Microstructure and mechanical properties of slowly cooled Cu47.5Zr47.5Al5

Journal of Materials Research

Volumn 22, Issue 2, 2007, Pages 326-333

  Das, J ^a,b   Pauly, S ^a   Duhamel, C ^a   Wei, B C ^c   Eckert, J ^a,b  

^a DARMSTADT UNIVERSITY OF TECHNOLOGY   (Germany)

^b IFW DRESDEN   (Germany)

^c INSTITUTE OF MECHANICS   (China)

Author keywords

[No Author keywords available]

Indexed keywords

COMPACTION; DIFFERENTIAL SCANNING CALORIMETRY; DUCTILITY; FRACTURE; MECHANICAL PROPERTIES; METALLIC GLASS; METALLOGRAPHIC MICROSTRUCTURE; SCANNING ELECTRON MICROSCOPY; STRAIN; VOLUME FRACTION;

ARC MELTING; FRACTURE STRAIN; SUCTION CASTING;

COPPER ALLOYS;

EID: 33947191383     PISSN: 08842914     EISSN: None     Source Type: Journal    
DOI: 10.1557/jmr.2007.0033     Document Type: Article

References (45)

1. 22.5. Appl. Phys. Lett. 63, 2342 (1993).
2. Supercooled Liquid, Bulk Glassy and Nanocrystalline States of Alloys, edited by A. Inoue, A.R. Yavari, W.L. Johnson, and R.H. Dauskardt (Mater. Res. Soc. Symp. Proc. 644, Warrendale, PA, 2001).
3. A. Inoue: Stabilization of metallic supercooled liquid and bulk amorphous alloys. Acta Mater. 48, 279 (2000).
4. J. Eckert, N. Mattern, M. Zinkevitch, and M. Seidel: Crystallization behavior and phase formation in Zr-Al-Cu-Ni metallic glass containing oxygen. Mater. Trans. 39, 623 (1998).
5. 10 metallic glass. Acta Mater. 46, 5475 (1998).
6. 22.5 bulk amorphous alloys. Scripta Metall. Mater. 30, 429 (1994).
7. 12.6 bulk metallic glass composites. Acta Mater. 47, 2455 (1999).
8. 5 metallic glass composites containing nanocrystalline W particles. J. Appl. Phys. 85, 7112 (1999).
9. 12.6 metallic glass matrix composites. Appl. Phys. Lett. 80, 1906 (2002).
10. 12.6 metallic glass matrix particulate composites. J. Mater. Res. 14, 3292 (1999).
11. R.B. Dandliker, R.D. Conner, and W.L. Johnson: Melt infiltration casting of bulk metallic-glass matrix composites. J. Mater. Res. 13, 2896 (1998).
12. C. Fan, R.T. Ott, and T.C. Hufnagel: Metallic glass matrix composite with precipitated ductile reinforcement. Appl. Phys. Lett. 81, 1020 (2002).
13. 30 bulk glass composites containing ZrC particles formed by the in-situ reaction. Mater. Trans., JIM 41, 1454 (2000).
14. C.C. Hays, C.P. Kim, and W.L. Johnson: Microstructure controlled shear band pattern formation and enhanced plasticity of bulk metallic glasses containing in situ formed ductile phase dendrite dispersions. Phys. Rev. Lett. 84, 2901 (2000).
15. U. Kühn, J. Eckert, N. Mattern, and L. Schultz: ZrNbCuNiAl bulk metallic glass matrix composites containing dendritic bcc phase precipitates. Appl. Phys. Lett. 80, 2478 (2002).
16. J. Eckert, U. Kühn, N. Mattern, G. He, and A. Gebert: Structural bulk metallic glasses with different length-scale of constituent phases. Intermetallics 10, 1183 (2002).
17. H. Ma, J. Xu, and E. Ma: Mg-based bulk metallic glass composites with plasticity and high strength. Appl. Phys. Lett. 83, 2793 (2003).
18. L.Q. Xing, J. Eckert, W. Löser, and L. Schultz: High-strength materials produced by precipitation of icosahedral quasicrystals in bulk Zr-Ti-Cu-Ni-Al amorphous alloys. Appl. Phys. Lett. 74, 664 (1999).
19. A. Inoue, T. Zhang, J. Saida, M. Matsushita, M.W. Chen, and T. Sakurai: Structural bulk metallic glasses with different length-scale of constituent phases. Mater. Trans., JIM 40, 1137 (1999).
20. A. Leonhard, L.Q. Xing, M. Heilmaier, A. Gebert, J. Eckert, and L. Schultz: Effect of crystalline precipitations on the mechanical behavior of bulk glass forming Zr-based alloys. Nanostruct. Mater. 10, 805 (1998).
