-
1
-
-
16244416250
-
Performance evaluation of mills and separators in a commercial flour mill
-
Al-Mogahwi, H.W.H. and Baker, C.G.J., 2005, Performance evaluation of mills and separators in a commercial flour mill, Trans IChemE, Part C, Food Bioprod Proc, 83: 25-35.
-
(2005)
Trans IChemE, Part C, Food Bioprod Proc
, vol.83
, pp. 25-35
-
-
Al-Mogahwi, H.W.H.1
Baker, C.G.J.2
-
2
-
-
0015159461
-
A review: Introduction to the mathematical description of grinding as a rate process
-
Austin, L.G., 1972, A review: Introduction to the mathematical description of grinding as a rate process, Powder Technol, 5: 1-17.
-
(1972)
Powder Technol
, vol.5
, pp. 1-17
-
-
Austin, L.G.1
-
3
-
-
0003294959
-
On predicting roller milling performance. Part III. The particle size distribution from roller milling of various wheats using fluted rolls
-
University of Melbourne, Melbourne, Australia
-
Bunn, P.J., Campbell, G.M., Fang, C. and Hook, S.C.W., 2001, On predicting roller milling performance. Part III. The particle size distribution from roller milling of various wheats using fluted rolls, Proc 6th World Chemical Engineering Congress, University of Melbourne, Melbourne, Australia.
-
(2001)
Proc 6th World Chemical Engineering Congress
-
-
Bunn, P.J.1
Campbell, G.M.2
Fang, C.3
Hook, S.C.W.4
-
4
-
-
0035972106
-
On predicting roller milling performance. I. The Breakage Equation
-
Campbell, G.M. and Webb, C., 2001, On predicting roller milling performance. I. The Breakage Equation, Powder Technol, 115: 234-242.
-
(2001)
Powder Technol
, vol.115
, pp. 234-242
-
-
Campbell, G.M.1
Webb, C.2
-
5
-
-
0035972118
-
On predicting roller milling performance. II. The Breakage Function
-
Campbell, G.M., Bunn, P.J., Webb, C. and Hook, S.C.W., 2001a, On predicting roller milling performance. II. The Breakage Function, Powder Technol, 115: 243-255.
-
(2001)
Powder Technol
, vol.115
, pp. 243-255
-
-
Campbell, G.M.1
Bunn, P.J.2
Webb, C.3
Hook, S.C.W.4
-
6
-
-
0001908931
-
Wheat flour milling: A case study in processing of particulate foods
-
in Hoyle, W. (ed.). (Royal Society of Chemistry, Cambridge, UK)
-
Campbell, G.M., Fang, C., Bunn, P.J., Gibson, A.A., Thompson, F. and Haigh, A., 2001b, Wheat flour milling: A case study in processing of particulate foods, in Hoyle, W. (ed.). Powders and Solids - Developments in Handling and Processing Technologies, 95-111 (Royal Society of Chemistry, Cambridge, UK).
-
(2001)
Powders and Solids - Developments in Handling and Processing Technologies
, pp. 95-111
-
-
Campbell, G.M.1
Fang, C.2
Bunn, P.J.3
Gibson, A.A.4
Thompson, F.5
Haigh, A.6
-
7
-
-
0010330148
-
Flour milling
-
in Cauvain, S.P. and Young, L.S. (eds). (Blackie Academic and Professional, London, UK)
-
Caterall, P., 1998, Flour milling, in Cauvain, S.P. and Young, L.S. (eds). Technology of Breadmaking, 296-329 (Blackie Academic and Professional, London, UK).
-
(1998)
Technology of Breadmaking
, pp. 296-329
-
-
Caterall, P.1
-
8
-
-
0036318621
-
Single kernel wheat hardness and fracture properties in relation to density and the modelling of fracture in wheat endosperm
-
Dobraszczyk, B.J., Whitworth, M.B., Vincent, J.F.V. and Khan A.A., 2002, Single kernel wheat hardness and fracture properties in relation to density and the modelling of fracture in wheat endosperm, J Cereal Sci, 35: 245-263.
