A global rheological model of wood cantilever as applied to wood drying

Wood Science and Technology

Volumn 41, Issue 3, 2007, Pages 209-234

  Moutee, Mohssine ^a   Fortin, Yves ^a   Fafard, Mario ^a  

^a UNIVERSITÉ LAVAL   (Canada)

Author keywords

[No Author keywords available]

Indexed keywords

DRYING; RHEOLOGY; STRESSES;

KELVIN ELEMENT MODEL; WOOD CANTILEVERS; WOOD DRYING;

WOOD;

DRYING; RHEOLOGICAL PROPERTIES; STRESSES; WOOD;

EID: 33847728641     PISSN: 00437719     EISSN: None     Source Type: Journal    
DOI: 10.1007/s00226-006-0106-5     Document Type: Article

References (29)

1. Allegretti O, Rémond R, Perré P (2003) A new experimental device for non-symmetrical drying tests. Experimental and numerical results for free and constrained samples. In: Proceedings of the 8th international IUFRO wood drying conference. Brasov, Romania, pp 65-70
2. Bingham EC (1922) Fluidity and plasticity. McGraw-Hill, New York
3. Dahlblom O, Petersson H, Omarsson S (2001) Full 3-D FEM-simulations of drying distortions in spruce boards based on experimental studies. In: Proceedings of the 7th international IUFRO wood drying conference. Tsukuba, Japan, pp 246-251
4. Dinwoodie JM, Paxton BH, Bonfleld PW, Mundy JS (1995) Fatigue and creep in chipboard. Part 2. The influence of slow cyclic fatigue on the creep behavior of chipboard at a range of stress levels and moisture contents. Wood Sci Technol 29:64-76
5. Fortin Y, Naderi N, Laforest P, Cloutier A (1999) Viscoelastic and mechano-sorptive creep measurements of spruce wood in the longitudinal direction under kiln drying conditions. In: Proceedings of the 6th international IUFRO wood drying conference. Stellenbosch, South Africa, pp 225-226
6. Foudjet A, Bremond C (1989) Creep of four tropical hardwoods from Cameroon. Wood Sci Technol 23:335-341
7. Guitard D (1987) Mécanique du matériau bois et composites. Eds.; CEPADUES: Toulouse, France, 238 pp
8. Hanhijärvi A (2000) Deformation properties of Finnish spruce and pine wood in tangential and radial directions in association to high temperature drying. Part 3. Experimental results under drying conditions (mechano-sorptive creep). Holz Roh- Werkst 58:63-71
9. Haque MN, Langrish TAG, Keep LB, Keey RB (2000) Model fitting for visco-elastic creep of Pinus radiata during kiln drying. Wood Sci Technol 34:447-457
10. Kingston RST, Budgen B (1972) Some aspects of the Theological behavior of wood. Part 4. Nonlinear behavior at high stresses in bending and compression. Wood Sci Technol 6:230-238
11. Mårtensson A (1994) Mechano-sorptive effects in wooden material. Wood Sci Technol 28:437-449
12. Mårtensson A, Svensson S (1997) Stress-strain relationship of drying wood. Part 1. Development of a constitutive model. Holzforschung 51:472-478
13. Miller DG, George P (1974) A method of measuring creep and recovery due to flexural loads of short duration. Wood Sci 7(2): 1.53-159
14. Moutee M, Laghdir A, Fafard M, Fortin Y (2002) A three-dimensional mathematical model of the hygro-thermo-mechanical behavior of wood during drying. In: Proceedings of forest product society conference "Quality Drying: The Key to Profitable Manufacturing". Montreal, Canada, pp 179-184
15. Moutee M, Fafard M, Fortin Y, Laghdir A (2005) Modeling the creep behavior of wood cantilever loaded at free end during drying. Wood Fiber Sci 37(3):521-534
16. Ormarsson S, Dahlblom O, Petersson H (1999) A numerical study of the shape stability of sawn timber subjected to moisture variation. Part 2. Simulation of drying board. Wood Sci Technol 33:407-423
17. Pang S (2001) Modeling of stresses and deformation of Radiata Pine lumber during drying. In: Proceedings of the 7th international IUFRO wood drying conference. Tsukuba, Japan, pp 238-245
18. Perré P, Passard J (2004) A physical and mechanical model able to predict the stress field in wood over a wide range of drying conditions. Dry Technol 22(1-2):27-44
19. Ranta-Maunus A (1990) Impact of mechano-sorptive creep to the long-term strength timber. Holz Roh-Werkst 48:67-71
20. Ranta-Maunus A (1992)Determination of drying stress in wood when shrinkage is prevented: test method and modeling. In: Proceedings of the 3rd international IUFRO wood drying conference. Vienna, Austria, pp 139-144
21. Ranta-Maunus A (1993) Rheological behaviour of wood in directions perpendicular to the grain. Mater Struct 26:362-369
22. Rice RW, Youngs RL (1990) The mechanism and development of creep during drying of red oak. Holz Roh-Werkst 48:73-79
23. Salin JG (1989) Prediction of checking, surface discoloration and final moisture content by numerical methods. In: Kayihan F, Johnson JA, Smith WR (eds) Upgrading wood quality through drying technology. International Union of Forestry Research Organisations, Washington, pp. 222-225
24. Salin JG (1992) Numerical prediction of checking during timber drying a new mechano-sorptive creep model. Holz Roh-Werkst 50:195-200
25. Shames IH, Cozzarelli FA (1992) Elastic and inelastic stress analysis. Prentice-Hall, Englewood Cliffs, New Jersey
26. Svensson S (1995) Strain and shrinkage force in wood under kiln drying conditions. Part 1. Measuring strain and shrinkage under controlled climate conditions. Equipment and preliminary results. Holzforschung 49(4):363-368
27. Svensson S (1996) Strain and shrinkage force in wood under kiln drying conditions. Part 2. Strain, shrinkage and stress measurements under controlled climate conditions. Equipment and preliminary results. Holzforschung 50(5):463-469
28. Wu Q, Milota MR (1995) Rheological behavior of Douglas-fir perpendicular to the grain at elevated temperatures. Wood Fiber Sci 27(3):285-295
29. Wu Q, Milota MR (1996) Mechano-sorptive deformation of Douglas-Fir specimens under tangential tensile stress during moisture adsorption. Wood Fiber Sci 28(1):128-132