Current experimental basis for modeling ice accretions on swept wings

Journal of Aircraft

Volumn 44, Issue 1, 2007, Pages 274-290

  Vargas, Mario ^a,b,c  

^a NASA GLENN RESEARCH CENTER   (United States)

^b Icing Branch   (United States)

^c AIAA   (United States)

Author keywords

[No Author keywords available]

Indexed keywords

MATHEMATICAL MODELS; WINGS;

ICE ACCRETIONS; MACROSCOPIC MECHANISMS; SCALLOP FORMATIONS; SWEPT WINGS;

ICE;

EID: 33847735163     PISSN: 00218669     EISSN: 15333868     Source Type: Journal    
DOI: 10.2514/1.23323     Document Type: Article

References (44)

1. Von Glahn, U. H., and Gray, V. H., "Effect of Ice Formations on Section Drag of Swept NACA 63A-009 Airfoil with Partial-Span Leading-Edge Slat for Various Modes of Thermal Ice Protection," NACA RM E53J30, March 1954.
2. Hedde, T., and Guffond, D., "Improvement of the ONERA 3D Icing Code, Comparison with 3D Experimental Shapes," AIAA Paper 93-0169, Jan. 1993.
3. Vargas, M., "Ice Accretion on Swept Wings at Glaze Ice Conditions," Ph.D. Dissertation, Mechanical and Aerospace Engineering Dept., Case Western Reserve Univ., Cleveland, OH, 1998.
4. Vargas, M., and Reshotko, E., "Physical Mechanisms of Glaze Ice Scallop Formations on Swept Wings," AIAA Paper98-0491, Jan. 1998; also NASA TM-1998-206616.
5. Bowden, D. T., "Investigation of Porous Gas-Heated Leading-Edge Section for Icing Protection of a Delta Wing," NACA RM E54I03, Jan. 1955, pp. 9, 35, 36.
6. Rush, C. K., "The Icing of Delta Wings of Unity Aspect Ratio Having Leading Edge Separation," National Research Laboratories Report LR-268, Ottawa, Canada, Dec. 1959.
7. Wilder, R. W., "A Theoretical and Experimental Means to Predict Ice Accretion Shapes for Evaluating Aircraft Handling and Performance Characteristics," AGARD Advisory Report No. 127, Aircraft Icing, Nov. 1978.
8. Laschka, B., and Jesse, R. E., "Ice Accretion and Its Effects on Aerodynamics of Unprotected Aircraft Components," AGARD Advisory Report No. 127, Aircraft Icing, Nov. 1978.
9. Pierre, M., and Vaucheret, X., "Icing Test Facilities and Test Techniques in Europe," AGARD Advisory Report No. 127, Aircraft Icing, Nov. 1978.
10. Armand, C., Charpin, F., Fasso, G., and Leclere, G., "Techniques and Facilities used at the ONERA Mondane Center," AGARD Advisory Report No. 127, Aircraft Icing, Nov. 1978.
11. Reehorst, A. L., "Prediction of Ice Accretion on a Swept NACA 0012 Airfoil and Comparisons to Flight Test Results," AIAA Paper 92-0043, Jan. 1992.
12. Hansman, R., Breuer, K., Hazan, D., Reehorst, A. L., and Vargas, M., "Close-up Analysis of Aircraft Ice Accretion," AIAA Paper 93-0029, Jan. 1993.
13. Reehorst, A. L., Ratvasky, T. P., and Sims, J., "Close-up Analysis of Inflight Ice Accretion," AIAA Paper 94-0804, Jan. 1994.
14. Olsen, W., and Walker, E., "Experimental Evidence for Modifying the Current Physical Model for Ice Accretion on Aircraft Surfaces," NASA TM-87184, 1986.
15. Vargas, M., and Reshotko, E., "Parametric Experimental Study of the Formation of Glaze Ice Shapes on Swept Wings," AIAA Paper 99-0094, Jan. 1999.
16. Vargas, M., and Reshotko, E., "LWC and Temperature Effects on Ice Accretion Formation on Swept Wings at Glaze Ice Conditions," AIAA Paper 2000-00483, Jan. 2000.
17. Vargas, M., Giriunas, J., and Ratvasky, T., "Ice Accretion Formations on a NACA 0012 Swept Wing Tip in Natural Icing Conditions," AIAA Paper 2002-0244, Jan. 2002.
18. Vargas, M., Papadakis, M., Potapczuk, M., Addy, H., Sheldon, D., and Giriunas, J., "Ice Accretions on a Swept GLC-305 Airfoil," SAE Paper 02GAA-43, April 2002; also NASA TM-2002-211557.
19. Potapczuk, M., Papadakis, M., and Vargas, M., "LEWICE Modeling of Swept Wing Ice Accretions," AIAA Paper 2003-6565, Jan. 2003.
20. Papadakis, M., Yeong, H. W., Wong, S. C., Vargas, M., and Potapczuk, M., "Aerodynamic Performance of a Swept Wing with Ice Accretions," AIAA Paper 2003-0731, Jan. 2003.
21. Papadakis, M., Yeong, H. W., Wong, S. C., Vargas, M., and Potapczuk, M., "Experimental Investigation of Ice Accretion Effects on a Swept Wing," FAA Contractor Report DOT/FAA/AR-05/39, Aug. 2005.