-
(2002)
J Cereal Sci
, vol.35
, pp. 245-263
-
-
Dobraszczyk, B.J.1
Whitworth, M.B.2
Vincent, J.F.V.3
Khan, A.A.4
-
9
-
-
0034460221
-
Effect of measurement method and moisture content on wheat kernel density measurement
-
Fang, C. and Campbell, G.M., 2000, Effect of measurement method and moisture content on wheat kernel density measurement, Trans IChemE, Part C, Food Bioprod Proc, 78: 179-186.
-
(2000)
Trans IChemE, Part C, Food Bioprod Proc
, vol.78
, pp. 179-186
-
-
Fang, C.1
Campbell, G.M.2
-
10
-
-
0036067911
-
Stress-strain analysis and visual observation of wheat kernel breakage during first break roller milling
-
Fang, C. and Campbell, G.M., 2002a, Stress-strain analysis and visual observation of wheat kernel breakage during first break roller milling, Cereal Chem, 79: 511-517.
-
(2002)
Cereal Chem
, vol.79
, pp. 511-517
-
-
Fang, C.1
Campbell, G.M.2
-
11
-
-
0036068417
-
Effect of roll fluting disposition and roll gap on the breakage of wheat kernels during first break roller milling
-
Fang, C. and Campbell, G.M., 2002b, Effect of roll fluting disposition and roll gap on the breakage of wheat kernels during first break roller milling, Cereal Chem, 79: 518-522.
-
(2002)
Cereal Chem
, vol.79
, pp. 518-522
-
-
Fang, C.1
Campbell, G.M.2
-
12
-
-
0037216043
-
On predicting roller milling performance IV: Effect of roll disposition on the particle size distribution from first break milling of wheat
-
Fang, C. and Campbell, G.M., 2003a, On predicting roller milling performance IV: Effect of roll disposition on the particle size distribution from first break milling of wheat, J Cereal Sci, 37: 21-29.
-
(2003)
J Cereal Sci
, vol.37
, pp. 21-29
-
-
Fang, C.1
Campbell, G.M.2
-
13
-
-
0037216180
-
On predicting roller milling performance V: Effect of moisture content on the particle size distribution from first break milling of wheat
-
Fang, C. and Campbell, G.M., 2003b, On predicting roller milling performance V: Effect of moisture content on the particle size distribution from first break milling of wheat, J Cereal Sci, 37: 31-41.
-
(2003)
J Cereal Sci
, vol.37
, pp. 31-41
-
-
Fang, C.1
Campbell, G.M.2
-
14
-
-
33644589496
-
Predicting the size and compositional distributions of wheat flour stocks following first break roller milling using the breakage matrix approach
-
Fistes, A. and Tanovic, G., 2006, Predicting the size and compositional distributions of wheat flour stocks following first break roller milling using the breakage matrix approach, J Food Eng, 75: 527-534.
-
(2006)
J Food Eng
, vol.75
, pp. 527-534
-
-
Fistes, A.1
Tanovic, G.2
-
15
-
-
0030513170
-
Predicting a hardness measurement using the Single-Kernel Characterisation System
-
Gaines, C.S., Finney, P.F., Fleege, L.M. and Andrews, L.C., 1996, Predicting a hardness measurement using the Single-Kernel Characterisation System, Cereal Chem, 73: 278-283.
-
(1996)
Cereal Chem
, vol.73
, pp. 278-283
-
-
Gaines, C.S.1
Finney, P.F.2
Fleege, L.M.3
Andrews, L.C.4
-
16
-
-
0000744294
-
A starch-granule protein associated with endosperm softness in wheat
-
Greenwell, P. and Schofield, J.D., 1986, A starch-granule protein associated with endosperm softness in wheat, Cereal Chem, 63: 379-380.
