Alloy design concepts for refined gamma titanium aluminide based alloys

Intermetallics

Volumn 15, Issue 4, 2007, Pages 451-460

  Imayev, R M ^a   Imayev, V M ^a   Oehring, M ^a   Appel, F ^a  

^a INSTITUTE OF MATERIALS RESEARCH   (Germany)

Author keywords

A. Titanium aluminides, based on TiAl; B. Alloy design; B. Phase transformations; C. Casting; D. Microstructure

Indexed keywords

METAL CASTING; MICROSTRUCTURE; PHASE TRANSITIONS; REACTION KINETICS; SOLIDIFICATION; TITANIUM ALLOYS;

ALLOY DESIGN; INGOT MATERIAL; TITANIUM ALUMINIDES; WROUGHT PROCESSING;

ALLOYING ELEMENTS;

EID: 33947102079     PISSN: 09669795     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.intermet.2006.05.003     Document Type: Article

References (44)

1. Kim Y.-W., and Dimiduk D.M. Designing gamma alloys: fundamentals, strategy and production. In: Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., et al. (Eds). Structural intermetallics 1997 (1997), The Minerals, Metals and Materials Society, Warrendale, PA 531-543
2. Dimiduk D.M., Martin P.L., and Kim Y.-W. Microstructure development in gamma alloy mill products by thermomechanical processing. Mater Sci Eng A243 (1998) 66-76
3. Appel F., and Wagner R. Microstructure and deformation of two-phase γ-titanium aluminides. Mater Sci Eng R22 (1998) 187-268
4. Martin P.L., Hardwick D.A., Clemens D.R., Konkel W.A., and Stucke M.A. Scale-up of ingot metallurgy wrought γ-TiAl. In: Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., et al. (Eds). Structural intermetallics 1997 (1997), The Minerals, Metals and Materials Society, Warrendale, PA 387-394
5. Semiatin S.L., Chesnutt J.C., Austin C., and Seetharaman V. Processing of intermetallic alloys. In: Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., et al. (Eds). Structural intermetallics 1997 (1997), The Minerals, Metals and Materials Society, Warrendale, PA 263-276
6. Naka S., Thomas M., Sanchez C., and Khan T. Development of third generation castable gamma titanium aluminides: role of solidification paths. In: Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., et al. (Eds). Structural intermetallics 1997 (1997), The Minerals, Metals and Materials Society, Warrendale, PA 313-322
7. Brossmann U., Oehring M., and Appel F. Microstructure and chemical homogeneity of high Nb gamma based TiAl alloys in different conditions of processing. In: Hemker K.J., Dimiduk D.M., Clemens H., Darolia R., Inui H., Larsen J.M., et al. (Eds). Structural intermetallics 2001 (2001), The Minerals, Metals and Materials Society, Warrendale, PA 191-201
8. Imayev R.M., Salishchev G.A., Imayev V.M., Shagiev M.R., Kuznetsov A.V., Appel F., et al. Hot deformation of gamma TiAl alloys: fundamentals and application. In: Kim Y.-W., Dimiduk D.M., and Loretto M.H. (Eds). Gamma titanium aluminides 1999 (1999), The Minerals, Metals and Materials Society, Warrendale, PA 565-572
9. Küstner V., Oehring M., Chatterjee A., Güther V., Brokmeier H.-G., Clemens H., et al. An investigation of microstructure formation during solidification of gamma titanium aluminide alloys. In: Kim Y.-W., Clemens H., and Rosenberger A.H. (Eds). Gamma titanium aluminides 2003 (2003), The Minerals, Metals and Materials Society, Warrendale, PA 89-96
10. McCullough C., Valencia J.J., Levi C.G., and Mehrabian R. Phase equilibria and solidification in Ti-Al alloys. Acta Metall 37 (1989) 1321-1336
11. Singh A.K., Muraleedharan K., and Banerjee D. Solidification structure in a cast γ alloy. Scripta Mater 48 (2003) 767-772