21. C. Fan, A. Takeuchi, and A. Inoue: Preparation and mechanical properties of Zr-based bulk nanocrystalline alloys containing compound and amorphous phases. Mater. Trans., JIM 40, 41 (1999).
22. E. Pekarskaya, C.P. Kim, and W.L. Johnson: In situ transmission electron microscopy studies of shear bands in a bulk metallic glass based composite. J. Mater. Res. 16, 2513 (2001).
23. G. He, J. Eckert, W. Löser, and L. Schultz: Novel Ti-base nanostructure-dendrite composite with enhanced plasticity. Nat. Mater. 2, 33 (2003).
24. G. He, J. Eckert, and W. Löser: In situ formed Ti-Cu-Ni-Sn-Ta nanostructure-dendrite composite with large plasticity. Acta Mater. 51, 5223 (2003).
25. G. He, J. Eckert, W. Löser, and M. Hagiwara: Composition dependence of the microstructure and the mechanical properties of nano/ ultrafine-structured Ti-Cu-Ni-Sn-Nb alloys, Acta Mater. 52, 3035 (2004).
26. D.V. Louzguine, H. Kato, and A. Inoue: High-strength hypereutectic Ti-Fe-Co bulk alloy with good ductility. Philos. Mag. Lett. 84, 359 (2004).
27. J. Das, W. Löser, U. Kühn, J. Eckert, S.K. Roy, and L. Schultz: High-strength Zr-Nb-(Cu,Ni,Al) composites with enhanced plasticity. Appl. Phys. Lett. 82, 4690 (2003).
28. 9.5 in situ composites. Scripta Mater. 49, 1189 (2003).
29. W. Löser, J. Das, A. Güth, H-J. Klauß, C. Mickel, U. Kühn, J. Eckert, S.K. Roy, and L. Schultz: Effect of casting conditions on dendrite-amorphous/nanocrystalline Zr-Nb-Cu-Ni-Al in situ composites. Intermetallics 12, 1153 (2004).
30. P.G. Sanders, J.A. Eastman, and J.R. Weertman: Elastic and tensile behavior of nanocrystalline copper and palladium. Acta Mater. 45, 4019 (1997).
31. Y.M. Wang, M.W. Chen, F.H. Zhou, and E. Ma: High tensile ductility in a nanostructured metal. Nature 419, 912 (2002).
32. J. Schroers and W.L. Johnson: Ductile bulk metallic glass. Phys. Rev. Lett. 93, 255506 (2004).
33. D.S. Sung, O.J. Kwon, E. Fleury, K.B. Kim, J.C. Lee, D.H. Kim, and Y.C. Kim: Enhancement of the glass forming ability of Cu-Zr-Al alloys by Ag addition. Metals Mater. Int. 10, 575 (2004).
34. J. Das, M.B. Tang, K.B. Kim, R. Theissmann, F. Baier, W.H. Wang, and J. Eckert: "Work-hardenable" ductile bulk metallic glass. Phys. Rev. Lett. 94, 205501 (2005).
35. J. Saida, A.D.H. Setyawan, H. Kato, and A. Inoue: Nanoscale multistep shear band formation by deformation-induced nanocrystallization in Zr-Al-Ni-Pd bulk metallic glass. Appl. Phys. Lett. 87, 151907 (2005).
36. 5 bulk metallic glass. Appl. Phys. Lett. 88, 051911 (2006).
37. 1 glass-forming alloy. Scripta Mater. 54, 835 (2006).
38. Y.N. Koval, G.S. Firstov, and A.V. Kotko: Martensitic-transformation and shape memory effect in ZrCu intermetallic compound. Scripta Metall. Mater. 27, 1611 (1992).
39. Z.Y. Liu, M. Aindow, J.A. Hriljac, I.P. Jones, and I.R. Harris: Phase transformations in equiatomic ZrCu alloy. Journal of Metastable and Nanocrystalline Materials 360-362, 223 (2001).
40. Y.F. Sun, B.C. Wei, Y.R. Wang, W.H. Li, T.L. Cheung, and C.H. Shek: Plasticity-improved Zr-Cu-Al bulk metallic glass matrix composites containing martensite phase. Appl. Phys. Lett. 87, 051905 (2005).
41. A.A. Kündig, M. Ohnuma, D.H. Ping, T. Ohkubo, and K. Hono: In situ formed two-phase metallic glass with surface fractal microstructure. Acta Mater. 52, 2441 (2004).
42. R.M. Srivastava, J. Eckert, W. Löser, B.K. Dhindaw, and L. Schultz: Cooling rate evaluation for bulk amorphous alloys from eutectic microstructures in casting processes. Mater. Trans., JIM 43, 1670 (2002).
43. 22.5. Appl. Phys. Lett. 41, 1054 (1982).
44. 50-based alloys. J. Non-Cryst. Solids 351, 1328 (2005).
45. 50+x. Phys. Rev. Lett. 95, 205702 (2005).