-
(1986)
Cereal Chem
, vol.63
, pp. 379-380
-
-
Greenwell, P.1
Schofield, J.D.2
-
17
-
-
0001051667
-
Some factors affecting First Break grinding of Canadian wheat
-
Hsieh, F.H., Martin, D.G., Black, H.C. and Tipples, K.H., 1980, Some factors affecting First Break grinding of Canadian wheat, Cereal Chem, 57: 217-223.
-
(1980)
Cereal Chem
, vol.57
, pp. 217-223
-
-
Hsieh, F.H.1
Martin, D.G.2
Black, H.C.3
Tipples, K.H.4
-
18
-
-
33947206974
-
-
(Carnegie Publishing Ltd, Lancaster, UK)
-
Jones, G., 2001, The Millers - A Story of Technological Endeavour and Industrial Success, 1870-2001 (Carnegie Publishing Ltd, Lancaster, UK).
-
(2001)
The Millers - A Story of Technological Endeavour and Industrial Success, 1870-2001
-
-
Jones, G.1
-
19
-
-
0012135210
-
-
(The Northern Publishing Co. Ltd, London, UK)
-
Lockwood, J.F., 1945, Flour Milling (The Northern Publishing Co. Ltd, London, UK).
-
(1945)
Flour Milling
-
-
Lockwood, J.F.1
-
20
-
-
0000583904
-
Development of a single kernel wheat characterisation system
-
Martin, C.R., Rousser, R. and Brabec, D.L., 1993, Development of a single kernel wheat characterisation system, Trans American Soc of Agric Eng, 36(5): 1399-1404.
-
(1993)
Trans American Soc of Agric Eng
, vol.36
, Issue.5
, pp. 1399-1404
-
-
Martin, C.R.1
Rousser, R.2
Brabec, D.L.3
-
21
-
-
0030485217
-
Evaluation of rotor-crescent design for sensing wheat kernels hardness
-
Martin, C.R. and Steele, J.L., 1996, Evaluation of rotor-crescent design for sensing wheat kernels hardness, Trans American Soc Agric Eng, 39(6): 2223-2227.
-
(1996)
Trans American Soc Agric Eng
, vol.39
, Issue.6
, pp. 2223-2227
-
-
Martin, C.R.1
Steele, J.L.2
-
22
-
-
0002668997
-
Impact of blending hard and soft white wheats on milling and baking quality
-
Morris, C.F., 1992, Impact of blending hard and soft white wheats on milling and baking quality, Cereal Foods World, 37: 643-648.
-
(1992)
Cereal Foods World
, vol.37
, pp. 643-648
-
-
Morris, C.F.1
-
23
-
-
85030506761
-
Single kernel effects on breakage during wheat milling
-
PhD thesis, UMIST, Manchester, UK
-
Muhamad, I.I., 2004, Single kernel effects on breakage during wheat milling, PhD thesis, UMIST, Manchester, UK.
-
(2004)
-
-
Muhamad, I.I.1
-
24
-
-
1542289047
-
Effects of kernel hardness and moisture content on wheat breakage in the Single Kernel Characterisation System
-
Muhamad, I.I. and Campbell, G.M., 2004, Effects of kernel hardness and moisture content on wheat breakage in the Single Kernel Characterisation System, Innovative Food Sci Emerging Technol, 5: 119-125.
-
(2004)
Innovative Food Sci Emerging Technol
, vol.5
, pp. 119-125
-
-
Muhamad, I.I.1
Campbell, G.M.2
-
25
-
-
0031912205
-
Single-kernel characteristics of hard winter wheats in relation to milling and baking quality
-
Ohm, J.B., Chung, O.K. and Deyoe, C.W., 1998, Single-kernel characteristics of hard winter wheats in relation to milling and baking quality, Cereal Chem, 75: 156-161.
-
(1998)
Cereal Chem
, vol.75
, pp. 156-161
-
-
Ohm, J.B.1
Chung, O.K.2
Deyoe, C.W.3
-
26
-
-
0030868671
-
Application of the Single-Kernel Characterisation System to wheat receiving testing and quality prediction
-
Osborne, B.G., Kotwal, Z., Blakeney, A.B., O'Brien, L., Shah, S. and Fearn, T., 1997, Application of the Single-Kernel Characterisation System to wheat receiving testing and quality prediction, Cereal Chem, 74: 467-470.