12. DeGraef M., Biery N., Rishel L., Pollock T.M., and Cramb A. On the relation between cooling rate and solidification microstructure in as-cast titanium aluminides. In: Kim Y.-W., Dimiduk D.M., and Loretto M.H. (Eds). Gamma titanium aluminides 1999 (1999), The Minerals, Metals and Materials Society, Warrendale, PA 247-254
13. Yamaguchi M., Johnson D.R., Lee H.N., and Inui H. Directional solidification of TiAl-base alloys. Intermetallics 8 (2000) 511-517
14. Jin Y., Wang J.N., Yang J., and Wang Y. Microstructure refinement of cast TiAl alloys by β solidification. Scripta Mater 51 (2004) 113-117
15. Wang Y., Wang J.N., Yang J., and Zhang B. Control of a fine-grained microstructure for cast high-Cr TiAl alloys. Mater Sci Eng A 392 (2005) 235-239
16. Cheng T.T., and Loretto M.H. A preliminary study on the decomposition of the beta phase in Ti-44Al-8Nb and Ti-44Al-4Ta-4Zr-0.2Si. In: Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., et al. (Eds). Structural intermetallics 1997 (1997), The Minerals, Metals and Materials Society, Warrendale, PA 253-260
17. Krishnan M., Natarajan B., Vasudevan V.K., and Dimiduk D.M. Microstructure evolution in gamma titanium aluminides containing beta-phase stabilizers and boron additions. In: Nathal M.V., Darolia R., Liu C.T., Martin P.L., Miracle D.B., Wagner R., et al. (Eds). Structural intermetallics 1997 (1997), The Minerals, Metals and Materials Society, Warrendale, PA 235-244
18. Takeyama M., Ohmura Y., Kikuchi M., and Matsuo T. Phase equilibria and microstructural control of gamma TiAl based alloys. Intermetallics 6 (1998) 643-646
19. Cheng T.T., and Loretto M.H. The decomposition of the beta phase in Ti-44Al-8Nb and Ti-44Al-4Nb-4Zr-0.2Si alloys. Acta Mater 46 (1998) 4801-4819
20. Zhang Z., Leonard K.J., Dimiduk D.M., and Vasudevan V.K. Phase transformations and microstructure evolution in multicomponent gamma titanium aluminides. In: Hemker K.J., Dimiduk D.M., Clemens H., Darolia R., Inui H., Larsen J.M., et al. (Eds). Structural intermetallics 2001 (2001), The Minerals, Metals and Materials Society, Warrendale, PA 515-526
21. Takeyama M., and Kobayashi S. Physical metallurgy for wrought gamma titanium aluminides: microstructure control through phase transformations. Intermetallics 13 (2005) 993-999
22. Kobayashi S., Takeyama M., Motegi T., Hirota N., and Matsuo T. Microstructure control using β-titanium phase for wrought gamma TiAl based alloys. In: Kim Y.-W., Clemens H., and Rosenberger A.H. (Eds). Gamma titanium aluminides 2003 (2003), The Minerals, Metals and Materials Society, Warrendale, PA 165-175
23. 2 volume fraction on the microstructure of a cast near-gamma titanium aluminide alloy. In: Anton D.L., McMeeking R., Miracle D., and Martin P. (Eds). Intermetallic matrix composites. Materials Research Society Symposium Proceeding vol. 194 (1990), Materials Research Society, Pittsburgh, PA 285-292
24. Hyman M.E., McCullough C., Valencia J.J., Levi C.G., and Mehrabian R. Microstructure evolution in TiAl alloys with B additions: conventional solidification. Metall Trans 20A (1989) 1847-1859
25. Inkson B.J., Boothroyd C.B., and Humphreys C.J. Boride morphology in a (Fe, V, B) TiAl alloy containing B2-phase. Acta Metall Mater 43 (1995) 1429-1438
26. Kim Y.-W., and Dimiduk D.M. Effect of boron addition on grain refinement and lamellar formation in wrought-processed gamma TiAl alloys. In: Hemker K.J., Dimiduk D.M., Clemens H., Darolia R., Inui H., Larsen J.M., et al. (Eds). Structural intermetallics 2001 (2001), The Minerals, Metals and Materials Society, Warrendale, PA 625-632
