Stabilisation/solidification of synthetic petroleum drill cuttings

Journal of Hazardous Materials

Volumn 141, Issue 2, 2007, Pages 410-421

  Al Ansary, Marwa S ^a   Al Tabbaa, Abir ^a  

^a UNIVERSITY OF CAMBRIDGE   (United Kingdom)

Author keywords

Binders; Oil drill cuttings; Petroleum wastes; Stabilisation solidification; Waste re use

Indexed keywords

CONCENTRATION (PROCESS); LAND FILL; OIL WELL DRILLING; PORTLAND CEMENT; SLAGS; WASTE TREATMENT;

MICROSTRUCTURAL ANALYSIS; OIL DRILL CUTTINGS; PETROLEUM WASTES;

WASTE UTILIZATION;

CALCIUM OXIDE; CHLORIDE; HYDROCARBON; MAGNESIUM OXIDE; OIL; PETROLEUM; SILICON DIOXIDE;

CONCENTRATION (PROCESS); LAND FILL; OIL WELL DRILLING; PORTLAND CEMENT; SLAGS; WASTE TREATMENT; WASTE UTILIZATION;

CHLORIDE; CONCENTRATION (COMPOSITION); DRILLING; HAZARDOUS WASTE; HYDROCARBON; LANDFILL; LEACHING; SOLIDIFICATION; STABILIZATION; WASTE TREATMENT;

ARTICLE; ATLANTIC OCEAN; CEMENT INDUSTRY; CHEMICAL BINDING; CHEMICAL STRUCTURE; COMPRESSIVE STRENGTH; CONCENTRATION (PARAMETERS); DRILL; HAZARDOUS WASTE; INDUSTRIAL WASTE; LANDFILL; LANDFILL LEACHATE; LEACHING; MOLECULAR WEIGHT; RECYCLING; SLAG; STRUCTURE ANALYSIS; UNITED KINGDOM;

ADSORPTION; CHLORIDES; COMPRESSIVE STRENGTH; HAZARDOUS WASTE; HYDROCARBONS; HYDROGEN-ION CONCENTRATION; INDUSTRIAL WASTE; MICROSCOPY, ELECTRON, SCANNING; OILS; PARAFFIN; REFUSE DISPOSAL; WATER POLLUTANTS, CHEMICAL;

ATLANTIC OCEAN; INDIAN OCEAN; NORTH SEA; RED SEA [INDIAN OCEAN];

EID: 33847316141     PISSN: 03043894     EISSN: None     Source Type: Journal    
DOI: 10.1016/j.jhazmat.2006.05.079     Document Type: Article

References (39)