-
(1997)
Cereal Chem
, vol.74
, pp. 467-470
-
-
Osborne, B.G.1
Kotwal, Z.2
Blakeney, A.B.3
O'Brien, L.4
Shah, S.5
Fearn, T.6
-
27
-
-
0141568187
-
Review: Single kernel characterization principles and applications
-
Osborne, B.G. and Anderssen, R.S., 2003, Review: Single kernel characterization principles and applications, Cereal Chem, 80: 613-622.
-
(2003)
Cereal Chem
, vol.80
, pp. 613-622
-
-
Osborne, B.G.1
Anderssen, R.S.2
-
28
-
-
33846632656
-
In-situ measurement of the rheological properties of wheat and barley using the SKCS 4100
-
in Cauvain, S.P., Salmon, S,E. and Young, L.S. (eds). (Woodhead Publishing Ltd, Cambridge, UK)
-
Osborne, B.G., Anderssen, R.S. and Huynh, H.-N., 2004, In-situ measurement of the rheological properties of wheat and barley using the SKCS 4100, in Cauvain, S.P., Salmon, S,E. and Young, L.S. (eds). Proceedings of the 12th ICC Cereal and Bread Congress, 207-211 (Woodhead Publishing Ltd, Cambridge, UK).
-
(2004)
Proceedings of the 12th ICC Cereal and Bread Congress
, pp. 207-211
-
-
Osborne, B.G.1
Anderssen, R.S.2
Huynh, H.-N.3
-
29
-
-
0345499133
-
Genotype and genotype x environmental interaction effects on hardness estimates in winter wheat
-
Pomeranz, Y. and Mattern, P.J., 1988, Genotype and genotype x environmental interaction effects on hardness estimates in winter wheat, Cereal Foods World, 33: 371-374.
-
(1988)
Cereal Foods World
, vol.33
, pp. 371-374
-
-
Pomeranz, Y.1
Mattern, P.J.2
-
30
-
-
0025535826
-
Wheat hardness: Its genetic, structural and biochemical background, measurement and significance
-
in Pomeranz, Y. (ed.). (American Association of Cereal Chemists, St Paul, Minnesota)
-
Pomeranz, Y. and Williams, P.C., 1990, Wheat hardness: its genetic, structural and biochemical background, measurement and significance, in Pomeranz, Y. (ed.). Advances in Cereal Science and Technology, 471-544 (American Association of Cereal Chemists, St Paul, Minnesota).
-
(1990)
Advances in Cereal Science and Technology
, pp. 471-544
-
-
Pomeranz, Y.1
Williams, P.C.2
-
31
-
-
0342656499
-
Description of a micromill with instrumentation for measuring grinding characteristics of wheat grain
-
Pujol, R., Létang, C., Lempereur, I., Chaurand, M., Mabille, F. and Abecassis, J., 2000, Description of a micromill with instrumentation for measuring grinding characteristics of wheat grain, Cereal Chem, 77: 421-427.
-
(2000)
Cereal Chem
, vol.77
, pp. 421-427
-
-
Pujol, R.1
Létang, C.2
Lempereur, I.3
Chaurand, M.4
Mabille, F.5
Abecassis, J.6
-
32
-
-
33947199128
-
-
(Siebel Publishing Company, Chicago, USA)
-
Pyler, E.J., 1958, Our Daily Bread (Siebel Publishing Company, Chicago, USA).
-
(1958)
Our Daily Bread
-
-
Pyler, E.J.1
-
33
-
-
85030514919
-
-
(Siebel Publishing Company, Chicago, USA)
-
Pyler, E.J., 1973, Baking Science and Technology Volume I (Siebel Publishing Company, Chicago, USA).