27. 2 titanium aluminide alloys. Scripta Mater 49 (2003) 1047-1052
28. Flower H.M. Microstructure development in relation to hot working of titanium alloys. Mater Sci Technol 6 (1990) 1082-1092
29. Huang S.-C. Alloying considerations in gamma-based alloys. In: Darolia R., Lewandowski J.J., Liu C.T., Martin P.L., Miracle D.B., and Nathal M.V. (Eds). Structural intermetallics (1993), The Mineral, Metals and Materials Society, Warrendale, PA 299-307
30. Chen G.L., Zhang W.J., Wang Y., Wang J., Sun Z., Wu Y., et al. Ti-Al-Nb intermetallic alloys based on the ternary intermetallic compound. In: Darolia R., Lewandowski J.J., Liu C.T., Martin P.L., Miracle D.B., and Nathal M.V. (Eds). Structural intermetallics (1993), The Mineral, Metals and Materials Society, Warrendale, PA 319-334
31. Nakamura H., Takeyama M., Yamabe Y., and Kikuchi M. Phase equilibria in TiAl alloys containing 10 and 20 at.% Nb at 1473 K. Scripta Metall Mater 28 (1993) 997-1002
32. Nakamura H., Takeyama M., Wei L., Yamabe Y., and Kikuchi M. Phase equilibria among the α, β and γ phases in the Ti-Al-X (V, Nb, Cr, Mo) systems at 1473 and 1573 K. In: Yamaguchi M., and Hukutomi H. (Eds). Proceedings of third Japan international SAMPE symposium and exhibition (1993), SAMPE 1353-1358
33. 2, β and γ phases in ternary Ti-Al-X systems at elevated temperatures. In: Blenkinsop P.A., Evans W.J., and Flowers H.M. (Eds). Titanium '95, Proceedings of the world conference vol. 1 (1996), The Institute of Metals 294-301
34. Paul J.D.H., Appel F., and Wagner R. The compression behaviour of niobium alloyed γ-titanium aluminides. Acta Mater 46 (1998) 1075-1085
35. 0) phases in Ti-Al base ternary alloys. Intermetallics 8 (2000) 855-867
36. Appel F., Paul J.D.H., Oehring M., Fröbel U., and Lorenz U. Creep behaviour of TiAl alloys with enhanced high-temperature capability. Metall Mater Trans 34A (2003) 2149-2164
37. Herzig Ch., Przeorski T., Friesel M., Hisker F., and Divinski S. Tracer solute diffusion of Nb, Zr, Cr, Fe, and Ni in γ-TiAl: effect of preferential site occupation. Intermetallics 9 (2001) 461-472
38. Cheng T.T. On the mechanism of boron-induced grain refinement in TiAl-based alloys. In: Kim Y.-W., Dimiduk D.M., and Loretto M.H. (Eds). Gamma titanium aluminides 1999 (1999), The Minerals, Metals and Materials Society, Warrendale, PA 389-396
39. Ohnuma I., Fujita Y., Mitsui H., Ishikawa K., Kainuma R., and Ishida K. Phase equilibria in the TiAl binary system. Acta Mater 48 (2000) 3113-3123
40. Takeyama M., Yamamoto Y., Nagaki M., Hashimoto K., and Matsuo T. Effect of Nb on lamellar orientation control of single crystal gamma Ti-Al alloys with fully lamellar microstructures. In: Kim-Y W., and Carneiro T. (Eds). Niobium for high temperature applications (2004), The Minerals, Metals and Materials Society, Warrendale, PA 253-265
41. Johnson D.R., Inui H., Muto S., Omiya Y., and Yamanaka T. Microstructural development during directional solidification of α-seeded TiAl alloys. Acta Mater 54 (2006) 1077-1085
42. Hunziker O., Vandyoussefi M., and Kurz W. Phase and microstructure selection in peritectic alloys close to the limit of constitutional undercooling. Acta Mater 46 (1998) 6235-6336
43. Park H.S., Nam S.W., Kim N.J., and Hwang S.K. Refinement of the lamellar structure in TiAl-based intermetallic compound by addition of carbon. Scripta Mater 41 (1999) 1197-1203
44. Christoph U., Appel F., and Wagner R. Dislocation dynamics in carbon-doped titanium aluminide alloys. Mater Sci Eng A239-240 (1997) 39-45