kausch H-H, Gensler R, Grein C, Plummer CJG, Scaramuzzino P (1999) J Macromol Sci B38:803
20. Kausch H-H, Langbein D (1973) Journal of Polymer Science: Polymer Physics Edition 11:1201
21. Michler GH, Godehardt R (2000) Cryst Res Technol 35:863
22. Kawai H, Hashimoto T, Miyoshi K, Uno H, Fujimura MJ (1980) Macromol Sci Polym Phys 17:427
23. Adhikar R, Michler GH, Goerlitz S, Knoll K (2004) J Appl Polym Sci 92:1208
24. Galeski A (2004) 11. Int Conf Polymeric Materials 2004, Halle, p C06
25. Williams JG (1984) Fracture mechanics of Polymers. Ellis Horwood, Chichester
26. Grellmann W, Seidler S (2001) Deformation and fracture behaviour of polymers. Springer, Berlin Heidelberg New York
27. Williams JG, Moore DR, Pavan A (2001) Fracture Mechanics Testing Methods for Polymers, Adhesives and Composites. Elsevier, Amsterdam
28. Knauss WG (1970) Int J Fracture 6:7
29. Bradley W, Cantwell WJ, Kausch H-H (1998) Mech Time-Dependent Materials 1:241
30. Stalder B cited after [16], p 237
31. Grellmann W, Seidler S, Hesse W (2001) p 71 in [26]
32. Greig JM, Leevers PS, Yayla P (1992) Engineering Fracture Mechanics 42:663
33. Chan MKV, Williams JG (1983) Polymer 24:234
34. Takahashi K, Arakawa K (1987) Experimental Mechanics 27:195
35. Ferrer JB, Fond C, Arakawa K, Takahashi K, Béguelin P, Kausch H-H (1997) Int J Fracture 87:L77
36. Harward RN (1973) The Physics of Glassy Polymers. Appl Sci Publ, London
37. Ferry DJ (1960) Viscoelastic properties of polymers. Wiley, New York
38. Crist B (1993) Plastic deformation of polymers, Chap 10 in [2]
39. Ward IM, Hadley DW (1993) Mechanical properties of solid polymers. Wiley, Chichester
40. Myasnikova LP, Marikhin VA, Ivan'kova EM, Yakushev PN (1999) J Macrom Science-Physics 38B:859
41. Eyring H (1936) J Chem Phys 4:283
42. Castiglione C, Verzanini D, Pavan A (2004) Plastic Pipes XII, Session 10b
43. Berger L, Kausch H-H (2003) Polymer 44:5877
44. Wilding MA, Ward IM (1978) Polymer 19:969
45. Plummer CJG (2004) Adv in Polymer Si 169:75
46. Damen J, Schramm D, Anderson K (2004) Plastic Pipes XII, Session 10b
47. da Andrade ENG (1910) Proc Royal Soc London 84:1
48. Findley WN (1987) Polym Eng Sci 27:582
49. Schapery RA (1997) Mechanics of Time-Dependent Materials 1:209
50. Gregory A, Vogel D, Béguelin PH, Gensler R, Kausch H-H (1999) Mechanics of Time-Dependent Materials 3:71
51. Pilz G, Lang RW (2001) Proceedings of Plastics Pipes XI, p 903
52. Niklas H, Kausch von Schmeling HH (1963) Kunststoffe 53:886
53. Janson LE, Bergstrom G, Backman M, Blomster T, Plastic Pipes XII, Session 10b
54. Starke JU, Schulze G, Michler GH (1997) Acta Polymer 48:92
55. Kambour RP (1968) Appl Polymer Symposia 7:215
56. Rabinowitz S, Beardmore P (1969) CRC Critical Reviews 1:1
57. Kausch H-H (ed) (1983) Crazing in Polymers Advances in Polymer Science, 52/53. Springer, Berlin Heidelberg New York
58. Kausch H-H (ed) (1990) Crazing in Polymers, vol II. Advances in Polymer Science, 91/92. Springer, Berlin Heidelberg New York
59. Plummer CJG (1997) Current Trends in Polymer Sci 2:125
60. Paredes E, Fischer EW (1979) Makromol Chem 180:2707
61. Kramer EJ (1983) p 1 in [57]
62. Michler GH, Section B 1.4, p 193 in [26]
63. Dettenmaier M (1983) p 57 in [57]
64. Estevez R, van der Giessen E (2005) Adv Polym Sci 188:195
65. Altstädt V (2005) Adv Polym Sci 188:105
66. Chateauminois A, Baietto-Dubourg MC (2005) Adv Polym Sci 188:153
67. Scaramuzzino P (1998) Thesis No 1818, Ecole Polytechnique Fédérale de Lausanne, Lausanne, Switzerland
68. Monnerie L, Halary JL, Kausch H-H (2005) Deformation, Yield and Fracture of Amorphous Polymers: Relation to the Secondary Transitions, Sect 2.3 of [10]. Adv Polym Sci 187:215
69. Brown N, Lu X (1995) Polymer 36:543
70. Kausch H-H (1987) p 347 in [16]
71. Schapery RA (1990) J Mech Phys Solids 38:215
72. Park SW, Kim YR, Schapery RA (1996) Mech Mater 24:241
73. Rodrigez A, Eyerer P (2005) 10. Tagung Deformation und Bruchverhalten von Kunststoffen, Merseburg/Germany, June 15-17
74. Strobl G (2005) Symposium "Deformation Mechanisms in Polymers", Halle/Germany, May 19-20