-
(1973)
Baking Science and Technology
, vol.1
-
-
Pyler, E.J.1
-
35
-
-
0000393484
-
The biochemical basis of grain hardness in wheat
-
Simmonds, D.H., Barlow, K.K. and Wrigley, C.W., 1973, The biochemical basis of grain hardness in wheat, Cereal Chem, 50: 553-563.
-
(1973)
Cereal Chem
, vol.50
, pp. 553-563
-
-
Simmonds, D.H.1
Barlow, K.K.2
Wrigley, C.W.3
-
36
-
-
0033984001
-
Application of the single-kernel characterization system to durum wheat testing and quality prediction
-
Sissons, M.J., Osborne, B.G., Hare, R.A., Sissons, S.A. and Jackson, R., 2000, Application of the single-kernel characterization system to durum wheat testing and quality prediction, Cereal Chem, 77: 4-10.
-
(2000)
Cereal Chem
, vol.77
, pp. 4-10
-
-
Sissons, M.J.1
Osborne, B.G.2
Hare, R.A.3
Sissons, S.A.4
Jackson, R.5
-
37
-
-
0346831264
-
-
(University of Minnesota Press, Minneapolis, USA)
-
Storck, J. and Teague, W.D., 1952, Flour for Man's Bread (University of Minnesota Press, Minneapolis, USA).
-
(1952)
Flour for Man's Bread
-
-
Storck, J.1
Teague, W.D.2
-
38
-
-
23944439448
-
Periodic learning of B-spline models for output PDF control: Application to MWD control
-
Wang, H., Zhang, J.F. and Yue, H., 2005, Periodic learning of B-spline models for output PDF control: application to MWD control, Proceedings of the American Control Conference 2, 955-960.
-
(2005)
Proceedings of the American Control Conference
, vol.2
, pp. 955-960
-
-
Wang, H.1
Zhang, J.F.2
Yue, H.3
-
39
-
-
84902407027
-
Milling and flour quality
-
in Cauvain, S. (ed.). (Woodhead Publishing Ltd., Cambridge, UK)
-
Webb, C. and Owens, G.W., 2003, Milling and flour quality, in Cauvain, S. (ed.). Bread Making: Improving Quality, 200-219 (Woodhead Publishing Ltd., Cambridge, UK).
-
(2003)
Bread Making: Improving Quality
, pp. 200-219
-
-
Webb, C.1
Owens, G.W.2
-
40
-
-
85030505768
-
Walter Bushuk: Cereal chemist and mentor
-
in Ng, P.K.W. and Wrigley, C.W. (eds). (American Association of Cereal Chemists, Minnesota, USA)
-
Wrigley, C.W., 2002, Walter Bushuk: Cereal chemist and mentor, in Ng, P.K.W. and Wrigley, C.W. (eds). The Bushuk Legacy, 1-47 (American Association of Cereal Chemists, Minnesota, USA).
-
(2002)
The Bushuk Legacy
, pp. 1-47
-
-
Wrigley, C.W.1
-
41
-
-
85030517028
-
Heterogeneity in structure and grain composition
-
Montpellier, France, 8th October 1999 (published by ICC, Austria)
-
Whitworth, M.B., 1999, Heterogeneity in structure and grain composition, Proceedings of Process Engineering of Cereal Products Workshop, Montpellier, France, 8th October 1999 (published by ICC, Austria).
-
(1999)
Proceedings of Process Engineering of Cereal Products Workshop
-
-
Whitworth, M.B.1
-
42
-
-
0142063018
-
A systematic analysis of the break subsystems of a wheat flour pilot mill
-
Yuan, J., Flores, R.A., Eustace, D. and Milliken, G.A., 2003, A systematic analysis of the break subsystems of a wheat flour pilot mill, Trans IChemE, Part C, Food Bioprod Proc, 81: 170-179.
-
(2003)
Trans IChemE, Part C, Food Bioprod Proc
, vol.81
, pp. 170-179
-
-
Yuan, J.1
Flores, R.A.2
Eustace, D.3
Milliken, G.A.4
|