22. Shin, J., "Characterization of Surface Roughness Associated with Leading Edge Ice Accretion," NASA TM 106459, Jan. 1994; also AIAA Paper 94-0799.
23. Anderson, D. N., and Shin, J., "Characterization of Ice Roughness from Simulated Icing Encounters," NASA TM 107400, Jan. 1997; also AIAA Paper 97-0052.
24. Anderson, D. N., Hentschel, D., and Ruff, G., "Measurement and Correlation of Ice Accretion Roughness," AIAA Paper 98-0486,1998; also NASA CR 2003-211823, June 2003.
25. Tsao, J. C., "Cross Flow Effects on Glaze Ice Roughness Formation," AIAA Paper 2003-1219, Jan. 2003.
26. Tsao, J, C., and Rothmayer, A. P., "Application of Triple-Deck Theory to the Prediction of Glaze Ice Roughness Formation on an Airfoil Leading Edge," Computers and Fluids, Vol. 31, No. 8, 2002, pp. 977-1014.
27. Tsao, J. C., Rothmayer, A. P., and Ruban, A. I., "Stability of Air Flow Past Thin Liquid Films on Airfoils," Computers and Fluids, Vol. 26, No. 5, 1997, pp. 427-452.
28. Tsao, J. C., and Rothmayer, A. P., "A Mechanism for Ice Roughness Formation on an Airfoil Leading Edge, Contributing to Glaze Ice Accretion," AIAA Paper 98-0485, Jan. 1998.
29. Saric, W. S., "Laminar-Turbulent Transition: Fundamentals," AGARD Report No. 786 (Special Course on Skin Friction Drag Reduction), Rhode-St.Genese, Belgium, 1992.
30. Reed, H. L., and Saric, W. S., "Stability of Three-Dimensional Boundary Layers," Annual Review of Fluid Mechanics, Vol. 21, 1989, pp. 235-284.
31. Amal, D., "Three-Dimensional Boundary Layers: Laminar-Turbulent Transition," AGARD Report No. 741 (Computation of Three-Dimensional Boundary Layers Including Separation), Rhode-St.Genese, Belgium, 1986.
32. Dagenhart, J. R., Saric, W. S., Mousseux, M., and Stack, J. P., "Crossflow-Vortex Instability and Transition on a 45-Degree Swept Wing," AIAA Paper 89-1892, June 1989.
33. Poll, D. I. A., "Transition Description and Prediction in Three-Dimensional Flows," AGARD Report No, 709 (Special Course on Stability and Transition of Laminar Flows), VKI, Brussels, 1984.
34. Reshotko, E., Vargas, M., and Reed, H. L., "Relation of Glaze Ice Formations on Swept Wings to Crossflow Instability," LaminarTurbulent Transition, IUTAM Symposium, edited by H. F. Fasel and W. S. Saric, Springer-Verlag, 2000, pp. 577-581.
35. Reshotko, E., Vargas, M., and Reed, H., "Ice Formation on Swept Wings-Relation to Crossflow Instability," Bulletin of the American Physical Society, Vol. 43, No. 9, 1998, p. 1993.
36. Kerho, M. F., "Effect of Large Distributed Roughness Near an Airfoil Leading Edge on Boundary-Layer Development and Transition," Ph.D. Dissertation, Univ. of Illinois at Urbana-Champaign, Urbana, IL, 1995.
37. Cummings, M. J., "Airfoil Boundary-Layer Transition Due to Large Isolated 3-D Roughness Elements in a Favorable Pressure Gradient," M.S. Thesis, Univ. of Illinois at Urbana-Champaign, Urbana, IL, 1995.
38. Winkler, J. F., "Local Flowfleld About Large Distributed Roughness Elements in a Laminar Boundary Layer," Ph.D. Dissertation, Univ. of Illinois at Urbana-Champaign, Urbana, IL, 1996.
39. Lee, S., "Heat Transfer on an Airfoil with Large Distributed LeadingEdge Roughness," M.S. Thesis, Univ. of Illinois at Urbana-Champaign, Urbana, IL, 1997.
40. Henry, R. C., Hansman, R. J., and Breuer, K. S., "Heat Transfer Variation on Protuberances and Surface Roughness Elements," Journal of Thermophysics and Heat Transfer, Vol.9, No. 1, 1995, pp. 175-180.
41. McClain, S. T., Vargas, M., Kreeger, R. E., and Tsao, J. C., "Heat Transfer from Roughness Elements and Protuberances: A Reexamination of Henry et al.," Journal of Thermophysics and Heat Transfer, 2006 (to be published).
42. Kreeger, R. E., Vargas, M., and McClain, S. T., "Heat Transfer over Roughness Elements Larger than the Boundary Layer," AIAA Paper 2005-5186, June 2005.
43. Matheis, B. D., and Rothmayer, A. P., "Impact of Surface Roughness on Local Aerodynamics Using a Three-Dimensional Navier-Stokes Solver," AIAA Paper 2004-0058, Jan. 2004.
44. White, E., and Oliver, M., "Experiments on Surface Roughness Effects in Ice Accretion," AIAA Paper 2005-5190, June 2005.