1. EU Commission Decision's 2001/118/EC Amending Decision 2000/532/EC as Regards the List of Wastes, Text from the Official Journal of the European Communities L47, 16 February 2001.
2. Bell N., Cripps S.J., Jacobsen T., Kjeilan G., and Picken G.B. Review of Drill Cuttings Piles in the North Sea (1998), Cordah, UK
3. B. Roddie, A. Skadsheim, D. Runciman, G. Kjeilen, Project 1.2: Cuttings Pile Toxicity, UKOOA and Rogland Research, UK and Norway, 1999.
4. J. Wills, A Survey of Offshore Oilfield Drilling Wastes and Disposal Techniques to Reduce the Ecological Impact of Sea Dumping: Environmental Effects of Drilling Waste Discharges, Environmental Impact of Offshore Oil and Gas Exploration and Production, 2000. http://www.offshore-environment.com/drillingwasteconclusion.html.
5. Decision 2000/3 on the Use of Organic-Phase Drilling Fluids (OPF) and the Discharge of OPF-Contaminated Cuttings, OSPAR Commission, 2000.
6. Decision 92/2 on the Use of Oil-Based Muds, Oslo-Paris Convention for the Protection of the Marine Environment of the North-East Atlantic, OSPAR Commission, 1999.
7. Egyptian Environmental Law No. 4/1994 and its Executive Regulations: Promulgating a Law Concerning Environment. 1st ed. (1994), Al Matbaa El Ameraya, Egypt
8. Conner J.R., and Hoeffner S.L. The history of stabilization/solidification technology. Environ. Sci. Technol. 28 4 (1998) 325-396
9. Smith M., Manning A., and Lang M. The Re-Use of Drill Cuttings Onshore (1999), Cordah, UK
10. Page P.W., Greaves C., Lawson R., Hayes S., and Boyle F. SPE 80583: Options for the recycling of drill cuttings. Proceedings of the SPE/EPA/DOE Exploration and Production Environmental Conference. San Antonio, TX, USA (2003)
11. Tuncan A., Tuncan M., and Koyuncu H. Use of petroleum-contaminated drilling wastes as sub-base material for road construction. Waste Manage. Resour. 18 (2000) 489-505
12. Boutemeur R., Haddi A., Bali A., and Boutemeur N. Use of petroleum waste as sub-base material for road construction. Proceedings of the International Symposium on Advances in Waste Management and Recycling. Dundee (2003)
13. Breuer E., Stevenson A.G., Howe J.A., Carroll J., and Shimmield G.B. Drill cutting accumulations in the northern and central North Sea: a review of environmental interactions and chemical fate. Mar. Pollut. Bull. 48 (2004) 12-25
14. BP, British Petroleum-Egypt, Ras Shukier Site, Monthly Progress Reports, 2003.
15. UKOOA Report on Task 5B, In-situ Solutions: Covering, UKOOA, UK, 2002.
16. Westerlund S., Eriksen V., Beyer J., and Kjeilen G. Characterization of the Cuttings Piles at the Beryl A and Ekofisk 2/4 A Platform (2001), Rogaland Research, Norway
17. UKOOA Report on Drilling Cuttings Initiative, UKOOA, UK, 2001.
18. Al-Ansary M.S., and Al-Tabbaa A. Stabilisation/solidification of synthetic North Sea drill cuttings containing oil and chloride. Proceedings of the International RILEM Conference on Use of Recycled Materials in Building and Structures, vol. 2. Barcelona (2004) 833-842
19. Al-Ansary M.S., and Al-Tabbaa A. Stabilisation/solidification of synthetic drill cuttings representing Ras Shukier oil field in Egypt. Proceedings of the International Conference on Stabilisation/Solidification Treatment and Remediation. Cambridge, UK, Balkema (2005) 19-29
20. Harrison A.J.W. The case for and ramification of blending reactive magnesia with Portland cement. Presented at the Conference on Our World in Concrete Structures. Singapore, August (2003) 17 p
21. Standard Test Method for Compressive Strength of Molded Soil-Cement Cylinders, ASTM D1633-00, ASTM International, 1995.
22. K. Lewin, K. Bradshaw, N.C. Blakey, J. Turrell, S.M. Hennings, R.J. Flavin, Leaching Test for Assessment of Contaminated Land, Interim NRA Guidance, UK, 1994.
23. Characterization of Waste-Leaching-Compliance Test for Leaching of Granular Waste Materials and Sludges, Parts 1-4, BS EN 12457, British Standards Institution, London, UK, 2002.
24. ® Absorbents Mat New" 460 data sheet, Pig Corp., USA, 2004. http://www.newpig.com.
25. APHA 5520B, Partition-Gravimetric Method for Oil and Grease: Standard Methods for the Examination of Wastewater. 20th ed. (1995), American Public Health Association, American Water Works Association, Water Environment Federation
26. Watts D.J., and Zimmer I.B. Potential options and manufacturing changes for ethyl ether in support of pollution prevention. Proceedings of the HSRC/WERC Joint Conference on the Environment. Great Plains/Rocky Mountain Hazardous Substance Research Centre, May (1996)
27. LaGrega M.D., Buckingham P.L., and Evans J.C. Hazardous Waste Management (1994), McGraw Hill, Inc., New York
28. C.W. Evans, Studies related to the in situ treatment of contaminated ground using soil mix technology, Ph.D. Thesis, University of Birmingham, 1998.
29. Meegoda J.N., Ezeldin A.S., Fang H.-Y., and Inyang H.I. Waste immobilization technologies. Pract. Period. Hazard. Toxic Radioact. Waste Manage. 7 1 (2003) 46-58
30. Precast Concrete Masonry Units. Part 1: Specification for Precast Concrete Masonry Units, BS 6073, British Standards Institution, London, UK, 1981.
31. Luping T., and Nilsson L.-O. Chloride binding capacity and binding isotherms of OPC pastes and mortars. Cement Concrete Res. 23 (1993) 247-253
32. Arya C., Buenfeld N.R., and Newman J.B. Factors influencing chloride-binding in concrete. Cement Concrete Res. 20 (1990) 291-300
33. Jensen H.-U., and Pratt P.L. The binding of chloride ions by pozzolanic product in fly ash cement blends. Adv. Cement Res. 2 7 (1989) 121-129
34. Justnes H. A Review of Chloride Binding in Cementitious Systems, Publication No. 21, 1/98 (1998), Nordic Concrete Research pp. 48-63
35. Environmental Agency Guidance on Sampling and Testing of Wastes to Meet Landfill Waste Acceptance Procedures, Version 4.3a, EA, UK, December 2003.
36. Gleise P.J.P., Muller A., and Roman H.R. Microstructural investigation of a silica fume-cement-lime mortar. Cement Concrete Comp. 25 (2003) 171-175
37. P.L. Pratt, O.A. Onabolu, Long Term Durability of Grouts in Marine Environments, Health and Safety Executive, Offshore Technology Report, HMSO, London, 1992.
38. Montgomery D.M., Sollars C.J., Perry R., Tarling S.E., Barnes P., and Henderson E. Treatment of organic-contaminated industrial wastes using cement-based stabilization/solidification. I. Microstructural analysis of cement-organic interactions. Waste Manage. Res. 9 (1991) 103-111
39. Li G., and Xhao X. Properties of concrete incorporating fly ash and ground granulated blast-furnace slag. Cement Concrete Comp. 25 (2003) 293-299